• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.2
• /
• pp.83-91
• /
• 2008

GMAW(Gas Metal Arc Welding) processes are usually used in industrial side in order to get its high productivity. But those are only adopted in the semi-automated welding equipment because of a lot of welding spatters. Many industrial robot actually percents from being engaged in the welding processes. The welding spatter problem of causes blocking them being a fully automated welding process.This study was carried out to investigate the optimal conditions for minimizing welding spatter generation at GMAW robot. The spatter can be significantly reduced below 2% of welding spatter generation at the following conditions ; First, below 18V at the wire-feed rate 2.0mm/min Second, below 23V at the wire-feed rate 3.6mm/min Third, below 24V at the wire-feed rate 5.5mm/min.

• Honam Mathematical Journal
• /
• v.33 no.2
• /
• pp.279-300
• /
• 2011

For a subset system M on any poset, M-Scott notions, such as M-way below relation,M-continuity,M-Scott convergence (of nets and filters respectively) and M-Scott topology are proposed Any approximating auxiliary relation on a poset can be represented by an M-way below relation such that this poset is M-continuous. It is shown that a poset is M-continuous iff the M-Scott topology is completely distributive. The topology induced by the M-Scott convergence coincides with the M-Scott topology. If the M-way below relation satisfies the property of interpolation then a poset is M-continuous if and only if the M-Scott convergence coincides with the M-Scott topological convergence. Also, M-continuity is characterized by a certain Galois connection.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1241-1246
• /
• 2001

In this study, we measured and analyzed the interior noise, the rolling noise and the engine noise at Honam line(Seodaejeon- Jangseong) for passenger and power cars. The noise level is below 69㏈A for Seamaeul PMC(Powered Motor Car) coachs, below 65㏈A for Seamaeul and Mukungwha coachs, over 80㏈A for the driver's room of PMC and DEL (Diesel-Electric Locomotive). We also proposed the criteria of interior noise in free field conditions, below 67㏈A for passenger cars, below 86㏈A for power cars.

• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.97-101
• /
• 2007

A CRDI diesel engine used to commercial vehicle was fueled with diesel fuel and 5% biodiesel blended fuel (BDF 5%) and tested at the Seoul-10 mode for 150 hours. Engine dynamometer testing was completed at regularly scheduled intervals to monitor the engine performance and exhaust emissions. To check the engine parts (valve, injector), the engine was inspected after 150 hours running test. It was concluded that there was no unusual deterioration of the engine, or the changes in engine power (below 2.6%), smoke (below 6.2%), NOx (below 2%) and durability characteristics in spite of operation of 150 hours run with BDF 5%. The difference of kinetic viscosity for engine oil (before and after durability testing) was below 0.36%

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.993-1002
• /
• 2022

This paper relates to a method of modeling the thrust dynamic load caused by the thrust variation occurring on the blade due to the tower shadow below the rated wind speed. A method that uses thrust coefficient is presented by introducing "tower shadow coefficient of thrust variation". For a 2MW wind turbine, the values of "tower shadow coefficient of thrust variation" are calculated and analyzed at wind speeds below the rated. The dynamic load model of thrust under tower shadow is evaluated in Matlab/Simulink using the obtained "tower shadow coefficient of thrust variation" and thrust coefficient. It shows that the thrust variations acting on the three blades by the tower shadow can be expressed using both the thrust coefficient and the introduced "tower shadow coefficient of thrust variation".

• Journal of Educational Research in Mathematics
• /
• v.18 no.3
• /
• pp.283-308
• /
• 2008

A poor achievement of basic competency leads to obstacles of the same subject and other subjects from a series of accumulative losses and social life. The Grade 3 National Diagnostic Assessment of Basic Competency (NDAHC) dated from 2002, Teaching Plan Responsible to Basic Competency and compensational education materials for students of the below-basic level has marked a line in the chain of policy to realize educational welfare. The goal of NDABC is to collect information of the reason with regard to learning deficiency and individual student's information, and ultimately teach them on the basis of those informations. This study analyzed the characteristics of below-basic students in the basic mathematics with data from NDABC from 2003 to 2007. Students of the below-basic level were affected in achievement by numerical distinction, regrouping, arrangement and descriptive form of item, information-providing way, typical example, familiarity, frequency in use in daily life etc. This study provides a basic important information with regard to teaching below-basic students and suggestions with compensational education materials for them.

• Journal of Environmental Science International
• /
• v.14 no.2
• /
• pp.157-165
• /
• 2005

This study was conducted to determine optimum design parameters in nitrification and denitrfication of chemical fertilizer wastewater using pilot plant, Jet Loop Reactor. The chemical fertilizer wastewater which contains low amounts of organic carbon and has a high nitrogen concentration requires a post-denitrfication system. Organic nitrogen is hydrolyzed above $86\%$, and the concentration of organic nitrogen was influent wastewater 126mg/L and of effluent wastewater 16.4mg/L, respectively. The nitrification above $90\%$ was acquired to TKN volumetric loading below $0.5\;kgTKN/m^3{\cdot}d$, TKN sludge loading below $0.1\;kgTKN/kgVSS{\cdot}d$ and SRT over 8days. The nitrification efficiency was $90\%$ or more and the maximum specific nitrification rate was $184.8\;mgTKN/L{\cdot}hr$. The denitrification rate was above $95\%$ and the concentration of $NO_3-N$ was below 20mg/L. This case was required to $3\;kgCH_3OH/kgNO_3-N$, and the effluent concentration of $NO_3^--N$ was below 20mg/L at $NO_3^--N$ volumetric loading below $0.7\;kgNO_3^--N/m^3{\cdot}d$ and v sludge loading below $0.12\;kgNO_3^-N/kgVSS{\cdot}d$. At this case, the maximum sludge production was $0.83\;kgTS/kgT-N_{re}$ and the specific denitrfication rate was $5.5\;mgNO_3-N/gVSS{\cdot}h$.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.3
• /
• pp.92-96
• /
• 2010

PURPOSE. The aim of this study was to evaluate the thickness of buccal and palatal alveolar bone and buccal bony curvature below root apex in maxillary anterior teeth of Korean adults using Cone-beam CT images. MATERIALS AND METHODS. The 3D image was reconstructed with dicom file obtained through CBCT from 20 - 39 year old Korean subjects (n = 20). The thickness of buccal and palatal plate, root diameter, the buccal bony curvature angle below root apex and the distance from root apex to the deepest point of buccal bony curvature were measured on maxillary anterior teeth area using OnDemand3D program. RESULTS. Mean thickness of buccal plate 3 mm below CEJ was $0.68{\pm}0.29\;mm$ at central incisor, $0.76{\pm}0.59\;mm$ at lateral incisor, and $1.07{\pm}0.80\;mm$ at canine. Mean thickness of palatal plate 3 mm below CEJ was $1.53{\pm}0.55\;mm$ of central incisor, $1.18{\pm}0.66\;mm$ of lateral incisor, $1.42{\pm}0.77\;mm$ of canine. Bucco-lingual diameter 3 mm below CEJ was $5.13{\pm}0.37\;mm$ of central incisor, $4.58{\pm}0.46\;mm$ of lateral incisor, and $5.93{\pm}0.47\;mm$ of canine. Buccal bony curvature angle below root apex was $134.7{\pm}17.5^{\circ}$ at central incisor, $151.0{\pm}13.9^{\circ}$ at lateral incisor, $153.0{\pm}9.5^{\circ}$ at canine. Distance between root apex and the deepest point of buccal bony curvature of central incisor was $3.67{\pm}1.28\;mm$ at central incisor, $3.90{\pm}1.51\;mm$ at lateral incisor, and $5.13{\pm}1.70\;mm$ at canine. CONCLUSION. Within the limitation of this study in Korean adults, the thickness of maxillary anterior buccal plate was very thin within 1mm and the thickness of palatal plate was thick, relatively. The buccal bony curvature below root apex of maxillary central incisor was higher than that of lateral incisor and canine and it seems that the buccal bony plate below root apex of central incisor is most curved.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.800-812
• /
• 2005

This study selected and classified the representative foods for diversifying Korean traditional foods in the globa1 market and derived the superior factor of each food by consumer survey (n=744). The superiority of Korean traditional foods was generally recognized as being in the order of 'Nutritional value' > 'Dietary culture' > 'Material' > 'Taste.' Kimchi, Tteok/Hangwa, and grilled foods were regarded as potent Korean traditional foods for global consumers. The survey about the superior factors of representative Korean traditional foods produced the following results. The superior factor of Bibimbap, Mandu, Jangachi, Joeotgal, Namul muchim Salad, Naengchae, and Ganjang was 'Variety of material or cuisine', that of Bap, Jut Samguetang, Seolleongtang, Kimchi, Doenjang, and Sikcho was 'Nutritional value', that of Naengmyeon, Kalguksu, Bulgogi, Pyeonyuk, Jeongol, Gochujang, Tteot and Sjkhae/Sujeonggwa was Taste', and that of Hangwa, Hwachae, Gujulpan, and Sinsunro was 'Appearance'. The superior factors of representative Korean traditional foods showed the following differences by age and gender, The superior factor in Mandu was 'Taste' by the subjects aged below 30 but 'Variety' by the subjects aged above 30; that in Pyeonyuk and Jeongol was 'Variety' in 31-40 year olds and those aged above 51, while it was 'Taste' in others. The superior factor of Kimchi was 'Nutritional value' by the subjects aged below 40,'Taste'in 41-50 year. olds, and 'Variety' by the subjects aged above 50, that of Namul muchim was 'Nutritional value' by the subjects aged below 20 and 'Variety'by the subjects aged above 20, and that of Naengchae was' Taste'by the subjects aged below 20 and 'Variety' by the subjects aged above 20. The superior factor of Gochujang was 'Taste' by the subjects aged below 50 and 'Variety 'by the subjects aged above 50, that of Ganjang was 'Variety' by the subjects aged below 30 and 'Taste' by the subjects aged above 30, that of Sikcho was 'Variety' by the subjects aged below 30 and 'Nutritional value' by the sutjects aged above 30. The superior factor of Doenjang was 'Nuttritional value' in all ages. The superior factors of Hangwa and Sikhae/Sujeonggwa were 'Appearance' and 'Taste' in all ages, and that of Hwachae was 'Taste' by the subjects aged below 30 and' Appearance' by the subjects aged above 30. The perception by gender was statistically differed for traditional foods such as Bap, Bibimbap, Kalguksu, Bulgogi, Pyeonyuk Jangachi, Gochujang, Ganjang, Sikhae/Sujeonggwa, Hwachae, and Gujulpan.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.375-383
• /
• 2023

Objectives: Coal-fired power plants feature diverse working conditions, including multi-layered employment structures and irregular work cycles due to outsourcing and non-standardized tasks. The current uniform occupational environment measurement systems have limitations in accurately assessing and evaluating these varied conditions. This study aims to propose alternative measurement and assessment strategies to supplement existing methods. Methods: Major domestic coal-fired power plants were selected as the study targets. To prepare for the study and establish strategies, work processes were identified and existing occupational environment measurement results were compared and analyzed. The study proceeded by employing three strategies: specific exposure groups (SEGs) measurement, continuous monitoring, and supplementary measurements, which were then compared and discussed. Results: Previous exposure index evaluations (5,268 cases) indicated that crystalline silica, a type of respirable particulate matter, had detection limits below the threshold (non-detectable) in 82.6% (4,349 cases) of instances. Exposures below 10% of the exposure limit were observed at a very low concentration of 96.1%. Similar exposure group measurements yielded results where detection limits were below the threshold in 38.2% of cases, and exposures below 10% of the limit were observed in 70.6%. Continuous monitoring indicated detection limits below the threshold in 12.6% of cases, and exposures below 10% of the limit were observed in 75.6%. Instances requiring active workplace management accounted for more than 30% of cases, with SEGs at 11.8% (four cases), showing a higher proportion compared to 3.0% (four cases) in continuous monitoring. For coal dust, exposures below 10% of the limit were highest in legal measurements at 90.2% (113 cases), followed by 74.0% (91 cases) in continuous monitoring, and 47.0% (16 cases) in SEGs. Instances exceeding 30% were most prevalent in SEGs at 14.7% (five cases), followed by legal measurements at 5.0% (eight cases), and continuous monitoring at 2.4% (three cases). When examining exposure levels through arithmetic means, crystalline silica was found to be 104.7% higher in SEGs at 0.0088 mg/m³ compared to 0.0043 mg/m³ in continuous monitoring. Coal dust measurements were highest in SEGs at 0.1247 mg/m³, followed by 0.1224 mg/m³ in legal measurements, and 0.0935 mg/m³ in continuous monitoring. Conclusions: Strategies involving SEGs measurement and continuous monitoring can enhance measurement reliability in environments with irregular work processes and frequent fluctuations in working conditions, as observed in coal-fired power plants. These strategies reduce the likelihood of omitting or underestimating processes and enhance measurement accuracy. In particular, a significant reduction in detection limits below the threshold for crystalline silica was observed. Supplementary measurements can identify worker exposure characteristics, uncover potential risks in blind spots of management, and provide a complementary method for legal measurements.