• Journal of the Korean Society of Food Culture
• /
• v.18 no.6
• /
• pp.551-561
• /
• 2003

To determine the conditions of the fermentation and storage for Chonggak kimchi in kimchi refrigerator, prepared Chonggak kimchi took into kimchi refrigerators which were controlled at four different modes of the fermented temperature and time, and fermented and kept for 16 weeks. The pH in Chonggak kimchi fermented at $20^{\circ}C$ for 24 hours/stored at $-1^{\circ}C$ dropped greater than all of kimchi fermented at other combinations, and the changes of pH at any combinations were not greater than those in Baechu kimchi, because pH in Chonggak kimchi did not dropped below 4.5. Acidities in Chonggak kimchi were greatly increased at higher temperature. The acidity in Chonggak kimchi during the first week of fermentation was lower than that in Baechu kimchi and then it was rather higher because of the addition of waxy rice paste. In texture, puncture force of Chonggak kimchi was decreased slowly until 8 weeks of fermentation and then did not changed much and the highest values showed in Chonggak kimchi stored directly at $-1^{\circ}C$ without any fermentation. In sensory evaluation, the scores for the carbonated flavor and the sourness were the highest in Chonggak kimchi fermented at $20^{\circ}C$ for 24 hours/stored at $-1^{\circ}C$, but the lowest in Chonggak kimchi stored directly at $-1^{\circ}C$ without any fermentation because of some undesirable flavors. The lowest hardness showed in Chonggak kimchi fermented at highest temperature and the best hardness was in Chonggak kimchi fermented at $5^{\circ}C$ for 3 days or 6 days/stored at $-1^{\circ}C$. The appearance was the best in Chonggak kimchi fermented at $20^{\circ}C$ for 24 hours/stored at $-1^{\circ}C$ and the worst was in Chonggak kimchi stored directly at $-1^{\circ}C$ without any fermentation. The overall acceptability of Chonggak kimchi fermented at $20^{\circ}C$ for 24 hours/stored at $-1^{\circ}C$ was good after 4 weeks of fermentation, but in Chonggak kimchi fermented at $5^{\circ}C$ for 3 days or 6 days/stored at $-1^{\circ}C$ it was good after 6 weeks. Total microbial counts in most of Chonggak kimchi were reached to a maximum number within 7 days, and then decreased similarly at all modes. Leuconostoc spp. and Lactobacillus spp. increased to maximum number of $1.48{\times}10^9\;and\;5.62{\times}10^9$, respectively, in Chonggak kimchi fermented for 7 days. Yeast counts showed a increasing trend not depends on fermenting temperature and they were lower counts than those in Baechu kimchi. Waxy rice paste which added to Chonggak kimchi resulted in increasement of glucose as a carbon source and stimulated to reproduce the microbes in Chonggak kimchi.

• Journal of Fisheries and Marine Sciences Education
• /
• v.7 no.2
• /
• pp.182-200
• /
• 1995

Thirty two vessels of the Korean purse seiner had been operated in the Western Pacific Ocean for mainly skipjack tuna, Katsuwonus pelmis LINNAEUS and yellowfin tuna, Thunnus albacares BONNATERRE from January to December in 1991. Among them, fourteen vessels were chosen for this research. During the year their daily operated vessels totalled 4,153 vessels, their total casting net were 2,982 times, in caught 1,798 times, and their total catch was 106,300 M/T. We investigate the distribution of their catch by species, by body size, and by surfance water temperature, and also investigate the distribution of their catch by month and section of the sea, where the sections are separated by 30' of longitude and latitude from the monthly operated sea. We summarize these as follows : 1. The rate of catch by species is 75r/o skipjack tunas, 22.3% yellowfin tunas, and 2.7% bigeye and other tunas. 2. Of the caught skipjack tunas, those of weight 2.0~10kg are most and 68%, those of 1.5~8kg are 11.6%, and those of 3.0~8kg are 9.9%. Of the caught yellowfin tunas, those of weight 5~50kg and 10~50kg are most and 23.1%, and 28.3% respectively, those of 20~50kg are 15.8%, weight 30~50kg are 12.5%, and weight 2~50kg are 9.7%. 3. On the distribution of catch by surface water temperature, 49% of catch are taken between $29.0^{\circ}C$ and $29.4^{\circ}C$, 37% are taken between $29.5^{\circ}C$ and $29.9^{\circ}C$, and about 6% are taken between $28.5^{\circ}C$ and $28.9^{\circ}C$, but very little, only about 1% are taken below $28.4^{\circ}C$ and above $30.5^{\circ}C$. 4. On the distribution of catch by month and section of sea, skipjack tunas are most caught 10,618M/T in August and 10,412M/T in September in the section of Lat. $3^{\circ}{\sim}6^{\circ}S$ and Long. $174^{\circ}E{\sim}176^{\circ}W$, caught much 8,825M/I' in June and 8,057M/T in January in section of Lat. $1^{\circ}S{\sim}3^{\circ}N$ and Long. $142^{\circ}{\sim}151^{\circ}$E, but caught very little in May, November and December in the costal area of New Guinea. Yellowfin tunas are mostly caught 4,070M/T in June in the section of Lat. $0^{\circ}{\sim}4^{\circ}$N and Long. $142^{\circ}{\sim}151^{\circ}$E, and caught much over 2,000M/T in February~April and October~December in the section of coastal area and near islands, but caught very little in distant water area.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.2 no.1
• /
• pp.65-73
• /
• 1999

Purpose: Regurgitation, vomiting and feeding intolerance are frequent in the neonates. Esophageal function and gastric peristalsis are not fully developed in the neonates, so we should give attention to reduce the incidence of regurgitation and vomiting after feeding. It is necessary to shorten the gastric emptying by change of feeding types and postprandial postures. Gastric emptying time was measured by ultrasound in the neonates to evaluate the effect of feeding types and postprandial postures. Method: We measured gastric antral cross sectional area along the abdominal aorta at the level of the superior mesenteric artery in longitudinal section at NPO state (4 hours after feeding), 0 and every 30 min. after feeding until the value goes below or back to the NPO state. Fifteen neonates were examined in each breast-fed and formula-fed group in supine position. Eighteen and 15 neonates were examined in supine and prone posture after formula feeding, respectively. We used 5 MHz convex prove with Aloka Echo Camera SSD-650. Result: 1) Gastric emptying time of breast-fed infants was $76.0{\pm}20.02$ min. which was significantly shorter than $96.0{\pm}20.28$ min. of formula-fed infants. 2) Gastric emptying time on postprandial prone posture was $85.0{\pm}22.43$ min. which was not significantly different from $96.0{\pm}20.28$ min. on postprandial supine posture. Conclusion: Breast feeding is strongly recommended to the neonates to shorten gastric emptying time. So we can expect to reduce the incidence of regurgitation, vomiting and feeding intolerance. The postprandial posture depends on the traditional trend which is safe and comfortable to the mothers.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.1 s.25
• /
• pp.29-44
• /
• 1989

A household survey was conducted to determine the utilization rate of medical facilities and to identify the factors related with the utilization in the South District of Taegu from July 3 to July 15, 1988. Study population included 1,723 family members of 431 households which were selected by one-stage simple cluster random sampling. Well trained medical college students interviewed mainly housewives with a structurized questionnaire. Morbidity rate of acute illness during the 2-week period was 101 per 1,000 persons and it was highest in the age group of 9 years below. The rate for chronic illness was 77 per 1,000 persons, increasing with age, low income and medicaid benefit. During the 2-week period, 689 of 1,000 persons utilized the medical facilities. Of the facilities, most number, 294, used hospital and clinic, and the order ran as pharmacy, health center, and herb medical clinic. The utilization rate was higher in the female, 70-year and older group, medicaid group, the lowest income class and self-employed group than other groups. The average number of visits among users of medical facilities during the 2-week period was 3.25. those who visited medical facilities most frequently were females, the 70-year and older group, the lowest income class and blue collar worker group. During one-year period, admission rate of 1,000 persons was 27.6 and that of female was 38.9, higher than that of male. the eldest group had the highest admission rate. Admission rate of medical insurance beneficiaries was twice or higher than non-beneficiaries. The higher the family monthly income, the more frequently they admitted. During one-year period, average admission days of the persons hospitalized were 22.5 days and males were hospitalized longer than females. The groups which were hospitalized longest were those between the ages of 40 and 49, medical insurance beneficiaries, the lowest income group and unemployed group. During one-year period, average admission days of 1,000 persons were 560 days and those of female were 661 days, more than those of male. The guoups which had the longest admission days were those above 70 years of age, the lowest income and unemployed groups. The medical insurance beneficiaries were three times or longer than non-beneficiaries. In logistic regression analysis of utilization of physician significant independent variables were the 9-year and younger group(+), the 70-year and older group(+), acute illness episode(+), chronic illness episode(+), medical insurance beneficiary(+) and white collar workers(-). Acute and chronic illness episode(+), and medical insurance for government employees and private school teacher(-) were significant variables in analysis of utilization of pharmacy. In multiple regression analysis of the number of physician visits, siginificant variables were acute illnes episode(+), chronic illness episode(+), industrial, occupational and regional medical insurance beneficiary(+), white collar workers(-). Acute and chronic illness episode(+), and medical insurance beneficiary(-) were significant variables in analysis of the number of pharmacy visits. In logistic regression analysis of admission event, significant independent variables were the 9-year and younger group(+), the 70-year and older group(+) , chronic illness episode(+), and medical insurance beneficiary(+).

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.25-31
• /
• 1974

1. Various gluing qualities applying Resorcinol Plyophen #6000 were studied on aiming the strength relationships of laminated woods resulted by single species [poplar (Populus deltoides), larch(Larix leptolepis)], mixed species of (poplar and larch), preservatives, treated poplar the scarf joint with mixed species of poplar and larch and the scarf joint treated with preservatives. 1. 1 On the block shear and on the DVL tension test, the mean wood failure ratio showed an excellent value i.e., above 65% and the tangential strength for larch was higher than that of radial, but it was reversed for poplar as shown in Tables 1 and 2. 1. 2 The lamina treated with Na-PCP reduced slightly the strength but the limited strength allowed for manufacturing laminated wood was not influenced by treating Na-PCP as shown in Tables 3 and 4. 1. 3 The safe scarf ratio in the plane scarf joint was above 1/12 for larch and 1/6 for poplar regard less of the chemical treatment or untreatment as shown in Tables. 5, 6, 7 and 8. 2. In the normal and boiled state, the gluing quality of the laminated wood composed of single[poplar (Populus deltoides), larch (Larix leptolepis)] and double species (poplar and larch) glued with Resorcinol Plyophen #6000 were measured as follow, and also represented the delamination of the same laminated wood. 2.1 The normal block shear strength of the straight and curved laminated wood (in life size) were more than three times of the standards adhesion strength. And, the value of the boiled stock was decreased to one half of the standard shear adhesion strength, but it was more than twice the standard strength for the boiled stock. Thus, it was recognized that the water resistance of the Resorcinol Plyophen #6000 was very high as shown in Tables 9 and 10. 2. 2 The delamination ratio of the straight and curved laminated woods in respect of their composition were decraesed, in turn, in the following order i. e., larch, mixed stock (larch+poplar) and poplar. The maximum value represented by the larch was 3.5% but it was below the limited value as shown in Table 11. 3. The various strengthes i.e., compressive, bending and adhesion obtainted by the straight laminaced wood which were constructed by five plies of single and double species of lamina i. e., larch (Larix leptolepis) and poplar (Populus euramericana), glued with urea resin were shown as follows: 3. 1 If desired a higher strength of architectural laminated wood composed of poplar (P) and larch (L), the combination of the laminas should be arranged as follows, L+P+L+P+L as shown in Table 12. 3.2 The strength of laminated wood composed of laminas which included pith and knots was conside rably decreased than that of clear lamina as shown Table 13. 3.3 The shear strength of the FPL block of the straight laminated wood constructed by the same species which were glued with urea adhesives was more than twice the limited adhesion strength, thus it makes possible to use it for interior constructional stock.

• The Korean Journal of Nuclear Medicine
• /
• v.28 no.3
• /
• pp.357-363
• /
• 1994

We evaluated the diagnostic accuracy of $^{99m}Tc$-DISIDA scintigrauhy as a mean of differentiating biliary atresia from neonatal hepatitis. $^{99m}Tc$-DISIDA scintigraphy was visually interpreted by assessing the presence or absence of radioactivity in the intestine or gall bladder. In patients without intestinal radioactivity, we measured the hepatic retention index and the hepatic uptake index. The hepatic retention Index was expressed as the amount of change of liver activity from 5 minutes to 30 minutes postinjection. The hepatic uptake Index was graded visually with 5 minute images using the following scoring scheme : grade 0(normal hepatic uptake), grade 1(decreased hepatic uptake), grade 2(hepatic uptake equal to cardiac uptake), and grade 3(hepatic uptake less than cardiac uptake). Age, total bilirubin, and hepatic uptake index were compared between the biliary atresia and the neonatal hepatitis group, between neonatal hepatitis patients with and without intestinal radioactivity, and between the biliary atresia and neonatal hepatitis patients with absent intestinal radioactivity. The results were as follows ; 1) None of the 30 biliary atresia patients showed intestinal radioactivity, while 31/40 neonatal hepatitis patients showed intestinal radioactivity. The sensitivity, specificity, and accuracy of the presence of intestinal radioactivity ?or the diagnosis of biliary atresia was 100%, 78%, and 87%, respectively. 2) In patients with absent intestinal radioactivity the mean hepatic retention index was $1.5{\pm}0.6$ in the 16 biliary atresia patients, and $1.1{\pm}0.2$ in the 7 neonatal hepatitis patients(p<0.01). All 7 patients with hepatic retention index over 1.5 had biliary atresia. But there were 9 patients with biliary atresia below 1.5. 3) No significant differences were found in age, total bilirubin, or hepatic uptake Index between biliary atresia and neonatal hepatitis patients. However there were differences in age, total bilirubin, and hepatic uptake index between neonatal hepatitis patients with and without intestinal radioactivity. The hepatic uptake index was significantly lower, age was old, and total bilirubin was low in the group with intestinal radioactivity compared the group without intestinal radioactivity(p<0.05). Relation between total bilirubin and the hepatic uptake index was that total bilirubin was relatively low at normal hepatic uptake index in biliary atresia and neonatal hepatitis patients. 4) When hepatic uptake index and hepatic retention index were high it suggest that biliary atresia is more likely, considered relation between hepatic uptake Index and the hepatic retention index. Thus, we conclude that $^{99m}Tc$-DISIDA scintigraphy is accurate in the differential diagnosis of biliary atresia and neonatal hepatitis. In patients without intestinal radioactivity, the hepatic retention index and hepatic uptake index, along with the patient's age and total bilirubin level may supplement diagnosis and improve diagnostic accuracy.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.1
• /
• pp.76-82
• /
• 2010

Experiments were conducted to investigate seed persistence of Chinese milk vetch(CMV) in naturally reseeded rice field in 2007~2009. The seed and pods with seeds were buried in rice field at 0, 5 and 10 cm depths and retrieved from the field at one to three month intervals from July to the following year March and determined change of seed dormancy and viability. In the second experiment, persistence of the CMV seeds in the naturally reseeded rice field at different tillage methods and soil depths were also investigated after rice harvest in autumn. Burial depths and durations affected recovery rate, dormancy and viability of CMV seed. The viability loss was faster and greater in the seed than the pod with seeds and on the soil surface than the 5 or 10 cm burial depths. The recovery rate of CMV seed was decreased starting from one month as seed burial and it was significantly decreased to 52~65% for the seed in September. However, unlike the seed burial, the nearly 100% CMV seeds were recovered for burial as pod with seeds even after four months burial in both 0 and 5 cm depths. However, the recovery rate was sharply declined to below 30% at October in 2007 in both seed and pods with seeds and in the 2008/2009 experiment. the 15~47% of CMV seeds still remained even after October. The CMV had high seed dormancy of 95%, showing only 4~5% germination at the beginning in June but the seed germination increased to 25 to 35% in seed and 55 to 61% in pod with seeds in September due to breakage of hard seed dormancy. The viability loss was faster in the seed than in the pod with seeds regardless of depths of placement in the soil base on decayed seeds. Also the seed placed on the soil surface lost viability faster than the 5~10 burial depths. On the other hand, field observation in the naturally reseeded CMV rice field showed that as many as 917~2,185 CMV seeds $m^2$ were from the 0~15 cm soil depth in the rotary tillage and 250~10,105 CMV seeds in minimum tillage treatmints. The recovered seed germinated 25~33%, 23~43% but still had high percentage of hard seed having 64~72% and 51~77% even after rice harvest in autumn. These results indicate that freshly harvested CMV seeds had high level of primary dormancy and the dormancy was gradually broken in soil with time during rice cultivation periods and appreciable number of CMV seeds remained even 4 month after burial in soil. CMV plant regenerated naturally from the remained seed bank at rice harvest time in autumn. The CMV seedling still emerged even after 2 years of continuous destructive killing of emerged CMV plant by rotary tillage in naturally reseeded CMV plant in rice field, indicating that CMV seeds do persistent as least two years in soil.

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.267-274
• /
• 2017

This paper deals with the natural occurrence of total aflatoxins ($B_1$, $B_2$, $G_1$, and $G_2$) in commercial herbs for food and medicine. To monitor aflatoxins in commercial herbs for food and medicine not included in the specifications of Food Code, a total of 62 samples of 6 different herbs (Bombycis Corpus, Glycyrrhizae Radix et Rhizoma, Menthae Herba, Nelumbinis Semen, Polygalae Radix, Zizyphi Semen) were collected from Yangnyeong market in Seoul, Korea. The samples were treated by the immunoaffinity column clean-up method and quantified by high performance liquid chromatography (HPLC) with on-line post column photochemical derivatization (PHRED) and fluorescence detection (FLD). The analytical method for aflatoxins was validated by accuracy, precision and detection limits. The method showed recovery values in the 86.9~114.0% range and the values of percent coefficient of variaton (CV%) in the 0.9~9.8% range. The limits of detection (LOD) and quantitation (LOQ) in herb were ranged from 0.020 to $0.363{\mu}g/kg$ and from 0.059 to $1.101{\mu}g/kg$, respectively. Of 62 samples analyzed, 6 semens (the original form of 2 Nelumbinis Semen and 2 Zizyphi Semen, the powder of 1 Nelumbinis Semen and 1 Zizyphi Semen) were aflatoxin positive. Aflatoxins $B_1$ or $B_2$ were detected in all positive samples, and the presence of aflatoxins $G_1$ and $G_2$ were not detected. The amount of total aflatoxins ($B_1$, $B_2$, $G_1$, and $G_2$) in the powder and original form of Nelumbinis Semen and Zizyphi Semen were observed around $ND{\sim}21.8{\mu}g/kg$, which is not regulated presently in Korea. The 56 samples presented levels below the limits of detection and quantitation.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.