• 한국수자원학회논문집
• /
• 제53권8호
• /
• pp.617-626
• /
• 2020

본 연구에서는 TELEMAC-2D를 이용하여 개수로 분류부에서 분류각과 분류유량비 변화에 따른 유속분포, 흐름분리구역의 크기, 분류각과 유량비 변화의 상관관계를 파악하였다. 상·하류단 경계조건의 변화 없이 분류각만 90°에서 45°로 감소하면 주흐름에서 분리되어 분류수로로 유입되는 흐름의 곡률반경이 증가하고 급격한 흐름방향의 전환에 의한 에너지손실은 감소하며, 주수로와 분류수로 하류방향으로 흐르는 흐름의 관성력과 하류단 경계조건에 의한 압력경사의 영향으로 분류수로에 유입되는 분류유량비가 0.523에서 0.785로 약 1.5배 증가하였다. 분류부 상류 유입흐름의 프루우드 수가 F₁ = 0.45~0.74인 흐름에서 분류각을 90°에서 45°로 15° 간격으로 감소할 때마다 분류유량비는 각각 6~10%, 17~30%, 32~54%로 비선형적으로 증가하며, F₁가 최대 0.74인 흐름에서 분류유량비 증가율이 31.1%로 최소값을 나타내고 F₁ = 0.58 일 때 분류유량비가 0.7 이하이면서 최대 분류유량비 증가율 53.5%을 나타내며, F₁이 0.58보다 감소할수록 분류유량비가 0.7을 초과하면서 그 증가율도 함께 감소하게 된다. F₁ > 0.4인 흐름은 F₁ < 0.4의 흐름보다 무차원 흐름분리구역의 폭(S_W/B) 변화율은 약 2.56배 높으며 무차원 흐름분리구역 길이(S_L/B) 변화율은 약 5.5배 높게 나타난다.

• 한국수자원학회논문집
• /
• 제52권1호
• /
• pp.1-10
• /
• 2019

본 연구에서는 분류부 흐름에 대한 TELEMAC-2D 2차원 수치모형의 적용성을 검증하고, 수치실험을 통한 분류유량비 계산식의 비교분석, 분류유량비 변화에 따른 분류부 흐름특성 변화를 분석하였다. 본 수치모형은 분류부 수심평균 유속분포와 수위에 대해 실내실험결과와 잘 일치하는 결과를 나타냈다. 주수로의 하류방향 관성력과 모멘트가 감소하면 분류유량비가 증가하게 되고, 분류수로에서 상대적인 고유속 분포구간은 넓어지며, 분류수로 주흐름의 역방향 유속은 감소한다. 분류유량비가 증가할수록 분류수로 내 흐름분리구역 규모는 감소하며, 흐름분리구역 규모 산정시 유선분포 작도뿐만 아니라 종방향 프루우드 수가 $Fr{\approx}0$이 되는 지점 확인으로 더 명확하게 산정할 수 있다.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.270-278
• /
• 1999

This paper describes the collapse characteristics of the rectangular tube under eccentric compressive load. Overall buckling stress and bifurcation criterion (slenderness ration)are investigated. modified secant formula(MSF) is proposed to decide overall buckling stress. The bifurcation criterion which can distinguish between the local and overall buckling mode shapes is suggest by equating the local and overall buckling stresses. Additionally the effect of initial imperfection on bifurcation criterion is investigated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.33-38
• /
• 2001

Bifurcation of unstable symmetric flow patterns to stable asymmetric ones in laminar sudden-expansion flow has been numerically investigated. Computations were carried out for an expansion ratio of 3 and over a range of the flow Reynolds numbers by using numerical methods of second-order time accuracy and a fractional-step method that guarantees divergence-free flowfields at all times. The critical Reynolds number above which bifurcation of pitchfork type to asymmetric flow pattern takes place is lower in a flow with a higher expansion ratio, in agreement with the previously reported results. The bifurcation diagrams show that the bifurcation takes place at a Reynolds number, $Re_c = 86.3$, higher than the value that has been reported. The lower critical Reynolds number may be due to deficiencies in their computations which employed SIMPLE-type relaxation methods rather than the initial-value approach of the present study. Characteristics of the flow development during the transition to asymmetric stable flow have been investigated by using spectral analysis of the velocity signals obtained by the simulations.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.895-904
• /
• 1998

This paper presents the results of experimental investigation of the buckling behavior of thin-walled box-section column. The experiments for finding the buckling stress and bifurcation slenderness ratio are performed by the method from AISC. The sets of boundary conditions are both end simply supported, one end simply supported and the other end clamped, and both ends clamped. The types of specimens are clssified by thickness to width ratio. The experiments for the thin-walled rectangular tubes are closely concurrent with the theoretical values of overall buckling load and bifurcation slenderness ratio that are suggested by the part (I) of this paper.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.174-182
• /
• 2007

In this paper, we study the influence of infection ratio on gradual reduction of drug dose for the five state HIV infection model that explicitly includes the population of the virus. We first compute all equilibrium points of the model and investigate the stabilities of them. As a result, a bifurcation diagram is obtained which shows a change in the equilibrium points, or in their stability properties, as the drug effect $\eta$ is varied from 0 to 1(alternatively, drug dose is changed from 1 to 0). Based on the bifurcation diagram, we show that the gradual reduction of drug dose can be applied for the treatment of AIDS patients. Moreover, we analyze the influence of the variation of infection ratio on the gradual reduction treatment. Computer simulation results are also presented to validate the proposed results.

• 한국전산유체공학회지
• /
• 제16권4호
• /
• pp.64-71
• /
• 2011

Cerebral aneurysm mostly occurs at a bifurcation of the circle of Willis. When the cerebral aneurysm is ruptured, a disease like subarachnoid hemorrhage and stroke is caused and this can be even deadly for patients. Generally it is known that causes of the intracranial aneurysm are a congenital deformity of the artery and pressure or shear stress from the blood flow. A blood flow pattern and the geometry of the blood vessel are important factors for the aneurysm formation. Research for several hemodynamic indices has been performed and these indices can be used for the prediction of aneurysm initiation and rupture. Therefore, the numerical analysis was performed for hemodynamic characteristics of the blood flow through the cerebral artery applying the various bifurcation angle and flow rate ratio. We analyze the flow characteristics using indices from the results of the numerical simulation. In addition, to investigate the flow pattern in the aneurysm according to the bifurcation angle and the flow rate ratio, we performed the numerical simulation on the supposition that the aneurysm occurs.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.161-168
• /
• 2011

Cerebral aneurysm mostly occurs at a bifurcation of the circle of Willis. When the cerebral aneurysm is ruptured a disease like subarachnoid hemorrhage and stroke is caused and this can be even deadly for patients. Generally it is known that causes of the intracranial aneurysm are a congenital deformity of the artery and pressure or shear stress from the blood flow. A blood flow pattern and the geometry of the blood vessel are important factors for the aneurysm formation. Research for several hemodynamic indices has been performed and these indices can be used for the prediction of aneurysm initiation and rupture. Therefore, the numerical analysis was performed for hemodynamic characteristics of the blood flow through the cerebral artery applying the various bifurcation angle and flow rate ratio. We analyze the flow characteristics using indices from the results of the numerical simulation. In addition, to investigate the flow pattern in the aneurysm according to the bifurcation angle and the flow rate ratio, we performed the numerical simulation on the supposition that the aneurysm occurs.

• East Asian mathematical journal
• /
• 제31권5호
• /
• pp.743-751
• /
• 2015

In this paper, we consider a discrete ratio-dependent predator-prey system with harvesting effect. In order to investigate dynamical behaviors of this system, first we find out all fixed points of the system and then classify their stabilities by using their Jacobian matrices and local stability method. Next, we display some numerical examples to substantiate theoretical results and finally, we show numerically, by means of a bifurcation diagram, that various dynamical behaviors including cycles, periodic doubling bifurcation and chaotic bands can be existed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.741-746
• /
• 2003

The main objective of present study is to obtain information for flow characteristics, such as velocity and wall shear stress, of bifurcation in blood vessel. Branch flows for Newtonian fluids are simulated by using Fluent V.6.0. The numerical simulations are carried out for five cases divided by different values of bifurcation angle and area ratio. As a result of simulation, high wall shear stress is appeared at the bifurcated region. As increasing bifurcation angle, pressure drop is increasing. In addition, as the area is decreasing, pressure drop and wall shear stress is increasing.