• 제목/요약/키워드: beta ray

검색결과 617건 처리시간 0.024초

The Crystal Structure of Tolfenamic Acid $(C_{14}H_{12}ClNO_2)$, an Antiinflammatory Fenamate

  • Kim, Yang-Bae;Chung, Uoo-Tae;Park, Il-Yeong
    • Archives of Pharmacal Research
    • /
    • 제19권2호
    • /
    • pp.160-162
    • /
    • 1996
  • The structural analysis of tolfenamic acid, 2-[(3-chloro-2-methylphenyl)-amino]benzoic acid, was performed by single crystal X-ray diffraction technique. The compound was recrystallized from a mixture of ether and toluene in triclinic, space group $P2_1/c, \;with\; \partial=3.914(1), \; b=22.\; 020(2), \; c=14.271(1)\;{\AA}, \beta.=94.68(1)^{\circ}, $ and Z=4. The calculated density is $1.418 g/cm^3$. The structure was solved by the direct method and refined by full matrix least-squares procedure to the final R value of 0.039 for 1773 independent reflections. In the molecule, carboxyl group at the anthranilic acid is coplanar to the phenyl ring. The dihedral angle between the two aromatic rings of the molecule is $44.2^{\circ}$ The molecules are dirnerized through the intermolecular hydrogen bonds at the carboxyl group in the crystal.

  • PDF

PIB(Particle In Binder) 방법으로 제조된 산화납의 특이상전이에 따른 전기적 특성 평가 (The electrical properties study with specific of phase transition of Lead Monoxide by PIB(Particle In Binder))

  • 김성현;김영빈;정숙희;김민우;오경민;박지군
    • 한국방사선학회논문지
    • /
    • 제2권3호
    • /
    • pp.19-25
    • /
    • 2008
  • 현재 기존의 아날로그 형태의 필름/스크린 방식은 영상 저장 및 전송 등의 문제점이 대두되면서, X선에 반응하여 전하 캐리어를 생성시키는 광도전체 물질을 사용하는 직접 방식의 디지털 방사선 검출기로의 연구가 활발히 이루어지고 있다. 본 논문에서는 광도전체 물질인 Lead Oxide와 기존에 많이 연구가 진행 되었던 Lead(II) Oxide를 PIB(Particle In Binder) 방식으로 각각 제작하여 그 전기적 특성을 비교 평가하고자 하였다. 기존의 논문 중 물질의 입체각에 관한 논문에 따르면 정방계의 물질이 사방정계의 물질보다 좋은 특성을 보인다는 것을 기반으로 하여 PbO가 정방계의 ${\alpha}$-PbO와 사방정계의 ${\beta}$-PbO를 비교하였다. 정방계의 ${\alpha}$-PbO와 ${\beta}$-PbO를 PVB(Poly Vinyl Butyral)를 이용한 바인더를 사용하여 PIB(Particle In Binder) 방법으로 제조된 각 시편의 민감도(X-ray sensitivity), 누설전류(Leakage current) 및 SNR(Signal to Noise Rate)와 같은 전기적 특성을 실험을 통해 확인 비교한 것이다. 그리고 시편의 물리적인 특성을 보기 위한 기본적인 SEM(Scanning Electron Microscope) 사진을 촬영하였다. 본 논문에서는 완벽한 ${\alpha}$-PbO를 제작하지 못하였으므로 차후 물질을 제작하는 것에 대한 연구가 더 필요할 것으로 사료된다.

  • PDF

PM2.5 자동측정장비 비교 및 정도관리 방안 (Comparison of the Real-time Measurements for PM2.5 and Quality Control Method)

  • 박미경;박진수;조미라;이용환;김현재;오준;최진수;안준영;홍유덕
    • 한국대기환경학회지
    • /
    • 제33권6호
    • /
    • pp.616-625
    • /
    • 2017
  • Measurements using five real-time particle samplers were compared to measurements using three NRM (National Reference Method system) filter-based samplers(Gravimetric method) at Incheon, Korea, between May and August, 2014. The purpose of this study was to suggest the quality assurance/quality control (QA/QC) method of each instrument for use in a real-time continuous particle sampler to measure the mass of airborne particles with an aerodynamic diameter less than $2.5{\mu}m$ ($PM_{2.5}$). Five real-time particle samplers of BAM1020, FH62C_14, TEOM, PM-711 and SPM-613 were evaluated by comparing its measured 23 hr average $PM_{2.5}$ concentrations with those measured with NRM filter-based samplers simultaneously. The parameters(e.g. Inlet heating condition, Slope factor, Film response, Intercept, Background, Span value) of the real-time samplers were optimized respectively by conducting test performance evaluation during 7 days in field sampling. For example, inlet heating temperature of TEOM sampler controls $35{\sim}40^{\circ}C$ to minimize the fluctuation of the real-time measurement data and background value of BAM1020 is the key factor affecting the accuracy of $PM_{2.5}$ mass concentration. We classified the $PM_{2.5}$ concentration according to relative humidity (80%) to identify water absorbed in aerosols by measuring the ${\beta}$-ray samplers(BAM1020, FH62C_14) and TEOM. ${\beta}$-ray samplers were not strongly affected by relative humidity that the difference of the average $PM_{2.5}$ concentration was about 5%. On the other hand, The TEOM sampler overestimated $PM_{2.5}$ mass concentration about 15% at low relative humidity (<80%).

디지털 스위칭 노이즈를 감소시킨 베타선 센서 설계 (A Study on the Design of a Beta Ray Sensor Reducing Digital Switching Noise)

  • 김영희;김홍주;차진솔;황창윤;이동현;라자 무하마드 살만;박경환;김종범;하판봉
    • 한국정보전자통신기술학회논문지
    • /
    • 제13권5호
    • /
    • pp.403-411
    • /
    • 2020
  • 기존에 진성난수 생성기를 위한 베타선 센서 회로의 아날로그 회로와 비교기 회로에 사용되는 파워와 그라운드 라인은 서로 공유하므로 비교기 회로의 디지털 스위칭에 의해 발생되는 파워와 그라운드 라인에서의 전압강하가 CSA를 포함한 아날로그 회로의 출력 신호 전압이 감소하는 원인이었다. 그래서 본 논문에서는 디지털 스위칭 노이즈의 source인 비교기 회로에 사용되는 파워와 그라운드 라인을 아날로그 회로의 파워와 그라운드 라인과 분리하므로 CSA(Charge Sensitive Amplifier) 회로를 포함한 아날로그 회로의 출력신호전압이 감소되는 것을 줄였다. 그리고 VREF(=1.195V) 전압을 VREF_VCOM과 VREF_VTHR 전압으로 변환해주는 전압-전압 변환기 회로는 PMOS current mirror를 통해 IREF를 구동할 때 PMOS current mirror의 드레인 전압이 다른 경우 5.5V의 고전압 VDD에서 channel length modulation effect에 의해 각각의 current mirror를 통해 흐르는 구동 전류가 달라져서 VREF_VCOM과 VREF_VTHR 전압이 감소하는 문제가 있다. 그래서 본 논문에서는 전압-전압 변환기 회로의 PMOS current mirror에 PMOS 다이오드를 추가하므로 5.5V의 고전압에서 VREF_VCOM과 VREF_VTHR의 전압이 down되지 않도록 하였다.

68Ga-DOTATOC PET/CT에서 Prompt Gamma Correction을 적용한 SUV의 평가 (Evaluation of Standardized Uptake Value applying Prompt Gamma Correction on 68Ga-DOTATOC PET/CT Image)

  • 윤석환
    • 한국방사선학회논문지
    • /
    • 제12권1호
    • /
    • pp.1-7
    • /
    • 2018
  • $^{68}Ga$ 방사성 핵종은 $^{68}Ge/^{68}Ga$ 제너레이터에서 생산되는 양전자 방출핵종으로서 PET 검사에 이용되는 방사성 핵종이다. $^{68}Ga$은 67.8분의 반감기를 가지고 88.9 %의 ${\beta}$+ 붕괴와 11.1 %의 전자포획으로 $^{68}Zn$으로 붕괴된다. ${\beta}$+ 붕괴 과정에서 87.7 %는 기저상태의 $^{68}Zn$로 붕괴되며, 1.2 %는 여기상태의 $^{68}Zn$로 붕괴된다. 여기상태의 $^{68}Zn$은 1.077 Mev의 ${\gamma}$선을 방출하며 기저상태의 $^{68}Zn$가 된다. 이때 방출되는 1.077 Mev의 ${\gamma}$선을 Prompt Gamma라 하며, Prompt Gamma-ray가 환자와 상호작용하게 되면 저에너지 ${\gamma}$선의 산란선이 발생되게 되는데 이 산란선이 PET의 동시계수 회로에 검출되어 질 수 있다. 이 연구의 목적은 $^{68}Ga$을 이용하는 PET검사 중 신경내분비 종양진단에 사용되는 $^{68}Ga$-DOTATOC PET/CT영상에 Prompt Gamma-ray 보정 전 후의 표준섭취계수(SUV)를 평가해 보고자 하였다. $^{68}Ga$-DOTATOC PET/CT를 시행한 15명의 환자에 대해서 병변부위(Pancreas, Liver, Thoracic Spine, Brain)와 정상으로 섭취되는 조직(Pituitary, Lung, Liver, Spleen, Kidney, Intestine)의 SUVmax와 SUVmean을 비교하였으며, 임상영상의 정량적 평가를 위해 Target to Background Ratio(TBR)을 산출하여 비교하였다. Prompt Gamma-ray 보정 후 Thoracic Spine을 제외한 병변부위와 Pituitary를 제외한 정상조직에서 SUVmax, SUVmean은 높은 값을 나타내었으며, TBR은 Prompt Gamma-ray 보정 전 후 각각 $51.51{\pm}49.28$, $55.50{\pm}53.12$로 보정 후 높은 값을 나타냈다. (p<0.0001)

보건소 결핵관리사업 평가 (Evaluation of a Tuberculosis Control Program at Community Health Centers)

  • 황은정
    • 한국보건간호학회지
    • /
    • 제21권2호
    • /
    • pp.241-251
    • /
    • 2007
  • Purpose: To identify the effects on tuberculosis mortality of a tuberculosis control program conducted at 108 community health centers in terms of structure and process. Methods: The dependent variable was tuberculosis mortality, and the independent variables were the structure(type of centers, staff, nurses, doctors, budget) and process(chest X-ray checking, immunization, case detection, health education, patients registering & managing) of the tuberculosis control programs at the community health centers. Data were analyzed using descriptive analysis and stepwise regression analysis. Result: Tuberculosis morality was positively correlated with type of centers(rural area)(p<0.01), but negatively correlated with type of centers(large cities) (p<0.01), (middle cities)(p<0.05), staff FTE(p<0.05), and number of nurses(p<0.05). Regression analysis indicated that type of centers(rural area)($\beta$=0.457) and case detection($\beta$=0.234) had a significant effect on tuberculosis mortality. Conclusion: Ultimately, this study will provide information to improve the effectiveness of tuberculosis control programs in community health centers.

  • PDF

RF-Sputtering 법에 의한 SiC 나노와이어의 특성연구 (A Characteristic study of SiC Nanowires by RF-Sputtering)

  • 정창구;김태규
    • 열처리공학회지
    • /
    • 제23권6호
    • /
    • pp.344-349
    • /
    • 2010
  • Silicon carbide nanowires were grown by heat treatment of the films at $1200^{\circ}C$ after amorphous SiC thin films were deposited on graphite substrate by radio frequency magnetron sputtering at $600^{\circ}C$. It was confirmed that SiC nanowires with the diameter of 20-60 nm and length of about 50nm were grown from Field Emission Scanning Election Microscope (FE-SEM) and Transmission Election Microscope (TEM) observation. The diameter of nanowires was increased as heat treatment time is increased. The nanowires were identified to ${\beta}$-SiC single crystalline from X-Ray Diffraction(XRD) analysis. It was observed from this study that deposition temperature of samples was critical to the crystallization of nanowires. On the other hand, the effect of deposition time was insignificant.

Copper (II) phthalocyane의 기판 예열 온도에 따른 상전이 현상 연구 ((Phase transition of Copper (II) Phthalocyanine due to a heat treatment temperature of substrate))

  • 박미화;윤순일;임은주;이기진
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
    • /
    • pp.143-146
    • /
    • 2003
  • 열증착법을 이용하여 copper(II) phthalocyane (CuPc)의 박막을 제작하였다. 기판의 예열 온도를 달리하여 제작된 CuPc의 박막을 x-ray diffraction, SEM, UV visible absorption spectra의 변화를 통해 관찰한 결과 결정의 구조에 따라 ${\alpha}$-phase와 ${\beta}$-phase로 구분할 수 있었다. 이러한 결정 구조의 변화는 CuPc 박막의 전기전도 특성에 영향을 달리하여 유기발광 소자에 응용이 가능할 것으로 예상된다.

  • PDF

The Characteristics Study on Detector for In-pipe Radioactive Contamination Counting

  • Seo B. K.;Kim G. H.;Jung Y. H.;Woo Z. H.;Oh W. Z.;Lee K. W.;Han M. J.
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
    • /
    • pp.269-279
    • /
    • 2005
  • In this study, detectors characteristics for simultaneous counting of alpha and beta ray in a pipe were estimated. The detector were composed of thin ZnS(Ag) scintillator and plastic detector. The scintillator for counting alpha particles has been applied a polymer composite sheet, having a double layer structure of an inorganic scintillator ZnS(Ag) layer adhered onto a polymer sub-layer. The other for counting beta particles used a commercially available plastic scintillator. It was confirmed that the detectors were suitable for counting the in-pipe contamination.

  • PDF

석출물과 전위에 기인한 초음파 비선형성 파라미터 (Ultrasonic Nonlinearity Parameter Due to Precipitate and Dislocation)

  • 김정석;박익근
    • 한국정밀공학회지
    • /
    • 제25권7호
    • /
    • pp.131-138
    • /
    • 2008
  • The microstructural effects on the ultrasonic nonlinearity were investigated in isothermally degraded ferritic 2.25Cr-1Mo steel and low cycle fatigued copper. The variation in ultrasonic nonlinearity (${\beta}/{\beta}_0$) was interpreted as resulting from microstructural changes supported by the electron microscopy and X-ray diffraction, in addition to the mechanical test (Victor's hardness and ductile-brittle transition temperature). The ultrasonic nonlinearity of 2.25Cr-1Mo steel increased abruptly in the initial 1,000 h of degradation, and then changed little due to the coarsening of carbide and precipitation of stable $M_6C$ carbide during isothermal degradation. The ultrasonic nonlinearity of copper increased with the fatigue cycles due to the evolution of dislocation cell substructure.