• Applied Biological Chemistry
• /
• 제25권4호
• /
• pp.248-251
• /
• 1982

3가지 단백질과 CBG250과의 반응에 의해서 생성되는 복합체(複合體)의 분광학적(分光學的) 성질(性質)과 결합당량(結合當量)을 측정(測定)하였다. CBG250은 사용한 몇 가지 용매(溶媒)에 따라 최대흡광파장(最大吸光波長)$({\lambda}_m)$이 이동(移動)하였으며, ethanol용액 중 $({\lambda}_m=610nm)$에서 흡광계수(吸光係數)는 82.4, 몰 흡광계수(吸光係數)는 $70.4{\times}10^3$이었다. CBG250은 ethanol―인산(燐酸)―수용액(水溶液)에서 갈색$({\lambda}_m=465nm)$을 가지나 일단 단백질과 결합하면 청색(靑色)$({\lambda}_m=590nm)$으로 변환되었으며, 파장(波長) 590nm에서의 흡광도(吸光度)와 단백질 함량(含量) 사이에는 제한된 범위에서 비례관계를 나타냈다. 반응조건에서 단백질과 CBG250은 신속하게 복합체(複合體)를 형성하였다. 단백질의 CBG250에 대한 결합당량(結合當量)은 단백질의 종류(種類)와 함량(含量)에 따라 현저하게 변하였다. BSA, Cytochrome C, ${\gamma}-globulin$의 그것은 각각 110, 103, $88{\mu}g\;$CBG250/100{\mu}g$ protein이었다.

• Computers and Concrete
• /
• 제13권6호
• /
• pp.695-707
• /
• 2014

This study investigated the chloride binding isotherms of various cement types, especially the contributions of C-S-H and AFm hydrates to the chloride binding isotherms were determined. Ordinary Portland cement (OPC), Modified cement (MC), Rapid-hardening Portland cement (RHC) and Low-heat Portland cement (LHC) were used. The total chloride contents and free chloride contents were analyzed by ASTM. The contents of C-S-H, AFm hydrates and Friedel's salt were determined by X-ray diffraction Rietveld (XRD Rietveld) analysis. The results showed that OPC had the highest chloride binding capacity, and, LHC had the lowest binding capacity of chloride ions. MC and RHC had very similar capacities to bind chloride ions. Experimental equations which distinguish the chemically bound chloride and physically bound chloride were formulated to determine amounts of the bound chloride basing on chloride binding capacity of hydrates.

• 한국식품영양과학회지
• /
• 제23권3호
• /
• pp.414-419
• /
• 1994

This study was trying to find what physical changes occurred to albumin when it reacted with estrogen and other ligands. Each concentration of human serum albumin with 100$\mu$l estradiol reacted at the highest binding capacity of 280nm. In addition, 1 hr of reaction time showed the highest binding rate. Conformational changes in human serum albumin with dietylstillbesterol and N-ethyl-maleimide produced strong binding capacities. The changes were immediate and they did not increase or decrease over time. Effects of human serum albumin with estriol induced no interaction each other. The binding capacity of human serum albumin with vitamin D$_2$was lower than estradiol. and the highest binding rate showed 1 hr of reaction time. Vitamin D$_2$ was very similar to the binding capacity of estradiol.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3788-3792
• /
• 2012

Spherical-shape melanin nanoparticles with good water-dispersibility were successfully synthesized by a simple oxidation polymerization of 3,4-dihydroxy-phenylalanin (DOPA) with $KMnO_4$. Similar features to those known from natural and synthetic melanin polymers were observed from prepared melanin nanoparticles by FT-IR, UV-Vis., and ESR spectroscopic methods. Their binding ability with several heavy metal ions from aqueous solution was quantitatively investigated, and the maximum binding capacities with melanin nanoparticles to lead, copper, and cadmium ions were obtained as 2.45, 2.17 and 1.88 mmol/g, respectively, which are much larger values than those reported from natural and synthetic melanin polymers. The large binding capacity and fast binding rate of melanin nanoparticles to metal ions can make them an excellent candidate for the remediation of contaminated water.

• 한국수산과학회지
• /
• 제37권5호
• /
• pp.359-365
• /
• 2004

To study the lipid adsorption characteristic of chitosans with different molecular weights and the degrees of deacetylation, in vitro test and near-infrared (NIR) spectroscopic analysis have been performed for the measurement of lipid adsorption characteristics of chitosan. The degrees of deacetylation in chitosans were $70{\%},\;85{\%}\;and\;92{\%}$ at different deacetylation times (1 hr, 2 hrs, 3 hrs), respectively. The molecular weight of each chitosan was controlled by enzymatic hydrolysis, and then the molecular weight of the chitosan was 4 kDa. The bulk density, water holding capacity and fat binding capacity of each chitosan powder were $96.2-504.0{\%},\;374.4-1217.9{\%},\;and\;307.0-659.3{\%}$, respectively. The higher molecular weight of chitosan was exhibited the lower bulk density and the higher water and fat binding capacities. Bindinf capacities of chitosan powders to bile salts, cholesterol and linoleic acid were $41.2-63.3{\%},\;40.8-67.4{\%},\;42.6-72.6{\%}$, respectively. In NIR spectrum of lipid adsorbed chitosan the occurrence static eletronical binding between chitosan and lipid was identified by NIR spectrum peak induced from combination of carboxylic group in lipid and amino group in chitosan. In conclusion, the higher degree of deacetylation and molecular weight of chitosan showed the higher lipid binding capacity and the lipid adsorption of chitosan were occurred by combination of carboxylic group in lipids and amino group in chitosan.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권2호
• /
• pp.89-94
• /
• 2001

The binding of cellobiohydrolases to cullulose is a crucial initial step in cellulose hydrolysis. In the search for a detailed understanding of the function of cellobiohydrolases, much information concerning how the enzymes and their constituent catalytic and cellulose-binding changes during hydrolysis is still needed. The adsorption of purified two cellobiohydrolases (Ce17A and Ce16A) from Trichoderma reesei cellulase to microcrystalline cellulose has been studied. Cellobiohydrolase II (Ce16A) does not affect the adsorption of cellobiohydrolase I (Ce17A) significantly, and there are specific binding sites for both Ce17A and Ce16A. The adsorption affinity and tightness of the cullulase binding domain (CBD) for Ce17A are larger than those of the CBD for Ce16A. The CBD for Ce17A binds more rapidly and tightly to Avicel than the CBD for Ce16A. The decrease in adsorption observed when the two cellobihydrolases are studied together would appear to be the result of competition for binding sites on the cellulose. Ce17A competes more efficiently for binding sites than Ce16A. Competition for binding sites is the dominating factor when the two enzymes are acting together, furthermore adsorption to sites specific for Ce17A and Ce16A, also contributes to the total adsorption.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권10호
• /
• pp.1484-1489
• /
• 2006

This study was carried out to investigate the effect of high pressure and the addition of non-meat proteins on the physico-chemical and binding properties of restructured pork. Pressurizations were carried out at up to 200 MPa and non-meat proteins used as a binder were isolated soy protein (ISP), sodium caseinate (SC), whey protein concentrate (WPC) and egg white powder (EWP). The pH values of all treatments were affected by the level of pressure. $L^*$-value of all treatments increased significantly (p<0.05), while both $a^*$-value and $b^*$-value of all treatments showed a significant decrease (p<0.05) with increasing pressure level. Binders could contribute only additive effects on both pH and color of the treatments. It was found that high pressure improved the water binding capacities and binding strength of the treatments. Binders also improved the binding strength of restructured pork. However, SC and WPC had no effect on water binding properties under high pressure. These results indicate that the application of high pressure had more significant effect on restructuring meat than binders.

• 한국식품조리과학회지
• /
• 제27권6호
• /
• pp.745-754
• /
• 2011

To improve the textural properties of gluten free rice flour based products, the physicochemical and pasting properties of extruded non-waxy rice flours using extruder were investigated. The high yielding Tongil type rice variety, Hanarum was used. Hanarum rice flour was prepared by dry milling from soaked and dried rice grain. The operation conditions of twin screw extruder were 250 rpm of screw speed, $160^{\circ}C$ of barrel temperature, and 24, 27, and 30% of moisture content. Hanarum extruded rice flour (HERF) were lower in crude lipid and ash contents, but higher in crude protein than Hanarum rice flour (HRF). The color values of HERF showed significantly different (p<0.05) with different moisture contents. Water binding capacities, apparent amylose contents, and damaged starch of HERF were higher than those of HRF. Moisture contents affected water binding capacities of HERF. Solubility increased with increasing heating temperature and solubilities of HERF differed significantly (p<0.05). X-ray crystallinity was changed after extrusion cooking and that of HERF showed sharp peaks at $2{\theta}=18-20^{\circ}$. The pasting viscosities of HERF kept lower values (~ 10 RVU) constantly.

• Fisheries and Aquatic Sciences
• /
• 제2권2호
• /
• pp.149-154
• /
• 1999

Response Surface Methodology was applied for optimizing the processing parameters of ultrasound treatment in order to produce low-molecular alginate. The use of ultrasound significantly reduced viscosity of alginate solutions. Suggested parameters of ultrasound treatment for maximum reduction of alginate molecular weight were: specific intensity, 115.81 $W/cm^2$ at 20kHz frequency; treatment time, 35.55 min; temperature, $20.08^{\circ}C$; alginate concentration, $2.5\%$. Low-molecular alginate obtained by ultrasound had two peaks on Sepharose CL-6B gel filtration. The viscosities of control, fraction I, and fraction II at $0.1\%$ concentration and $25^{\circ}C$ were 3.07, 1.23, and 0.82cps, respectively. Molecular weights of control, fraction I, and fraction II alginates were 336,500, 70,400, and 52,800 daltons, and their solubilities were 3, 6, and $14\%$, respectively. The lower molecular weight of alginate, the lower the alcohol precipitation and the higher $Ca^{2+}$ ion binding capacities. Heavy metal ion binding capacities of alginates were high in the following order of Pb, Cd, Zn, and Co.

• 대한핵의학회지
• /
• 제1권1호
• /
• pp.21-35
• /
• 1967

Anemia is a usual finding in advanced malignant diseases. Various mechanisms were reported as to be involved in the development of anemia of this kind, and they may differ in individual cases. Tumor anemias may be due, for instance, to chronic blood loss, shortened life span of the red blood cells or a decreased hemopoiesis in the bone marrow. The serum iron and copper levels, total iron binding capacity, apparent half survival of $^{51}Cr$-labelled red blood cells were measured along with the ferrokinetic studies using $^{59}Fe$ in 64 patients with various malignant tumors. Following were the results: 1. The serum iron levels were decreased in all cases. There existed no correlation between the serum iron levels and the severity of the diseases. 2. The serum copper levels were increased, particularly in lung cancer, rectal cancer, hepatoma and various sarcomas. There was also no correlation between the serum copper levels and the severity of the diseases. 3. The serum iron levels appeared to be inversely proportional to the serum copper levels. 4. The total iron binding capacities were within normal limits in all cases. There were also no correlations between the total iron binding capacities, serum iron levels and the severity of the diseases. 5. The patients could be classified according to the ferrokinetic patterns, namely, that of iron deficiency anemia in 10 cases, that of refractory anemia in 6 cases, normal in 1 case and that of atypical abnormal in 9 cases. 6. Apparent half survival time of $^{51}Cr$-labelled red blood cells were definitely shortened in half of the cases.