• Archives of Pharmacal Research
• /
• v.26 no.9
• /
• pp.763-767
• /
• 2003

The differences in pharmacokinetic behavior and tissue distribution of verapamil and its enantiomers were investigated in rats. In high-performance liquid chromatographic method, an achiral ODS column (150 mm $\times$ 4.6 mm i.d.) with the mobile phase consisting of methanol-water (73:30, v/v) was used for the determination of the concentration for racemic verapamil, and a Chiralcel OJ column (250 mm$\times$4.6 mm i.d.) with the mixture of n-haxane-ethanol-triethylamine (85:15:0.2, v/v/v) as mobile phase was used to determine the concentrations of verapamil enantiomers. A fluorescence detector in the analytical system was set at excitation and emission wavelengths of 275 nm and 315 nm. The differences between enantiomers were apparent in the pharmacokinetics in rats. The area under the concentration-time curve (AUC) of S-(-) verapamil was higher than that of R-(+) verapamil. The half-distribution time ($T_{1/2(\alpha)}$) of S-(-) verapamil which distributing to tissue from blood was shorter than that of R-(+) verapamil, but the elimination half-time ($T_{1/2(\beta)}$) was longer in rat following oral administration of racemic verapamil. At 1.3 h after oral administration of racemic verapamil, however, there were no significant differences between enantiomers for the distributions in major tissues such as heart, cerebrum, cerebellum, liver, spleen and kidney.

• Korean Journal of Materials Research
• /
• v.29 no.9
• /
• pp.547-552
• /
• 2019

In the present study, the thermal conductivity of a silicon nitride($Si_3N_4$) thin-film is evaluated using the dual-wavelength pump-probe technique. A 100-nm thick $Si_3N_4$ film is deposited on a silicon (100) wafer using the radio frequency plasma enhanced chemical vapor deposition technique and film structural characteristics are observed using the X-ray reflectivity technique. The film's thermal conductivity is measured using a pump-probe setup powered by a femtosecond laser system of which pump-beam wavelength is frequency-doubled using a beta barium borate crystal. A multilayer transient heat conduction equation is numerically solved to quantify the film property. A finite difference method based on the Crank-Nicolson scheme is employed for the computation so that the experimental data can be curve-fitted. Results show that the thermal conductivity value of the film is lower than that of its bulk status by an order of magnitude. This investigation offers an effective way to evaluate thermophysical properties of nanoscale ceramic and dielectric materials with high temporal and spatial resolutions.

• Journal of Life Science
• /
• v.27 no.1
• /
• pp.38-43
• /
• 2017

Glycosyl aesculin, a potent anti-inflammatory agent, was synthesized by transglycosylation reaction, catalyzed by Thermotoga neapolitana ${\beta}-glucosidase$, with aesculin as an acceptor. The key reaction parameters were optimized using response-surface methodology (RSM) and $2{\mu}g$ of the enzyme. As shown by a statistical analysis, a second-order polynomial model fitted well to the data (p<0.05). The response surface curve for the interaction between aesculin and other parameters revealed that the aesculin concentration and reaction time were the primary factors that affected the yield of glycosyl aesculin. Among the tested factors, the optimum values for glycosyl aesculin production were as follows: aesculin concentration of 9.5 g/l, temperature of $84^{\circ}C$, reaction time of 81 min, and pH of 8.2. Under these conditions, 61.7% of glycosyl aesculin was obtained, with a predicted yield of 5.86 g/l. The maximum amount of glycosyl aesculin was 6.02 g/l. Good agreement between the predicted and experimental results confirmed the validity of the RSM. The optimization of reaction conditions by RSM resulted in a 1.6-fold increase in the production of glycosyl aesculin as compared to the yield before optimization. These results indicate that RSM can be effectively used for process optimization in the synthesis of a variety of biologically active glycosides using bacterial glycosidases.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.725-729
• /
• 2006

A method was developed for the determination of fructooligosaccharides and raffinose contents in infant formula. The samples were extracted and analyzed by liquid chromatography equipped with carbohydrate column and evaporative light scattering detector. The mobile phase used for the gradient mode was water-acetonitrile, at a flow rate of 1.0mL/min. The method showed a mean recovery of 95-99%, the relative standard deviation obtained in the precision study was 0.774-8.982%, the quantification and detection limits were 25-50mg/L.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.697-703
• /
• 2006

Endocrine disruptors were measured with GC/MS in effluents discharged from sewage treatment processes in pilot scale for the purpose of water reuse. From that analysis, we compared the removal rate of them by treatment processes. Nonylphenol was mainly detected in effluents and high concentration from 0.36 to 0.94 ${\mu}g/L$. $17{\beta}$-estradiol(E2) and $17{\alpha}$-ethynylestradiol(EE2) were detected as below the limit of detection in effluent. Endocrine disruptors were removed effectively in the range from 50 to 100% by treatment process. EC50 value($9.0{\times}10^{-3}$ M) of $17{\beta}$-estradiol(E2) by dose response curve of E-screen assay has higher than that of bisphenol A($2.736{\times}10^{-5}M$) and p-octylphenol($9.760{\times}10^{-6}$ M). These results showed that alkylphenols have lower relative estrogen potency than other estrogens such as $17{\beta}$-estradiol(E2). Calculated estrogenic activity(ng-EEQ/L) was 2 times higher than measured total estrogenic activity which estimated by E-screen assay. Moreover estrogenic activity of effluent by treatment process showed very low as below 1 ng-EEQ/L.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.1
• /
• pp.13-18
• /
• 1998

The purpose of this study was to determine pharmacokinetic parameters of vancomycin using the compartment model dependent and compartment model independent analysis in 6 Korean normal volunteers and 8 ovarian cancer patients. Vancomycin was administered 1.0 g bolus by IV infusion over 60 minutes. The elimination rate constant ($\beta$), volume of distribution (Vd), total body clearance (CLt), and area under the plasma level-time curve (AUC) of vancomycin in normal volunteers using the compartment model dependent analysis were $0.150\pm0.030\;hr^{-1},\;32.9\pm2.81\;L/kg,\;5.36\pm0.63\;L/hr,\;and\;186.5\pm20.5\;{\mu}g/ml{\cdot}hr$, respectively. The $\beta$, Vd, CLt, and AUC of vancomycin in ovarian cancer patients using the compartment model dependent analysis were $0.109\;0.008\;hr^{-1},\;41.5\pm3.01\;L/kg,\;4.58\pm0.57\;L/hr\;and\;218.3\pm22.9\;{\mu}g/ml{\cdot}hr$, respectively. There were significant differences (p<0.05,\;p<0.01) in $\beta$, Vd, CLt, and AUC between normal volunteers and ovarian cancer patients. The elimination rate constant (Kel), CLt, and AUC of vancomycin in normal volunteers using the compartment model independent analysis were $0.152\pm0.022\;hr^{-1},\;5.77\pm0.75\;L/hr,\;and\;173.2\pm22.5;{\mu}g/ml{\cdot}hr$, respectively. The Kel, CLt, and AUC of vancomycin in ovarian cancer patients using the compartment model independent analysis were $0.126\pm0.012\;hr^{-1},\;4.96\pm0.55\;L/hr,\;and\;201.7\pm25.6;{\mu}g/ml{\cdot}hr$, respectively. There were significant differences (p<0.05, p<0.01) in Kel, CLt, and AUC between normal volunteers and ovarian cancer patients. And also, there was significant difference (p<0.05) in Kel of vancomycin in ovarian cancer patients between the compartment model dependent and independen analysis. It is necessary for effective dosage regimen of vancomycin in ovarian cancer patient to use these population parameters.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1281-1287
• /
• 2015

Background: Early detection of hepatocellular carcinoma using serological markers with better sensitivity and specificity than alpha fetoprotein (AFP) is needed. Aims: The aim of this study was to evaluate the diagnostic value of serum sICAM-1, ${\beta}$-catenin, IL-8, proteasome and sTNFR-II in early detection of HCC. Materials and Methods: Serum levels of IL-8, sICAM-1, sTNFR-II, proteasome and ${\beta}$-catenin were measured by ELISA assay in 479 serum samples from 192 patients with HCC, 96 patients with liver cirrhosis (LC), 96 patients with chronic hepatitis C (CHC) and 95 healthy controls. Results: Serum levels of proteasome, sICAM-1, ${\beta}$-catenin and ${\alpha}FP$ were significantly elevated in HCC group compared to other groups (P-value<0.001), where serum level of IL-8 was significantly elevated in the LC and HCC groups compared to CHC and control groups (P-value <0.001), while no significant difference was noticed in patients with HCC and LC (P-value=0.09). Serum level of sTNFR-II was significantly elevated in patients with LC compared to HCC, CHC and control groups (P-value <0.001); also it was significantly higher in HCC compared to CHC and control groups (P-value <0.001). ROC curve analysis of the studied markers between HCC and other groups revealed that the serum level of proteasome had sensitivity of 75.9% and specificity of 73.4% at a cut-off value of $0.32{\mu}g/ml$ with AUC 0.803 sICAM-1 at cut off value of 778ng/ml, the sensitivity was 75.8% and the specificity was 71.8% with AUC 0.776. ${\beta}$-catenin had sensitivity and specificity of 70% and 68.6% respectively at a cut off value of 8.75ng/ml with an AUC of 0.729. sTNFR-II showed sensitivity of 86.3% and specificity of 51.8% at a cut off value of 6239.5pg/ml with an AUC of 0.722. IL-8 had sensitivity of 70.4% and specificity of 52.3% at a cut off value of 51.5pg/ml with AUC 0.631. Conclusions: Our data supported the role of proteasome, sICAM-1, sTNFR-II and ${\beta}$-catenin in early detection of HCC. Also, using this panel of serological markers in combination with ${\alpha}FP$ may offer improved diagnostic performance over ${\alpha}FP$ alone in the early detection of HCC.

• Radiation Oncology Journal
• /
• v.6 no.1
• /
• pp.1-11
• /
• 1988

Recovery from potentially lethal damage (PLDR) after irradiation was studied in plateau-phase culture of Vero cells in vitro. Unfed plateau-phase cells were irradiated with dose of 1 to 9Gy using Cs-137 irradiator. Cells then were incubated again and left in situ for 0, 1, 2, 3, 4, 5, 6, and 24 hours and then were trypsinized explanted, and subcultured in fresh RPMI-1640 media containing $0.33\%$ agar. Cell survival was measured by colony forming ability. An adequate number of heavily irradiated Vero cells were added as feeder cells to make the total cell number constant in every culture dish. As the postirradiation in situ incubation time increased, surviving fraction increased by PLDR. The rate of PLDR was so rapid that increased surviving fraction reached saturation level at 2 to 4 hours after in situ incubation. As the radiation dose increased, the rate of PLDR fastened and the magnitude of increased surviving fraction at saturation level by PLOR also increased. In analysis of cell survival curve fitted to the linear-quadratic model, the linear inactivation coefficient $(\alpha)$ decreased largely and reached nearly to zero but the quadratic inactivation coefficient $(\beta)$ increased minimally by increment of postirradiation in situ incubation time. So PLDR mainly affected the damage expressed as $\alpha$, In the multitarget model, significant change was not obtained in $D_0\;but\;in D_q$. Therefore, shoulder region in cell survival curve was mainly affected by PLDR and terminal slope was not influenced at all. And dose-modifying factor by PLDR was relatively higher in shoulder region, that is, in low dose area below 3 Gy.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.138-146
• /
• 2008

The chemical compositions, cell wall biopolymers and non-isothermal behavior of the stem biomass of Nicotiana Tabacum originated from tobacco industry were investigated in depth. On a weight basis, the contents of total ash and total sugar are 19.1% and 20.7% respectively. Lignin content was around 3% of tobacco stem biomass while pectin was over 7%. The holo-cellulose content in cell wall biopolymer was around 13% and the $\alpha$-cellulose constitutes 60% of the total holo-cellulose. The thermal behavior of stem biomass showed different patterns depending on either inert (nitrogen) or oxidizing (air) atmospheric condition. In the air atmosphere, the rapid thermal decompositions at around $473^{\circ}C$ and $581^{\circ}C$ were recorded as the peaks in DTG curve, while the peaks were not shown in the nitrogen atmosphere condition. The thermal analysis of the freeze dried soluble obtained from hot water extraction of tobacco stem biomass showed that the rapid thermal decomposition at around $581^{\circ}C$ in the air atmosphere was due to the residual char originated from the soluble fraction. The distinct difference in thermal decomposition between hemicellulose and cellulose were easily found in the DTG curve obtained in the nitrogen atmosphere.

• Journal of Korean Society of Forest Science
• /
• v.79 no.1
• /
• pp.1-15
• /
• 1990

In this study the stem analysis program, which can be operated with personal computer was developed to reduce time and cost of calculation, and to increase accuracy of analysis. The stem analysis method used in this program was compared with other methods. The results obtained were as follows : The value, 1/100mm measured from the latest annual ring measurement machine (Jahrringme${\beta}$geraete Johan Type II) was automatically inputed to the computer and saved into given file name. Turbo Pascal program was written to do this. The measured data was analyzed by stem analysis calculation program written by Fortran-77. Volume and height increments were approximated by spline function, and diameter of the stem disk was calculated by quadratic mean method. The increment values calculated by the programs were printed annually and in every five-year. Stem analysis diagram and several increment graphs were also easily printed. The result compared between those analysis methods showed that quadratic mean could reduce the error caused from eccentric pith. When the stem taper curve method, approximated by spline function, was used in the calculation of tree height and volume, increments would be more exactly calculated.