• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.210-210
• /
• 2011

하도에서의 하천정비 및 안전하도 유지를 위해서는 하상변동 특성을 면밀히 파악하는 것이 중요하다. 상류유역에서 하천으로 내려온 유사(流砂)는 하천의 흐름과 생태환경에 영향을 미친다. 이중 하천흐름은 사련(ripple)이나 사구(dune)의 형성에 영향을 미쳐, 하천의 지형변동인 사주에 영향을 주고 하천 식생의 성장과 발달에 직 간접적으로 간섭하게 된다. 또한, 교량, 취수장의 취수장애, 호안블럭의 침식 등과 같이 수리구조물의 안정에 영향을 주게 된다. 하천의 유사량 변화에 따라 생태계의 서식환경이 변하게 된다. 또한, 저수지에서 유입 유사량의 변화에 따라 저수지의 용적이 변하게 되어 댐의 설계 및 운영에 많은 영향을 끼치게 되며 특히 저수지 탁수관리에 매우 중요하다. 본 연구에는 4개 대권역의 주요지천 및 댐 직 하류하천 지점 중 적정구간을 선택하여 하상재료조사를 실시하였다. 하상재료 조사는 하도를 구성하는 모래와 자갈의 물리적 성질 중 유사의 이동량 및 하상의 변동, 하도설계 등에 관련 있는 입도분포, 비중 등을 측정하며 자갈하천은 표층 하상재료를 조사하고, 모래 재료는 체분석, 실트이하 재료는 BW관 등을 이용한 침강속도 분석을 실시한다. 주요지점의 중 남강의 안의 수위 우량관측소 지점의 상 하류 2km 구간을 200m마다 21개 지점의 하상재료를 채취하여 입도분석을 실시하였다. 분석결과 남강 안의지점의 표층은 여느 하천과 마찬가지로 상 하류 굵은 자갈로 구성되어 있으며 전형적인 자갈하천의 특성을 보었다. 상류200m(2000m)에서는 최소 50mm(10mm), 최대 440mm(75mm), 평균입경은 174mm(34.7mm) 이었고, 하류200m(2000m)에서의 표층입경은 최소 8mm(25mm), 최대 50mm(110mm)이며 평균입경은 27.3mm(62.5mm)로 구성되어 있었다. 전체적으로 상류지역의 입경이 하류지역보다 큰 것을 관찰할 수 있었으며 유수 흐름의 일시적인 저항이 발생하는 안의교 지점의 자갈 입경이 인근 부근보다 큰 것을 확인할 수 있었다.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.39-47
• /
• 2018

According to Vietnam government establishes additional coal-fired power plants to secure generation capacity, emission of ashes is accelerating and processing them is urgent issue. This study targeted utilize fly ashes that occurred in circulating fluidized bed combusion (CFBC) power plant to use ground solidification materials. CFBC fly ashes are used to make solidification with ground granulated blast furnace slag (GGBFS), gypsum and cement. Then produced specimens by mixing with soft ground soil to confirm mixing effect of fly ash in solidification. As a result it was possible to find mixture design that is satisfied 3 MPa compressive strength in age 28 days and reduce weight loss rate over 50% in acid immersion test than plain specimens that using only ordinary portland cement.

• Journal of Wetlands Research
• /
• v.14 no.2
• /
• pp.277-288
• /
• 2012

Estuary is unique habitat ground under substantial changes of water quality, river side, bed material, and micro topography. Construction of SinGok underwater weir with excessive dredging for downstream of weir has changed hydraulic conditions of Han River. This study investigates spatial changes of estuary and expansion process of vegetation on sandbar for JangHang estuary in Han River through analysis of physical and ecological characteristics. As a result of investigation, we found that area of sandbar in JangHang estuary is expanded six times compared between 1985 and 2006, and area of Phragmites australis is gradually decreased while area of Salix subfragilis Anderson. is increased. Also the analysis result of soil layer shows that the Jang-Hang wetlands are created by effect from river, and woody plants are settled from middle part of wetlands, then spread to upper and lower part of wetlands.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.841-845
• /
• 2007

낙차공(drop structure)은 치수목적의 하천정비를 위한 주요 수공구조물이다. 하지만 국내외적으로 환경을 고려한 하천공법이 요구되면서 고낙차로 인해 발생하는 수중생물의 단절은 기존 낙차공의 큰 문제로 대두되었다. 이에 기존 고낙차를 이용한 낙차공 보다는 완만한 경사를 가지는 낙차공을 설치함으로써 기존 낙차공에 의해 단절되었던 어류의 이동통로로서의 역할과 주변 경관개선을 위해 설치하고 있는 구조물이 필요하였다. 본 연구는 위와 같은 필요성에서 시작되었으며 완경사 낙차공을 경사형 낙차공이라 정의하고 조건에 따른 흐름특성을 수리실험을 통해 분석하였다. 연구내용은 경사형 낙차공의 경사조건과 하상재료의 입경에 따라 발생하는 에너지 소산에 따른 효율과 구조물 하류부 도수현상에 대한 것으로 이를 통해 경사형 낙차공 조건에 따른 흐름특성을 파악하였다. 수리실험은 폭 0.6m, 길이 20.0m 인 가변경사수로에서 수행하였으며, 하상재료는 크기에 따라 2가지 입경(16mm, 25mm)의 재료를 선정하였고, 구조물 경사에 대해 각각 1V:2H, 1V:3H, 1V:4H, 1V:6H의 경사도를 가지는 모형을 제작하여 실험을 수행하였다. 유량조건 및 도수발생위치는 유입부 수위에 따라 단계별로 4가지 수위조건을 만족시키는 유량을 통수하였고, 하류부 수위를 조절하여 도수위치를 조절하여 유입부(1), 낙차공부(5), 사류부(1), 하류부(1)에 대하여 총 8개 지점을 선정하여 수위$(y_n)$ 및 유속(V), 도수길이(Lr), 도수발생거리(Lj) 등을 측정하였다.

• Solar Energy
• /
• v.18 no.3
• /
• pp.197-203
• /
• 1998

A 5 ton/day pilot scale two-phase anaerobic digester was constructed and tasted to treat Korean food wastes in Anyang city. The process was developed based on 3 years of lab-scale experimental results on am optimim treatment method for the recovery of biogas and humus. Problems related to food waste are ever Increasing quantity among municipal solid wastes(MSW) and high moisture and salt contents. Thus our food waste produces large amounts of leachate and bed odor in landfill sites which are being exhausted. The easily degradable presorted food waste was efficiently treated in the two-phase anaerobic digestion process. The waste contained in plastic bags was shredded and then screened for the removal of inert material such as fabrics and plastics, and subsequently put into the two-stage reactors. Heavy and light inerts such as bones, shells, spoons and plastic pieces were again removed by gravity differences. The residual organic component was effectively hydrolyzed and acidified in the first reactor with 5 days space time at pH of about 6.5. The second, methanization reactor part of which is filled with anaerobic fillters, converted the acids into methane with pH between 7.4 to 7.8. The space time for the second reactor was 15 days. The effluent from the second reactor was recycled to the first reactor to provide alkalinities. The process showed stable steady state operation with the maximum organic rate of 7.9 $kgVS/m^3day$ and the volatile solid reduction efficiency of about 70%. The total of 3.6 tons presorted MSW containing 2.9 tons of food organic was treated to produce about $230m^3$ of biogas with 70% of methane and 80kg humus. This process is extended to full scale treating 15 tons of food waste a day in Euiwang city and the produced biogas is utilized for the heating/cooling of adjacent buildings.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.2
• /
• pp.254-269
• /
• 2004

Polysilicato-iron coagulant (PSI) is receiving attention in Japan as a substitute for aluminum-based coagulants. In the first part of this article, coagulation, sedimentation and filtration experiments were carried out using kaolin clay particles as the turbidizing material and four types of PSI with various molar ratios of polysilicic acid to ferric chloride (Si/Fe ratio). Results demonstrate that use of a PSI with a high Si/Fe ratio can cause a more dramatic decrease in treated water turbidity but a higher suction time ratio (STR) than when PACl is used. However, optimization by increasing the rapid agitation strength GR is found to greatly improve the STR. In addition, the series of filtration experiments verified that optimization of GR is greatly effective in controlling rapid increases in filter head loss, and also formation of a thin aging layer in the upper part of the filter bed by slow-start filtration is effective in improving filtered water turbidity over the entire filtration process. The second part of this article describes two innovative filtration techniques to increase the particle separation efficiency; (1) coagulant-coated filter medium by enhancing the electrical potential of the surface of the filter medium, and (2) coagulant dosing in influent by controlling the electrical potential of particles entering the filter layer. From the results of the various filtration experiments using a pilot plant, these two techniques were found to be very effective to reduce the effluent water turbidity from the start to the end of a filter run. Moreover, in the filtration experiments using these two methods simultaneously, higher removal efficiency of approximately 3-log (99.7%) was realized, resulting that the finished water turbidity was accordingly reduced to 0.004mg/L.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.5
• /
• pp.359-364
• /
• 2012

In order to prevent the decrease in well efficiencies due to friction in the axial flow in long, large-diameter laterals, a multi-diameter lateral was devised and tested through lab-scale sand-box experiments to assess its performance. In the experiment, three different production rates were applied over the multi-diameter and the three single-diameter laterals to obtain the hydraulic head distributions for each, which was used to assess the performance of the laterals. Results elucidated that the multi-diameter lateral reduced the material cost by more than a third, in comparison to the single-diameter lateral, while maintaining the production rate at higher than 93%, proving its superiority. Furthermore, results indicated that exit velocities exceeding 0.8 m/sec in horizontal wells tended to distort the hydraulic head distribution near the exit, providing evidence of its inefficiency.

• Korean Journal of Health Education and Promotion
• /
• v.19 no.1
• /
• pp.109-132
• /
• 2002

The study surveyed 1,127 mothers whose children aged 3 to 5 went to 25 randomly selected kindergartens, which were located in Busan Metropolitan City and the adjacent Gimhae City, and analyzed the preventive health behaviors on their children and the condition of home health education on their children. As the compulsory kindergarten education will e to be implemented within 4 years, this study aimed to draw up the rudimentary material for health education at kindergartens. The study results are summed up as follows: 1. Mothers' awareness of health-related attitude and behavioral level for their children at kindergarten: 1) The general health condition of the children, which mothers are aware of, was that they were healthy on the whole. As their children becomes older, the income level of the parents is lower, and mothers have lower level of educational standard, the health condition of the children was found a little lower. 2) In terms of mothers' recognition of the practice level of preventive health behaviors, the items such as going to bed regularly, washing hands and feet well, and having meals regularly were high in the practice level, while exercise and tooth-brushing were not practiced well. 2. The condition of mothers' health education of their children: 1) It was found that washing hands and feet, restriction of overeating and preference for specific kinds of food, guidance on regular sleep and regular meal were practiced well among items of home health education targeting kindergarten children. 2) Mothers have obtained information on family health from printed matter such as newspaper or magazine rather than the visual media. 3) From the cross analysis of mothers' health education on children and children's health behaviors, as the standard of education of mothers was higher, so was the level of preventive health behaviors of children. 3. From the result of multi regression analysis of the factors influencing the preventive hygiene of kindergarten children, it was found that as the home health education level was higher, so was the health behavior of children. On the other hand, as the mothers were older, the health behavior of children became lower.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.27-34
• /
• 2020

In the industry, due to the carbon dioxide gas produced during cement production is increasing, research on recycling by-products has been actively conducted. In the industrial by-products, the high calcium fly ash(HCFA) produced by the blast-furnace in the circulating fluidized bed combustion method has a high ratio of CaO and CaSO4. In view of this, the purpose of this is to use high calcium fly ash(HCFA) as a stimulant in blast furnace slag powder and use it as a cement substitute. As a result, it is judged that the substitution ratio of HCFA should be 15% or less. In addition, although durability and strength are relatively lower than of OPC, it is considered that it can be utilized as an environmentally building material.

• Clean Technology
• /
• v.2 no.2
• /
• pp.100-125
• /
• 1996

After recycle of spent materials has been optimised, there remains a proportion of waste which must be dealt with in the most environmentally friendly manner available. For materials such as municipal waste, clinical waste, toxic waste and special wastes such as tyres, incineration is often the most appropriate technology. The study of incineration must take a process system approach covering the following aspects: ${\bullet}$ Collection and blending of waste, ${\bullet}$ The two stage combustion process, ${\bullet}$ Quenching, scrubbing and polishing of the flue gases, ${\bullet}$ Dispersion of the flue gases and disposal of any solid or liquid effluent. The design of furnaces for the burning of a bed of material is being hampered by lack of an accurate mathematical model of the process and some semi-empirical correlations have to be used at present. The prediction of the incinerator gas phase flow is in a more advanced stage of development using computational fluid dynamics (CFD) analysis, although further validation data is still required. Unfortunately, it is not possible to scale down many aspects of waste incineration and tests on full scale incinerators are essencial. Thanks to a close relationship between SUWIC and Sheffield Heat&Power Ltd., an extended research programme has been carried out ar the Bernard Road Incinerator plant in Sheffield. This plant consists of two Municipal(35 MW) and two Clinical (5MW) Waste Incinerators which provide district heating for a large part of city. The heat is distributed as hot water to commercial, domestic ( >5000 dwelling) and industrial buildings through 30km of 14" pipes plus a smaller pipe distribution system. To improve the economics, a 6 MW generator is now being added to the system.