• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.124.2-124.2
• /
• 2011

현재 박막형 태양전지는 실리콘계가 주류를 이루고 있으며, 유리기판 또는 유연성 기판에 비정질 실리콘 박막을 형성시킨 태양전지와 실리콘 기판 양면에 태양전지를 형성하는 방법 등 효율을 극대화시킨 이종접합 태양전지 등이 연구되고 있다. 예컨대 밴드갭이 서로 다른 박막들 간의 이종접합을 이용한 tandem 구조 및 triple 구조의 Si 박막 태양전지의 경우 13%대 변환효율을 나타낸다고 보고된 바 있다. 본 연구에서는 비정질 Si 박막 태양전지 내 흡수층의 효율을 최대화하기 위하여 AZO/Ag 이중구조 박막의 특성에 관한 연구를 수행하고자 한다. combinatorial sputtering system을 이용하여 AZO/Ag 이중구조 박막을 제작하였으며 타겟으로는 4-inch target(Ag, 2wt% Al2O3 doped ZnO)이 사용되었다. 유리기판 상에 combinatorial sputter system으로 상온에서 제작된 Ag 박막의 두께는 25nm로 성장시켰으며 연속공정으로 AZO 박막을 제작하였고, AZO 박막은 100~500nm의 두께경사를 나타내었다. 이 때 유리기판상에 성장된 Ag/AZO 박막의 면저항은 약 $2{\Omega}/{\Box}$ 값을 나타내었다. 본 발표에서는 AZO/Ag 이중 구조 박막의 우수한 전기적 특성을 기반으로 표면 거칠기 및 반사도 특성 등에 관하여 추가적으로 토론한다.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.3
• /
• pp.161-170
• /
• 1991

The storage stabilities of immunoliposomes incorporated with variable amounts of ganglioside $G_{M1}$ were investigated as a function of time. temperature. and composition by observing absorbance of visible light and calcein release. In the column chromatographe, the layer of unsaturated PE(dioleoylphosphatidylethanolamine : DOPE). unable to form stable liposomes at physiological temperature and pH, were formed when palmitoyl-immunoglobulin G(IgG) $(2.5{\times}10^{-4}\;mol/DOPE\;mol)$ added. The incorporation of ganglioside $G_{M1}$ into immunoliposome. enhanced the stabilities of bilayers during the extended period of storage. The turbidities of immunoliposomes coated with ganglioside $G_{M1}$ exhibited the maximum near 20 mol% $G_{M1}/DOPE$ mol. probably because of the disturbance of the bilayer characteristics, i.e., layer transition or reorientation of interaction sites. At low temperature. the higher stability was achieved than at elevated temperatures. After one week of storage. the redispersed liposomal solutions at lower temperatures maintained the original elution patterns in chromatography but broader distribution at elevated temperatures. During the storage, it is suggested the aggregation is the more dominant phenomena for liposomes kept at $5^{\circ}C$ than the fusion. while he fusion is at elevated temperatures.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1809-1816
• /
• 2014

This study demonstrates gel-to-fluid transition temperatures of polydiacetylene bilayer vesicles could play important roles in their colorimetric transition temperatures. We prepared five types of polydiaceylene vesicles with 10,12-pentacosadiynoic acid (PCDA) and cholesterol (0-40 mol % of total content). From temperature-dependent observations of the optical signals (colors and UV-vis spectra), the blue-to-red colorimetric transition temperatures of polydiacetylene vesicles were decreased with the cholesterol contents. A further study with microcalorimetry and dynamic light scattering revealed that the polydiacetylene vesicles first underwent gel-to-fluid transitions, which were followed by event(s) responsible for the colorimetric transitions. Energies required for each event were quantified from analysis of the peaks in the microcalorimetry thermograms. The inclusion of cholesterol in the vesicles decreased both the gel-to-fluid and the colorimetric transition temperatures, suggesting that the colorimetric transition of the polydiacetylene vesicles was mediated by the former event although the event was not the direct reason for the color change.

• KSBB Journal
• /
• v.32 no.2
• /
• pp.160-167
• /
• 2017

Coating of individual cells with organic or inorganic materials has drawn a great deal of attention, because it provides the cells with physicochemical durability, which would contribute to the development of bioreactors, biosensor, and lab-on-a-chip, as well as to the fundamental studies in single cell-based biology. Although many strategies have been developed for coating of microbial cells, limited methods are available to coat mammalian cells because most mammalian cells do not have a robust membrane or exoskeleton. Instead, they are enclosed in a lipid bilayer, which is fluidic and vulnerable to changes in its environments. It is more difficult to treat mammalian cells in vitro than microbial cells because the surfaces of mammalian cells are not protected or reinforced by a tough coat. In this work, we report a cytocompatible and degradable nanocoat for mammalian cells. Three types of mammalian cells (HeLa cells, NIH 3T3 fibroblasts, and Jurkat T cells) were individually coated within metal-polyphenol. To maintain the viability of the mammalian cells, we performed the whole processes under strictly physiological culture conditions, and carefully selected nontoxic materials.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.134-142
• /
• 1996

The epi-CoSi$_{2}$ layer was formed by alloying a Co(120$\AA$)/Ti(50$\AA$) bilayer. In addition, the ultra shallow p$^{+}$n junction of which depth is about not more than 40nm at the background concentration, 10$^{18}$atoms/cm$^{3}$ could be formed by annealing (RTA-II) the ion implanted epi-silicide. When the temperature of RTA-I is as low as possible and that of RTA-II is moderate, the p$^{+}$n junction that has low leakage current and stable epi-silicide layer could be obtained. That is, when th econdition of TRA-I was 900$^{\circ}C$/20sec and that of RTA-II was 900$^{\circ}C$/10sec, the reverse leakage current was as high as 11.3$\mu$A/cm$^{2}$ at -5V. The surface of CoSi$_{2}$ appeared considerably rough. However, when the conditon of RTA-I was 800$^{\circ}C$/20sec or 700$^{\circ}C$/20sec, the leakage currents were as low as 8.3nA/cm$^{2}$ and 9.3nA/cm$^{2}$, respectively and also the surfaces appeared very uniform.

• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.100-106
• /
• 1994

A bilayer film consisting of a layer of a-Se$_{75}$ Ge$_{25}$ with a surface layer of silver -100[.angs.] thick and a monolayer film of a-Se$_{75}$ Ge$_{25}$ are irradiated with 9[keV] Ga$^{+}$ ion beam. The Ga$^{+}$ ion (10$^{16}$ [ions/cm$^{2}$] exposed a-Se$_{75}$ Ge$_{25}$ and Ag/a-Se$_{75}$ Ge$_{25}$ thin films show an increase in optical absorption, and the absorption edge on irradiation with shifts toward longer wavelength. The shift toward longer wavelength called a "darkening effect" is observed also in film exposure to optical radiation(4.5*10$^{20}$ [photons/cm$^{2}$]). The 0.3[eV] edge shift for ion irradiation films is about twice to that obtained on irradiation with photons. These large changes are primarily due to structural changes, which lead to high etch selectivity and high sensitivity.

• Journal of Photoscience
• /
• v.8 no.3_4
• /
• pp.87-92
• /
• 2001

Intramolecular excimer formation of 1,3-di(1-pyrenyl)propane (Py-3-Py) and fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) were used to investigate the effects of parathyroid hormone (PTH) on the bulk bilayer fluidity of the plasma membrane vesicles isolated from cultured osteoblasts (OB-PMV). In a dose-dependent manner, rat PTH-(1-34) [rPTH-(1-34)] increased the excimer to monomer fluorescence intensity ratio (I'/I) of Py-3-Py and decreased the anisotropy (r) of DPH in OB-PMV. This indicates that PTH increased both the lateral and rotational diffusion of the probes in OB-PMY. Selective quenching of DPH fluorescence by trinitrophenyl groups was utilized to examine the transbilayer fluidity asymmetry of OB-PMV. The anisotropy, limiting anisotropy, and order parameter of DPH in the inner monolayer were 0.024, 0.032, and 0.062 greater than calculated for the outer monolayer of OB-PMY. Selective quenching of DPH fluorescence by trinitrophenyl groups was also utilized to examine the transbilayer effects of PTH on the fluidity of OB-PMV. rPTH-(1-34) had a greater fluidizing effect on the outer monolayer as compared to the inner monolayer of OB-PMV. Thus, it has been proven that PTH exhibits a selective rather than nonselective fluidizing effect within transbilayer domains of OB-PMV.

• Korean Journal of Poultry Science
• /
• v.32 no.2
• /
• pp.97-100
• /
• 2005

Mast cells have been studied extensively in various animals including rats and mice, whereas little is known the morphological data about pheasant mast cells. Here, morphological features of Korean pheasant mast cells are described in this study using light and electron microscopes. For light microscopy, mast cells had many metachromatic granules stained with toluidine blue in the cytoplasm. The fixation with $10\%$ neutral buffered formalin blocked staining of most mast cells but a modified Karnovsky solution proved to be a good fixative. In Korean pheasants, toluidine blue stained more mast cells than did alcian blue. For electron microscopy, the mast cells of the Korean pheasant were round, oval, spindle-like and irregular form and occasionally had a few short cytoplasmic processes. These cells had membrane-bounded granules and poorly developed organells. Some granules in the cytoplasm of the mast cells had bilayer membrane. Most granules were round shape and the membrane of several granules was concave or convex. The granules were composed of three parts, homogenous, particulate and reticular pattern.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.612-616
• /
• 1991

Metachromatic behavior of methylene blue (MB) in solutions of aqueous sodium dodecyl sulfate (SDS), chondroitin sulfate and L-${\alpha}$-lecithin vesicle at $18~52^{\circ}$C has been studied by absorption spectroscopy. MB was clustered in the matrix of the vesicle with high concentration of L-${\alpha}$-lecithin. The metachromasy of MB was found to be independent of phase transition temperature of vesicles. These results suggest that the dyes were aggregated on the hydrophilic surfaces of vesicle. In the vesicular system, the metachromatic effect of MB was dramatically decreased in the presence of hexadecyltrimethylammonium bromide (CTAB) than SDS. It is estimated that the intercalation site of these surfactants on vesicle surfaces was different, that is, the intercalation of CTAB was more effective than that of SDS.

• Macromolecular Research
• /
• v.14 no.6
• /
• pp.610-616
• /
• 2006

An azoinitiator linked to an epoxy oligomer, which could easily diffuse into the organoclay gallery and swell it, was used as an initiator to enhance the delamination of an organoclay, Cloisite 25A, in a matrix of styrenic polymers, poly(styrene-co-acrylonitrile) and polystyrene, during the preparation of a nanocomposite via an in-situ polymerization method. X-ray diffraction results and transmission electron microscopic observation of the morphology showed that the epoxy segment enhanced not only the delamination but also the extrication of ammonium cations from the organoclay gallery into the polymer matrix. The latter phenomenon induced the structural change of the alkyl group of ammonium cations in the gallery from a bilayer to monolayer structure, and also decreased the glass-rubber transition temperature as measured by a differential scanning calorimeter and dynamic mechanical analyzer.