• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.9
• /
• pp.983-989
• /
• 2014

In this paper, a new active noise control method was proposed to decrease a weight of car, and to increase a fuel efficiency and to provide passengers' comfort and calmness, instead of a passive noise control method such as sound absorbing and insulating materials. The proposed method is an enhanced active noise controller operating by a bidirectional control algorithm. The algorithm is simple to implement and available to analyze mathematically with nearly equivalent complexity of computation. Through simulations for engine noises of a car, the proposed controller was verified that its performances of time and frequency domain were superior to those of both feedforward and feedback controllers, and it had better capability of controlling the noises when the impulsive disturbance was flow in and the response of secondary path was varied.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1625-1636
• /
• 2017

A power electronic transformer (PET) based on the cascaded H-bridge (CHB) and the isolated bidirectional DC/DC converter (IBDC) is capable of accommodating a large scale battery energy storage system (BESS) in the medium-voltage grid, and is referred to as a power electronic transformer based battery energy storage system (PET-BESS). This paper investigates the PET-BESS and proposes a coordinative control strategy for it. In the proposed method, the CHB controls the power flow and the battery state-of-charge (SOC) balancing, while the IBDC maintains the dc-link voltages with feedforward implementation of the power reference and the switch status of the CHB. State-feedback and linear quadratic Riccati (LQR) methods have been adopted in the CHB to control the grid current, active power and reactive power. A hybrid PWM modulating method is utilized to achieve SOC balancing, where battery SOC sorting is involved. The feedforward path of the power reference and the CHB switch status substantially reduces the dc-link voltage fluctuations under dynamic power variations. The effectiveness of the proposed control has been verified both by simulation and experimental results. The performance of the PET-BESS under bidirectional power flow has been improved, and the battery SOC values have been adjusted to converge.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1B
• /
• pp.1-10
• /
• 2007

We propose a new approach to accommodate bidirectional asymmetric traffic demands as well as unexpected dynamic internet traffic variation in the WDM mesh network by using optical networking technologies. In the proposed scheme, an intermediate node determines the optical path based on the switching statistics of IP router of the node which characterizes the Internet traffic variation, which in effect provides a dynamic and distributed traffic control over the network. It is expected to reduce the efficiency deterioration of RWA(Routing and Wavelength Assignment) due to the real-time variation of Internet traffic so that expandability and flexibility of the network can be enhanced. In this paper, we describe a methodology for traffic behavior analysis at a node, and the decision policy of the establishment/release of optical path. In addition, we evaluate the performance of the proposed scheme through the computer simulations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.526-528
• /
• 2005

파장 분할 다중화 방식 (WDM)의 광통신은 중앙 기지국에서 각 가입자에게 서로 다른 파장을 할당하여 동시에 데이터를 전송하는 방식으로서 각 가입자는 할당된 파장을 이용하여 항상 데이터를 송/수신할 수 있고 각 가입자에게 대용량의 데이터를 전송할 수 있을 뿐만 아니라 통신의 보안성이 뛰어나고 성능 향상이 용이하다 따라서 상, 하향(양방향, bidirectional) 3 파장 WDM-필터 소자(Flat band-path filter)는 광 가입자망 구축에서 통신 방송을 융합한 양방향 고화질 멀티미디어 서비스 사업에 반드시 필요로 하는 원천 부품이다. 본 연구에서는 1차원 광자결정을 이용한 저 손실 양방향 3 파장 WDM-필터를 얻을 수 있는 이론적 모델을 설계하고 그에 따라 2-cavity $Ta_2O_5/SiO_2$ 1차원 광자결정체를 제작하고 그 특성을 고찰 하였다. 파장에 따른 투과도 측정 결과 1550nm파장에서 투과되고 1310nm 및 1490nm파장에 대한 차단이 이론값과 일치하였다. 1550nm 파장 대에서 손실이 매우 낮은 flat-투과 밴드가 생성되었다. 특히 입사각도에 따라 flat-band 중심 파장의 변화를 이용하므로 새로운 개념의 WDM 소자로의 응용이 가능하다.

• ETRI Journal
• /
• v.9 no.1
• /
• pp.84-96
• /
• 1987

The equality relation is very important in mechanical theorem proving procedures. A proposed inference rule called RHU-resolution is intended to extend the hyperparamodulation[23, 9] by introducing a bidirectional proof search that simultaneously employs a forward reasoning and a backward reasoning, and generalize it by incorporating beneflts of extended hyper steps with a preprocessing process, that includes a subsumption check in an equality graph and a high level planning. The forward reasoning in RHU-resolution may replace the role of the function substitution link.[9] That is, RHU-deduction without the function substitution link gets a proof. In order to control explosive generation of positive equalities by the forward reasoning, we haue put some restrictions on input clauses and k-pd links, and also have included a control strategy for a positive-positive linkage, like the set-of-support concept, A linking path between two end terms can be found by simple checking of linked unifiability using the concept of a linked unification. We tried to prevent redundant resolvents from generating by preprocessing using a subsumption check in the subsumption based eauality graph(SPD-Graph)so that the search space for possible RHU-resolution may be reduced.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.3
• /
• pp.213-223
• /
• 2004

We consider the traffic grooming problem for the design of SONET/WDM(Synchronous Optical NETwork/Wavelength Division Multiplexing) ring networks. Given a physical network with ring topology and a set of traffic demands between pairs of nodes, we are to obtain a stack of rings with the objective of minimizing the number of ADMs installed at the nodes. This problem arises when a single ring capacity is not large enough to accommodate all the demands. As a solution method, an efficient algorithm based on the branch-and-price approach has been reported in the literature for the problem in which only unidirecional path switched ring (UPSR) was considered. In this study, we suggest integer programming models and the algorithms based on the same approach as the above one, considering two-fiber bidirectional line switched ring(BLSR/2), and BLSR/4 additionally. Using the results, we compare the number of required ADMs for all types of the ring architecture.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.799-804
• /
• 2016

Broadband powerline communication (BPLC) uses distribution lines as a medium for achieving effective bidirectional data communication along with electric current flow. As the material characteristics of power lines are not good at the communication channel, the development of power line communication (PLC) systems for internet, voice, and data services requires measurement-based models of the transfer characteristics of the network suitable for performance analysis by simulation. In this paper, an analytic model describing a complex transfer function is presented to obtain the attenuation and path parameters for a multipath power line model. The calculated results demonstrated frequency-selective fading in multipath channels and signal attenuation with frequency, and were in good agreement with the experimental results. Inductive coupling units are used as couplers for coupling the signal to the power line to avoid physical connections to the distribution line. The inductance of the ferrite core, which depends on the frequency, determines the cut-off frequency of the inductive coupler. Coupling loss can be minimized by increasing the number of windings around the coupler. Coupling efficiency was improved by more than 6 dB with three windings compared to the results obtained with one winding.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1199-1208
• /
• 2013

Fibroblastic reticular cells (FRCs) form the structural backbone of the T zone provide a guidance path for immigrating T cells in the lymph node (LN). FRCs may contribute directly to developing T-cell biology in the LN and allow analyses of fundamental aspects of FRC biology related to T cells. FRCs inhibited T-cell apoptosis, and FRC culture supernatants strongly induced the expression of Bcl-xL in T cells against doxorubicin. Coculture of FRC and T cells resulted in rearrangements of the actin cytoskeleton, as well as global changes in the morphology of the FRCs. In addition, when cocultured, the T cells adhered to the FRC monolayer, and the membrane intercellular adhesion molecule (ICAM)-1 was slightly increased by day-dependent manner. In contrast, the expression of soluble ICAM-1 was dramatically increased in a day-dependent manner. Several chemokines, such as CCL5, CXCL1, CXCL5, CXCL16, CCL8, CXCL13, and ICAM-1, and MMPs were expressed in FRCs sensed by tumor necrosis factor (TNF) families. Nuclear factor kappa B ($NF{\kappa}B$)-RelA of the $NF{\kappa}B$ canonical pathway was translocated into FRC nuclear by $TNF{\alpha}$. In contrast, p52 proteolyzed from p100, a counterpart of RelB of the noncanonical $NF{\kappa}B$ pathway, accumulated in the peripheral FRC nucleus by agonistic anti-$LT{\beta}R$ antibody. In summary, we propose a model in which FRCs engage in bidirectional crosstalk to increase the efficiency of T-cell biology. This cooperative feedback loop may help to maintain tissue integrity and function during immune responses.

• Journal of Life Science
• /
• v.23 no.11
• /
• pp.1409-1414
• /
• 2013

Lymph node (LN) is the sites where mature lymphocytes become stimulated to respond to invading pathogens in the body. Lymphocytes screen the surfaces of pathogen-carrying antigen-presenting cells for cognate antigens, while moving along stromal structural back bone. Fibroblastic reticular cells (FRC) is stromal cell forming the 3 dimensional structure networks of the T cell rich zones in LN, and provide a guidance path for immigrating T lymphocytes. In these cooperative environments, the cell to cell bidirectional interactions between FRC and T cells in LN are therefore essential to the normal functioning of these tissues. Not only do FRCs physically construct LN architecture but they are essential for regulating T cell biology within these domains. FRC interact closely with T lymphocytes, is providing scaffolds, secreting soluble factors including cytokine in which FRCs influence T cell immune response. More recently, FRC have been found to induce peripheral T cell tolerance and regulate the extent to which newly activated T cells proliferate within LN. Thus, FRC-T cell crosstalk has important consequences for regulating immune cell function within LN. In addition, FRC have profound effects on innate immune response by secreting anti-microbial peptides and complement, etc in the inflammatory milieu. In summary, we propose a model in which FRC engage in a bidirectional touch to increase the T cell biological efficiency between FRC and T cells. This collaborative feedback loop may help to maintain tissue function during inflammation response.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.59-66
• /
• 2001

In this paper, we propose a dynamic source routing protocol supporting asymmetric paths for mobile Ad Hoc networks that contain unidirectional links. At present, the existing dynamic source routing protocol supports only symmetric paths that consist of bidirectional links for routing. However, in fact, there can exist unidirectional links due to asymmetric property of mobile terminals or current wireless environment. Thus, we implement a mobile Ad Hoc routing protocol supporting unidirectional links, which is fit for more general wireless environment. Especially, the proposed protocol uses an improved multipath maintenance method in order to perform rapid route reconfiguration when route error due to mobility is detected. For performance evaluation, we consider the following factors: average route discovery time and average data reception rate. In order to obtain the factors of the performance evaluation, we did simulation for 900 seconds in the step of 100 seconds with the following scenarios: usage of route cache in intermediate nodes on route path, and different mobility/connection patterns.