• Title/Summary/Keyword: below

검색결과 16,774건 처리시간 0.041초

A Study on the Parking Demand of Apartment Complex in Daegu city (대구시 아파트단지의 주차수요에 관한 연구)

  • Park Chan-Don;Ha Jae-Myung
    • Journal of the Korean housing association
    • /
    • 제15권5호
    • /
    • pp.51-58
    • /
    • 2004
  • After 1980's, the ratio of car possessions has been increased rapidly. Nowaday, most large cities have suffered a lot of problems about traffic and car parking. Specially in apartment complexes, they have parking problem which is caused by the parking demand. The ratio of parking demand at multi-family housing sites has been increased significantly, therefore several parking problems have occurred. The goal of this study is to investigate the parking demand per housing unit size of apartment complex in Daegu city. The results of this study is as follows. (1) The parking demand of 60 $m^2$ below sized housing unit is 1.09 car per the unit. (2) The parking demand of 60 $m^2$ over 85 $m^2$ below sized housing unit is 1.31 car per the unit. (3) The parking demand of 85 $m^2$ over 135 $m^2$ below sized housing unit is 1.74 car per the unit. (4) The parking demand of 135 $m^2$ over sized housing unit is 2.10 car per the unit.

NUMERICAL SIMULATION OF THE FLOW CHARACTERISTICS INSIDE A U-TYPE TUBE (U-자형 곡관내의 유동특성에 대한 수치해석적 연구)

  • Koh, D.H.;Kang, D.J.;Song, D.J.
    • Journal of computational fluids engineering
    • /
    • 제14권3호
    • /
    • pp.105-114
    • /
    • 2009
  • A numerical study of the flow characteristics inside a U-type circular tube is carried out in this paper. The numerical simulations carried out by using a Navier-Stokes code which is commercially available. Before detailed numerical simulations, validation of present numerical approach is made by comparing numerical solutions with experimental data. Numerical simulations are performed to study the effect of curvature on the flow characteristics inside a U-type tube. Numerical solutions show that a significant effect on the secondary flow structure in the cross section of the tube, especially in the curved section is shown when the curvature ratio, ratio of curvature to tube diameter, is smaller than about 3.5. As the curvature ratio decreases below 3.5, a counter rotating vortex is found below the primary vortex in the cross section of the tube. Another dramatic change of the flow structure is the formation of streamwise separation zone when the curvature ratio is decreased below 1.25.

Double-Diffusive Convection Due to Heating from Below in a Rotating Cylindrical Cavity (회전하는 원통형밀폐용기내의 아랫면가열에 의한 이중확산대류에 관한 실험적 연구)

  • 강신형;이태홍;이진호
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • 제19권7호
    • /
    • pp.1731-1740
    • /
    • 1995
  • Experimental investigations have been made to study the double-diffusive nature of convection of an initially stratified salt-water solution due to heating from below in a rotating cylindrical cavity. The objective is to examine the flow phenomena and the heat transfer characteristics according to the changes in temperature gradient, concentration gradient and rotating velocity of cavity. Thermal and solutal boundary conditions at side wall are adiabatic and impermeable, respectively. The top and bottom plate are maintained each at constant temperature and concentration. The cavity is put into a state of solid body rotation. Like the stationary case, the types of initially-formed flow pattern are classified into three regimes depending on the effective Rayleigh number and Taylor number; stagnant flow regime, single mixed-layer flow regime and successively formed multi-mixed layer flow regime. At the same effective Rayleigh number, the number of initially-formed mixed layer and its growth rate decrease as the effect of rotation increases. The temperature and concentration profiles are both uniform in each layer due to convective mixing in the layered-flow regime, but look both liner in stagnant flow regime and single mixed-layer flow regime. At the interface between adjacent layers, the temperature changes smoothly but the concentration changes rapidly.

A study on the washing efficiency with various washing conditions - Focus on detergent concentration and temperature - (인공오염포의 세탁조건에 따른 세척효율에 관한 연구 - 세제농도와 용수온도를 중심으로 -)

  • Choi, In-Ryu;Kim, Taemi
    • The Research Journal of the Costume Culture
    • /
    • 제22권3호
    • /
    • pp.503-510
    • /
    • 2014
  • Nowdays, costumer's washing behavior were often times for remove to light-duty dirt. The purpose of this study is to provide the most effective washing conditions of detergent concentration and temperature conditions for help save energy and water resources required to the washing process. Washing conditions were as follows: 2 kinds of detergents and 4 types of artificially soiled fabrics were used. Detergent concentration was 0%, -10%, and -20% below the recommended conc. of manufacturer's standard. Temperature of bath was $20^{\circ}C$ and $40^{\circ}C$. The results of this study were as follows: First, washing performances of all kind of artificially soiled fabric improved as the temperature of bath at $40^{\circ}C$. Second, the test was conducted under the condition of decreasing respectively -10% and -20% below of the recommended concentration of manufacturer's standard detergent. The average of washing efficiency was not considerably affected by the reduction of 10% below of manufacturer's standard. Third, in case of the water temperature were $20^{\circ}C$, polyester/cotton blended fiber were higher degree of washing efficiency than cotton fiber.

The Effect of Low-amplitude Cycles in Flight-simulation Loading (비행하중에서 피로균열진전에 미치는 미소하중의 영향)

  • Shim, Dong-Suk;Kim, Jung-Kyu
    • Proceedings of the KSME Conference
    • /
    • 대한기계학회 2003년도 추계학술대회
    • /
    • pp.1045-1050
    • /
    • 2003
  • In this study, to investigate the effects of omitting low-amplitude cycles from a flight-simulation loading, crack growth tests are conducted on 2124-T851 aluminum alloy specimens. Three test spectra are generated by omitting small load ranges as counted by the rain-flow count method. The crack growth test results are compared with the data obtained from the flight-simulation loading. The experimental results show that omission of the load ranges below 5% of the maximum load does not significantly affect crack growth behavior, because these are below the initial stress intensity factor range. However, in the case of omitting the load ranges below 15% of the maximum load, crack growth rates decrease, and therefore crack growth curve deviates from the crack growth data under the flight-simulation loading. To optimize the load range that can be omitted, crack growth curves are simulated by the stochastic crack growth model. The prediction shows that the omission level can be extended to 8% of the maximum load and test time can be reduced by 59%.

  • PDF

Dependence of High Affinity Binding of Epidermal Growth Factor on Receptor Cytoplasmic Domain (Receptor Cytoplasmic 영역에 의존하는 EGF의 고친화성 결합)

  • 강용호
    • KSBB Journal
    • /
    • 제7권3호
    • /
    • pp.201-208
    • /
    • 1992
  • Cell surface binding of epidermal growth factor(EGF) to EGF receptors was studied for a series of site-directed receptor mutants transfected into B82 mouse fibroblasts. Scatchard plots for truncation mutant receptors significantly lost nonlinearity for truncations below residue 1022. Transient plots of dissociation kinetics exhibited biphasic behavior for all receptor types, but the fraction of receptor in slow-dissociating form was reduced by an order of magnitude for the truncation mutants below residue 1022. Comparison of dissociation kinetics between control cells and cells treated with Triton X-100 revealed no significant variation for the slow-dissociating receptor form, but a noticeable variation was observed for the fast-dissociating receptor form when EGF receptors were truncated below residue 991. These results suggest that high affinity of EGF binding at cell surface depend on the EGF receptor cytoplasmic region.

  • PDF

Distribution, Size and Development Phases of Knots for Pinus sylvestris L. var. mongolica Litvin in Northeast China

  • Jia, Weiwei;Li, Fengri
    • Journal of Korean Society of Forest Science
    • /
    • 제94권5호통권162호
    • /
    • pp.313-320
    • /
    • 2005
  • This study was performed in a 38-year-old Mongolian pine (Pinus sylvestris L. var. mongolica Litvin) plantation in northeast China. Data were collected from 5 sample trees with different canopy position ranging in DBH from 14.6 cm to 23.8 cm. Sawn speciments that included the biggest knot were taken from the stem below the living crown. Number and distribution of knots per whorl below the living crown were studied by relative height below living crown (RHBC). A linear model expressed as function of whorl age (AGE), whorl height ($H_k$) and the stem diameter at which the whorl was located ($D_k$) was developed to predict the knot diameter and angle. The number of annual rings in four periods and the width of respective zone alone stem were used as dependant variables to analyze the knot develop phases. In average, the number of years from branch birth to ceased forming rings was 7.8, the branches remained alive for 4.2 years without forming annual rings, and branches were occluded 14.4 years after their death. These results can provide abundance branch and knot information so as to describe current and past tree growth dynamic of Mongolian pine plantation.

The Effects of leg length difference on Low Back Pain and joint stiffness (하지길이 차이가 요통과 관절경직에 미치는 영향)

  • Kim Dong-Hyun;Kim Suk-Bum;Baek Su-Jeong;Nam Tae-Ho;Kim Jin-Sang
    • The Journal of Korean Physical Therapy
    • /
    • 제14권4호
    • /
    • pp.55-63
    • /
    • 2002
  • Human body balances right and left leg centering around pelvis and spine. Therefore, imbalance of lower extremity means disequilibrium of the body. The difference of lower extremity length can cause a number of clinic symptoms including scoliosis, low back pain, sacroiliac pain, and sports injury. In this study, we tried to analyze low back pain and joint stiffness resulting from the difference of lower extremity length. The subjects were 80 male students who are 20-25 years old. The results of this study were as following: 1. Low back pain depending on the difference of lower extremity length One group which the difference of lower extremity length is above 12mm showed average different length as 18.0mm, the other group which one is below 12mm showed as 6.3mm. A group of above 12mm had more severe low back pain than a group of below 12mm. 2. Joint stiffness depending on the difference of lower extremity length A group of above 12mm had more severe joint stiffness than a group of below 12mm.

  • PDF

Analysis of Basic Competency for Basic Mathematics and Background by gender (남녀 학생의 수학 기초학력과 배경 변인의 분석)

  • Kim, Sun-Hee
    • The Mathematical Education
    • /
    • 제46권1호
    • /
    • pp.33-52
    • /
    • 2007
  • This study is based on the grade 3 National Diagnostic Assessment of Basic Competency(NDABC) in 2005. The purpose of this study is to analyze the results of NDABC by students' gender. It was 19,257 grade 3 students that participated in this study. The average scores are 89.41 and 88.34 for each male and female. The percentage of Below-Basic level for male students is 4.6% and for female 5.6%. The percentage of female students at Below-Basic level is increasing for 3 years. In particular, the percentage of females at Below-Basic level is higher than that of males in the content of measurement, the cognitive domain of reasoning and problem solving, and the situation of real life. The item difficulty for males is lower in fraction, polygon, and right triangle than for females. But female students need to improve the space sense and the problem solving ability in real life. As for the background of students, males think that mathematics is exciting and not difficult in comparison with what females think. And parents of mates are more concerned about children's learning than those of females.

  • PDF

High Performance Poly-Si TFT (${\mu}>290cm^2/Vsec$) Direct Fabricated on Plastic Substrate below $170^{\circ}C$

  • Kwon, Jang-Yeon;Kim, Do-Young;Jung, Ji-Sim;Kim, Jong-Man;Lim, Hyuck;Park, Kyung-Bae;Cho, Hans-S;Zhang, Xiaoxin;Yin, Huaxiang;Xianyu, Wenxu;Noguchi, Takashi
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
    • /
    • pp.149-152
    • /
    • 2005
  • We present the characterization of poly-Si TFT fabricated below on Plastic Substrate below $170^{\circ}C$ on plastic substrate using excimer laser crystallization of Xe sputtered Si films. Gate insulator with a breakdown field exceeding 8 MV/cm was deposited by using inductively coupled plasma CVD. Finally, we successfully fabricate TFT with a electron field-effect mobility value greater than $290\;cm^2/Vsec$.

  • PDF