• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.9
• /
• pp.718-722
• /
• 2011

In this work, we investigated to the etching characteristics of the TiN thin film in He/$BCl_3/Cl_2$ plasma. The etch rate was measured by the gas mixing ratio, the RF power, the DC bias voltage and the process pressure. The maximum etch rate in He/$BCl_3/Cl_2$ plasma was 59 nm/min. The etch rate increased as the RF power and the DC-bias voltage was increased. The chemical reaction on the surface of the etched the TiN thin films was investigated with X-ray photoelectron spectroscopy (XPS). The intensity of Ti 2p and N 1s peaks are varied during etching process. A new peak was appeared in He/$BCl_3/Cl_2$ plasma. The new peak was revealed Ti-$Cl_x$ by Cl 2p peak of XPS wild scan spectra analysis.

• Current Optics and Photonics
• /
• v.3 no.2
• /
• pp.164-171
• /
• 2019

Photoluminescence (PL) properties of GaN-based light-emitting diodes (LEDs) were analyzed to study the effects of carrier leakage on the luminescence properties at room temperature. The electrical leakage and PL properties were compared for LEDs showing leakages at forward bias and an LED with an intentional leakage path formed by connecting a parallel resistance of various values. The leakages at the forward bias, which could be observed from the current-voltage characteristics, resulted in an increase in the excitation laser power density for the maximum PL efficiency (ratio of PL intensity to excitation power) as well as a reduction in the PL intensity. The effect of carrier leakages on PL properties was similar to the change in PL properties owing to a reduction of the photovoltage by a reverse current since the direction of the carrier movement under photoexcitation is identical to that of the reverse current. Valid relations between PL properties and electrical properties were observed as the PL properties deteriorated with an increase in the carrier leakage. The results imply that the PL properties of LED chips can be an indicator of the electrical properties of LEDs.

• Journal of the Korean earth science society
• /
• v.36 no.4
• /
• pp.330-340
• /
• 2015

For this study, we developed an algorithm to estimate the total amount of clouds using sky image data from the Skyviewer equipped with CCD camera. Total cloud amount is estimated by removing mask areas of RGB (Red Green Blue) images, classifying images according to frequency distribution of GBR (Green Blue Ratio), and extracting cloud pixels from them by deciding RBR (Red Blue Ratio) threshold. Total cloud amount is also estimated by validity checks after removing sunlight area from those classified cloud pixels. In order to verify the accuracy of the algorithm that estimates total cloud amount, the research analyzed Bias, RMSE, and correlation coefficient compared to records of total cloud amount earned by human observation from the Gangwon Regional Meteorological Administration, which is in the closest vicinity of the observation site. The cases are selected four daily data from 0800 LST to 1700 LST for each season. The results of analysis showed that the Bias in total cloud amount estimated by the Skyviewer was an average of -0.8 tenth, and the RMSE was 1.6 tenths, indicating the difference in total cloud amount within 2 tenths. Also, correlation coefficient was very high, marking an average of over 0.91 in all cases, despite the distance between the two observation sites (about 4 km).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.421-427
• /
• 2009

We successfully fabricated 4.7-inch organic thin film transistors array with $640{\times}480$ pixels on flexible substrate. All the processes were done by photolithography, spin coating and ink-jet printing. The OTFT-Electrophoretic (EP) pixel structure, based on a top gate OTFT, was fabricated. The mobility, ON/OFF ratio, subthreshold swing and threshold voltage of OTFT on flexible substrate are: 0.01 ^2/V-s, 1.3 V/dec, 10E5 and -3.5 V. After laminated the EP media on OTFT array, a panel of 4.7-inch $640{\times}480$ OTFT-EPD was fabricated. All of process temperature in OTFT-EPD is lower than $150^{\circ}C$. The pixel size in our panel is $150{\mu}m{\times}150{\mu}m$, and the aperture ratio is 50 %. The OTFT channel length and width is 20 um and 200um, respectively. We also used OTFT to drive EP media successfully. The operation voltages that are used on the gate bias are -30 V during the row data selection and the gate bias are 0 V during the row data hold time. The data voltages that are used on the source bias are -20 V, 0 V, and 20 V during display media operation.

• Journal of Korean Medicine Rehabilitation
• /
• v.29 no.3
• /
• pp.15-33
• /
• 2019

Objectives The objective of this study is to provide the evidence of the effectivness of herbal medicine for frozen shoulder. Methods 2 Korean medical on-line databases (Oriental Medicine Advanced Searching Integrated System, Korean Traditional Knowledge), and 3 foreign databases (Pubmed, Cochrane library, China National Knowledge Infrastructure) were searched to find articles concerning herbal medicine for frozen shoulder. We selected randomized controlled trials (RCTs). Several repeated articles and those not relevant to the topic were excluded, as well as review articles and commentaries. The methodological quality of RCTs were evaluated using the Cochrane risk of bias tool and meta-analyes were perfomed. Results Total 474 studies were founded and 22 RCTs were selected for systematic review. Efficiency rate was used as the primary evaluation method. Almost studies reported that herbal medicine has significant effect on pain reduction, increasing shoulder function on frozen shoulder. 3 studies comparing herbal medicine and chuna with chuna and 3 studies comparing herbal medicine with ibuprofen were included in the meta-analysis. At herbal medicine and chuna with chuna meta-analysis, it showed positive results of herbal medicine for efficiency rate (risk ratio: 1.18, 95% confidence interval: 1.09-1.27, p<0.0001). At herbal medicine with ibuprofen medta-analysis, it showed positive results of herbal medicine for efficiency rate (risk ratio: 1.15, 95% confidence interval: 1.05-1.27, p=0.003). Conclusions The studies showed that herbal medicine can significantly effective on frozen shoulder. However, the risk of bias in RCTs were evaluated as uncertain. In the future, further well-designed RCTs are needed to prove the effectiveness of herbal medicine for frozen shoulder and reduce the risk of bias.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.119-124
• /
• 2006

The present study evaluated the accuracy of MSD-related work criterion of Korea Ministry of Labor by using ergonomic workload evaluation methods. 1,948 manufacturing works in automobile industry were divided into 1,286 MSD-related risky works and 662 risk-free ones by using RULA, ANSI Z-365 and perceived discomfort evaluation. Then, the two types of works were evaluated by Labor Ministry work criterion to analyze the classification accuracy of the work criterion. The work criterion of Korea Labor Ministry had low hit and false alarm ratio(20 and 11%) and high miss and correct rejection ratio(80 and 89%), and the odd ratios of hit and correct rejection were 0.2 and 8.3, respectively. It can be concluded that the work criterion of Korea Labor Ministry is a conservative evaluation method which tends to evaluate a target work as risk-free.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2285-2290
• /
• 2011

This paper is the research on SMSR yield improvement of the optical transceiver using modulated DFB laser. In general, the wavelength of DFB laser optical transceiver are 1310, 1490 and 1550 nm. Usually SMSR in modulated DFB is difficult to improve as low as 30 dB because of high slop efficiency trade off. In modulation condition, we studied SMSR improvement according to adjust bias current, extinction ratio and optical line terminal receiver sensitivity. As our test results, we can found a method how to improve SMSR for optical transceiver for long distance.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.1
• /
• pp.16-18
• /
• 2012

LED lighting systems that combine lighting capability, emotional and physiological characteristics are required for lighting source and multifunctional applications. In this work, Simulation studies using optical analysis software packages, Light Tools, are presented. This is done to estimate the uniformity ratio of illuminance and photosynthetic photon flux density (PPFD) of the periodic 2D lattice arrangements, such as square, diamond, two-way bias quadrangular, hexagonal, and Kagome lattices, under the same transmissivity, absorptance and reflectivity. It has been found out that the two-dimensional Kagome lattice arrangement exhibited high uniformity ratio of illuminance and PPFD compared to other lattices. Accordingly, these results can be used to guide a design and improve the lighting environment which in turn would maximize the uniform distributions of illuminance.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.2
• /
• pp.59-62
• /
• 2009

In order to check the validation of LC simulation, 0.7 inch LCOS panel in full-HD resolution was fabricated and used for the electro-optical measurement. Compared the measured data with the calculated data, the averaged difference was 1.72% under 0 ~ +6 V bias on pixel electrode. To improve the optical characteristics of full-HD LCOS panel, the planar structure and trench structures (0.1 um, 0.2 um and 0.3 um-in-depth) between adjacent pixels were investigated with LC simulation. The planar structure showed the higher reflectance and faster reflectance-voltage response time than the trench structure. The optical fill factor and contrast ratio of planar structure were also higher than those of trench structures. As compared 1 um-in-depth trench structure resembled to the real structure with the planar structure, the optical fill factor was improved by 1.15% and the contrast ratio was improved by 5.26%. In order to minimize the loss of luminance and contrast ratio, the planar structure need to be applied between adjacent pixels.

• Journal of Venture Innovation
• /
• v.2 no.2
• /
• pp.117-126
• /
• 2019

This study conducted correlation analysis and multiple regression analysis using financial statements, loan structure, ROA and ROA volatility of domestic commercial banks, regional banks and special banks for the past five years (2012 ~ 2016). The result is as follows. First, as a result of correlation analysis, bank's ROA is positively related to household loans and SME loans, but it is negatively correlated with the ratio of loans to large companies, sector bias, and loan loss provision ratio. Second, ROA volatility was negatively related to household loans and SME loans, but it was positively correlated with large corporate loans, sector bias ratio, and loan loss provision ratio. Third, as a result of the regression analysis, the variables that have a statistically significant effect on the ROA volatility of banks were household loans, SME loans, and large enterprise loans. From these empirical results, special banks with high volatility in profits need to diversify loan types and sectors in order to achieve business performance outside of policy finance. and Especially, Suhyup Bank and Nonghyup Bank, which have a large commercial role, have a large size per unit by focusing on short-term profit and Rather than focusing on large companies or large loans that are easy to obtain financial information, it is necessary to focus management capabilities on household loans and SME loans by developing capabilities such as screening techniques.