• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.10-18
• /
• 2020

In the case of a belt-pulley type CVT that transmits a driving force by using a variable pulley and a metal belt, slippage occurs due to transmission of power by using a belt, which results in a decrease in efficiency. Therefore, in this study, the rails were machined on the plate surface of the pulley to reduce the friction and slip between the belt and the pulley while applying the characteristics of the CVT. As the plate is rotated by the shape of the rail, a centrifugal belt pulley type continuously variable transmission system which shifts while varying the radius of rotation of the belt that transmits power is studied. Accordingly, the structure of the pulley was designed and the centrifugal belt pulley type continuously variable transmission was Manufactured. In addition, to verify the suitability of the manufactured transmission, the power transmission efficiency was monitored by establishing an interface with the controller. The structural analysis of the plate proved the suitability of the centrifugal belt pulley type continuously variable transmission.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.714-716
• /
• 1997

In order to prevent the belt from being damaged by metal pieces, we developed multicoil-type metal detection system. This detects the presence of belt clips and position of metal pieces in ores being transported on conveyor belt. In this research, our coil sensor of multicoil-type metal detection system is divided into two parts, exciting part (transmitter coil) and sensing part composed of two receiver coils. Each receiver coil has several coils in the direction of belt width. Multicoil-type metal detection system is operated by supplying a transmitter coil with electric power resources to generate magnetic field, and then the change of magnetic flux resulted from a metal piece on the conveyor be a is induced into sensing coils. We can prevent detector from failing to catch metal pieces due to high threshold level produced by steel belt clips and male the sensitivity of belt-width direction uniform by using multicoil-type metal detection system. Besides, this developed system can recognize precise position and size of metal piece. The experiments shows that our multicoil-type metal detection system has better performances than the conventional metal piece detector.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.134-145
• /
• 1996

Since the skid-steer loader is able to work for excavating, lifting and transporting load even at the narrow space, they are widely used in the regular farm and the livestock farm. The skid-steer loader normally adopts the hydrostatic transmission because the power to move the machine backward and forward should be delivered independently on both sides of wheels. Contrast to the mechanical system such as chain and belt transmissions, however, the hydrostatic transmission is less efficient in the use of energy and more difficult in the maintenance. This study was intended to investigate the feasibility of using triangular-type belt clutch and V-belt transmission for the newly developed skid-steer loader in order to overcome the problems stated in the hydrostatic transmission. In the developed triangular-type belt clutch, the centers of driving, driven and idler sheaves are arranged in the triangular shape in a plane, and V-belts were loaded loosely on three sheaves. The power is transmitted by pressing the idler connected to a lever on the loosened V-belt. Contrast to the normal belt clutch using two sheaves, the newly developed belt clutch has the characteristics of small contact-angle of the driving sheave at no bucket load and increasing contact-angle at the time of power transmission. The results of research can be summarized as follows: 1) The developed triangular-type belt clutch adopted a spring-loaded slackside idler which could transmit more power than a fixed idler could by sacrificing the belt life. The life of V-belt used in the power transmission reached at 500 hours(6 months) when the engine power of 11.8 ㎾ was transmitted. Also, it was feasible to develop the large industrial skid-loader with the V-belt transmission by using the proper set of sheaves. 2) The developed skid-steer loader changed the rotating radius and speed with bucket loads as the conventional skid steer loader did. The rotating speed was 47 deg/s at the maximum bucket load of 2.74 kN when the minimum rotating radius was 1.5m. 3) The power required in turning at the bucket load of 2.74 kN was 4 ㎾ and the slippage of V-belt was less than 1%.

• Journal of Biosystems Engineering
• /
• v.24 no.2
• /
• pp.99-106
• /
• 1999

This study was conducted to provide a direction for improving the performance of triangular-type belt clutch. The power transmission characteristics and the wear of belt were investigated for two types of pulley set theoretically and experimentally. The results of research were summarized as follows: 1) Based on the theoretical analysis for the life time of belt, the wear of belt could be reduced by increasing the sizes of driving V-pulley and tension pulley, and by decreasing the tension on V-belt. 2) The pulley set # 2 could transmit more power than the pulley set # 1 could at the same slop rate. While the slip rate was 2.36% on the pulley set # 2 at the maximum power transmission, the slip rate on the pulley set # 1 was increased up to 12.2% at the same condition. 3) From the 16 hours' fatigue test, the wear of belt used n the pulley set # 1 was observed severer than that in the pulley set#2. Also, it was found that the tensile strength of belt used in the pulley set # 2 was greater than that of belt used in the pulley set # 1.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.1
• /
• pp.20-26
• /
• 2000

In order to propose the design and installation information of vegetation belt, field investigation were carried out in the noise pollution control facilities of highway and the streets of a city for two years(1998~1999), and field tests were performed to analyze the noise attenuation effect of them. The noise pollution control facilities were generally classified into three types (noise barrier and vegetation belt type, mounding and vegetation belt type, vegetation belt type only). Most soundproof facilities were proved the noise reduction effects. But according to width, height, structure, auditory distance and planting forms of them, difference of noise reduction effects were investigated. The soundproof facility was suitable the mounding and vegetation belt type in the consideration of road environment, and the installation standard of vegetation was estimated that the width of vegetation was at least 20m and the length of that was 2 times in the distance from noise source.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.86-92
• /
• 2006

In the automobile and machine industry, Forming type conveyer system have problems in that hinge belt plate are stretched, produce a noise and get abrasion. they make the machine get out of order. we make hinge belt thicker for reducing the trouble. Thick hinge belt was stronger. But it was heavier. And it was hard to come up with buyer's expectations because the mold which makes the hinge belt have limit of strength, life cycle and size. So, we developed the machine welded each part of hinge belt plate.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.275-285
• /
• 2020

The aims of this study was to examine the effect on the hand disinfection performance, the performance rate, and the satisfaction with the use of the belt-type hand sanitizers in clinical nurses. The study is a one group pre-post test quasi-experimental design. Effectiveness of using the belt-type hand sanitizers was measured with a self-reporting questionnaire. As a result, the performance of hand disinfection and the performance rate were significantly higher after using the belt-type hand sanitizers, and also, the satisfaction with the use of the belt-type hand sanitizers was significantly high. The belt-type hand sanitizer is effective method to improve both hand disinfection performance and its performance rate. Therefore, if the belt-type hand sanitizer is used in clinical practice, it may contribute to the improving the hand disinfection performance and its performance rate.

• Journal of the Korean Society of Costume
• /
• v.55 no.4 s.94
• /
• pp.49-61
• /
• 2005

This study is to research the types and formation of the pieces for fastening the clothing in the western and oriental world from 18c to 19c. The pieces for fastening the clothing, depending on their formation, are classified as the ribbon type, the belt type, the button type, and the compound type. The ribbon type indicates fastening the clothing with the strips attached to the clothes. It is divided into the symmetry type and the asymmetry type by the looks of the ribbon alter it is tied. The belt type means fastening the clothing with a string or a belt, separated from the clothes. It is divided into the string type and the belt type. The button type is to fasten the clothing with buttons, button holes, and hooks. It is divided into the basic type, the wrapping type, and the knot type. The compound type is a mixture of two or three types out of the ribbon type, the belt type, and the button type. The pieces for fastening the clothing has aesthetic features as well as their functional characteristics. It has beautiful features like the harmonious beauty of Yin and Yen shown in the asymmetrical types, the beauty of spell wishing for health, long-life, wealth, wisdom, and so on, the beauty of decency showing the intention of refraining from exposing their body in public, the beauty of eroticism emphasizing the beauty of the human body, and the beauty of representing their social class, authority, affiliation, and so on.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.79-88
• /
• 2000

Draw textured yarns have many differences with yarn quality as well as wearing, due to the bulkiness, thermal and physical properties according to the false twist texturing system. In order to improve such property, many studies have been accomplished for developing good textured yarns and their fabrics, but these have been essentially obtained by experimental data or mathematical analysis. This study surveyed various properties of DTY produced by false twist texturing system, namely pin and crossed-belt false twist insertion systems. And 6 yarn specimens of 2 group(pin twisting type, belt twisting type) were measured and analysed.

• Journal of the Korean Home Economics Association
• /
• v.36 no.6
• /
• pp.41-56
• /
• 1998

The Yo-Dae(belt) was made of cloths and leather orginally. Then, it was decorated with metal decoration to become more developed luxury one. The Kwa-Dae of the Three Kingdom period is called as final shape among those ancient mode. Dae-Gu(The origin of belt buckle) was the metallic decoration of the leather belt that the northern nomadic tribe used to wear it. It was considered that the Dae-Gu was more decorated and changed to Kwa-Dae with Yo-Pae. The first stage Dae-Gu didn't have the hook, but a short hook only could move the belt itself was created, and then a movable short hook(China-Jin period Kwa-Dae, etc) to be inside of belt was showed, after that an axis was necessary when it became to long one, It was completed as a belt buckle. The stick shape hook was main stream in China an dthe other northern countries. Meanwhile, Korea has mostly "T" shape hook, and it shows that we developed our own unique style. Classifying the type of the belt plague, there are five types due to the scarved shapes on the Kwa-Dae and the changes. Mainly based on the excavated tomb articles of the three kingdoms and referred to Chinese and Japanese ones. It showed that the belt plague was lightly influenced by the times and area, but was slowly changed and developed to different types through those each ages generally.