• 한국결정성장학회지
• /
• 제23권1호
• /
• pp.14-19
• /
• 2013

본 연구팀에서는 층상형 페로브스카이트 구조를 갖는 Ruddlesden-Popper 구조의 $K_2La_2Ti_3O_{10}$의 박리화를 통해 Aurivillius 구조의 $Bi_{4-x}La_xTi_3O_{12}$(x~2) 페로브스카이트 산화물을 성공적으로 합성하였다. 박리화된 란타늄 티타네이트 나노시트는 BiOCl 나노결정구조와 반응시켜 $Bi_{4-x}La_xTi_3O_{12}$(x~2) 결정을 얻어내었다. 박리화된 나노시트 현탁액은 $K_2La_2Ti_3O_{10}$으로부터 수소화된 $H_2La_2Ti_3O_{10}$의 층간에 에틸아민을 삽입시킴으로써 얻어내었다. 투과전자현미경(TEM) 분석을 통해, 란타늄 티타네이트가 에틸아민에 의해 박리화된 것을 확인할 수 있었다. X-선 회절분석(XRD)을 통해, 박리화된 란타늄 티타네이트와 BiOCl의 재적층과정을 거쳐 $700^{\circ}C$ 이상의 열처리 조건에서 $Bi_{4-x}La_xTi_3O_{12}$(x~2)로 형성된 것을 확인할 수 있었다.

• Advances in nano research
• /
• 제12권3호
• /
• pp.337-344
• /
• 2022

In this work, the vibrational frequency of two layered FGM cylindrical shell with and without the effects of internal pressure under ring support are discussed in detailed. The functionally graded materials of a cylindrical shell are designed for specific purpose and studied under various boundary conditions. The Love shell dynamical equations theory is utilized to find the relationship between the curvature displacement and strain displacement. Natural frequency vibrations are analyzed by using volume polynomial for bi-layered FGM shell under ring support both for with and without internal pressures.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.484-489
• /
• 1995

The synthesis of new bismuth-barium containing members of layered cuprates with 2201 type structure was reported. By solution calorimetry the formation enthalpies for Bi2MLaCuO6.5 (M=Ba, Ba0.5Sr0.5, Sr) were obtained. Crucial influence of partial oxygen pressure and size of lanthanoid on stability of layered cuprates was shown. Electronic states of variable valence atoms were studied by voltammetry of solids.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.31-31
• /
• 2005

• 한국재료학회지
• /
• 제13권6호
• /
• pp.360-364
• /
• 2003

$Sr_{l}$ $\pm$x/$Bi_{2}$ $\pm$y/$Ta_2$ $O_{9}$ and $Sr_{l}$ $\pm$$Bi_{x}$ $2\pm$y$Nb_2$$O_{9}$ ceramics were prepared by a solid state reaction method. X-ray diffraction analysis indicated that single-phase of Bi-layered perovskite was obtained. According to Sr/Bi content ratio, Curie temperature( $T_{c}$), electromechanical factor($K_{p}$ ) and mechanical quality factor($Q_{m}$ ) were measured. The Curie temperature of SBN(SBT) rose from $414^{\circ}C$(314$^{\circ}C$) to $494^{\circ}C$(426$^{\circ}C$) when Sr/Bi content ratio was increased. In the case of Sr/Bi content ratio = 0.55/2.3, the maximum value of the mechanical quality factor $Q_{m}$ of SBT and SBN were obtained 3320 and 1010, respectively.

• 열처리공학회지
• /
• 제28권6호
• /
• pp.296-299
• /
• 2015

$In_2O_3/Ti$ bi-layered films were deposited on glass substrate at room temperature with radio frequency (RF) and direct current (DC) magnetron sputtering to consider the effect of Ti buffer layer on the electrical and optical properties. In a comparison of figure of merit, $In_2O_3$ 90 nm/Ti 10 nm thin films show the higher opto-electrical performance of $3.0{\times}10^{-4}{\Omega}^{-1}$ than that of the $In_2O_3$ single layer films ($2.6{\times}10^{-4}{\Omega}^{-1}$). From the observed results, it is supposed that the $In_2O_3\;90nm/TiO_2$ 10 nm bi-layered films may be an alternative candidate for transparent electrode in a transparent thin film transistor device.

• Structural Engineering and Mechanics
• /
• 제77권5호
• /
• pp.571-586
• /
• 2021

The present paper studies the influence of the inhomogeneous initial stresses in the bi-layered hollow cylinder and it is assumed that these stresses are caused by the hydrostatic pressures acting on the interior and outer free surfaces of the cylinder. The study is made by utilizing the version of the three-dimensional linearized theory of elastic waves in bodies with initial stresses for which the initial stress-strain state in bodies is determined within the scope of the classical linear theory of elasticity. For the solution to the corresponding eigenvalue problem, the discrete-analytical method is employed. Numerical results are presented and analyzed for concrete selected pairs of materials. According to these results and their analyses, it is established that, unlike homogeneous initial stresses, the influence of the inhomogeneous initial stresses on the torsional wave dispersion has not only quantitative but also qualitative character. For instance, in particular, it is established that as a result of the initial stresses caused by the hydrostatic pressure acting in the interior free surface of the cylinder, the cut-off frequency appears for the fundamental dispersive mode and the values of this frequency increase with the intensity of this pressure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.231-231
• /
• 2010

Thermoelectric properties of a multi-layered thin film, which was composed with indium selenide and bismuth telluride, were investigated. The structure of the layered thin film is Bi-Te /In-Se/Bi-Te and it was prepared on sapphire substrate by RF magnetron sputter using stoichiometric $Bi_2Te_3$ (99.9%) and $In_2Se_3$(99.99%) target at room temperature. Then, it was annealed at temperature range of 150 - $500^{\circ}C$ in Ar ambient. Structural characterizations were done using X-ray diffraction(XRD, BRUKER, D8, 60kW) and transmission electron microscopy (TEM, FEI, Tecnai, F30 S-Twin), respectively. Cross-section of multi-layer structure was observed by Scanning electron microscopy (SEM). The resistivity and Seebeck coefficient of these samples were also measured by conventional equipment at room temperature. The maximum value of power factor was $1.16\;{\mu}W/k^2m$ at annealing temperature of $400^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.34-36
• /
• 2008

Highly efficient red and green phosphorescent devices comprising a simple bilayer structure are reported. The driving voltage to reach $1000\;cd/m^2$ is 4.5 V in $Bebq_2:\;Ir(piq)_3$ red phosphorescent device. Current and power efficiency values of 9.66 cd/A and 6.90 lm/W in this bi-layered simple structure PHOLEDs are obtained, respectively. While in $Bepp_2:Ir(ppy)_3$ green phosphorescent device, the operating voltage value of 3.3V and current and power efficiencies of 37.89 cd/A and 35.02 lm/W to obtain a luminance of $1000\;cd/m^2$ are noticed, respectively.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 춘계 학술발표강연 및 논문개요집
• /
• pp.106-106
• /
• 2002