• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.382-389
• /
• 2011

BACKGROUND: Light-emitting diodes (LEDs) with lower electric cost and the specific wavelength have been considering as a novel light source for plant production in greenhouse conditions as well as in a closed culture system. Supplementary lighting for day-length extension was considered as light intensity, light quality, and/or photoperiod control on plant growth and development. Effects of supplementary blue or red LED radiation with lower light intensity on growth of Ageratum (Ageratum houstonianum Mill., cv. Blue Field), African marigold (Tagetes erecta L., cv. Orange Boy), and Salvia (Salvia splendens F. Sello ex Ruem & Schult., cv. Red Vista) were discussed during sunrise and sunset twilight in the experiment. METHODS AND RESULTS: Supplementary lighting by blue and red LEDs for 30 (Treatment B30; R30) or 60 (Treatment B60; R60) min. per day were established in greenhouse conditions. Photosynthetic photon flux for supplementary radiation was kept at $15{\mu}mol\;m^{-2}\;s^{-1}$ on the culture bed. Natural condition without supplementary light was considered as a control. The highest shoot and root dry weights were shown in African marigold exposed by red light for 60 min. per day. Supplementary blue and red lighting regardless of the radiation time significantly stimulated development of lateral branches in African marigold. Stem growth in Ageratum and Salvia seedlings was significantly promoted by red radiation as well as natural light. CONCLUSIONS: Extending of the radiation time at sunrise and sunset twilight using LEDs stimulated reproductive growth of flowering plant species. Different characteristics on growth under supplementary blue or red lighting conditions were also observed in the seedlings during supplementary radiation.

• Korean Journal of Food Science and Technology
• /
• v.10 no.4
• /
• pp.398-403
• /
• 1978

Squid was dried on the fluidized-bed in the drying chamber filled with solid particles which were also fluidized with hot-air, and effects of the fluidized particles, the squid's height from the grid and the drying temperature on the drying rate and quality of the squid were observed The mechanism of moisture transfer during the falling rate period was also derived. 1. Sodium chloride was found to be the most suitable fluidized particles and at an air velocity of 3.8 m/sec, optimal fluidization state of this particle was obtained. 2. Uniform profiles of temperature were obtained at a point 4 cm above the grid and the location of squid on the fluidized-bed observed to be suitable when it was 4 cm above the grid. 3. At an air velocity of 3.8 m/sec and when the location height of the squid on the fluidized-bed was 4 cm, the optimal temperature for the drying time which is required to reduce the moisture from 80.8% to 18-22% was 8.5 hours. 4. Drying data followed the empirical equation of unsteady state diffusion $log\;(\frac{W-We}{Wc-We})=-m{\theta}$ in the region of the moisture contents measured and the drying constant (m) was calculated as $0.32hr^{-1}$. These results suggested that the migration of moisture during the falling rate period is due to a diffusion type mechanism. 5. The short constant rate period was observed in the early stage and thereafter, drying was controlled by the falling rate period, and the time ratio of the fluidized bed drying to the through circulation drying for reducing the squid's moisture contents to the same level at the same drying temperature was 1 : 1.4 6. Comparisons of fluidized-bed dried squid and sun dried squid in sale showed that there was no significant change in qualities such as external appearance and hydrogen ion concentration of dry product.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.642-650
• /
• 2020

In general, the circulation path of the fluidized particles in a CFB (Circulating Fluidized Bed) boiler is such that the particles entrained from a combustor are collected by a cyclone and recirculated to the combustor via a sealpot which is one of non-mechanical valves. However, when a fluidized bed heat exchanger (FBHE) is installed to additionally absorb heat from the fluidized particles, some particles in the sealpot pass through the FBHE and then flow into the combustor. At this time, in the FBHE operated in the bubbling fluidization regime, if the heat flow is not evenly distributed by poor mixing of the hot particles (800~950 ℃) flowing in from the sealpot, the heat exchanger tubes would be locally heated and then damaged, and the agglomeration of particles could also occur by formation of hot spot. This may affect the stable operation of the circulating fluidized bed. In this study, the unevenness of heat flow arising from structural problems of the FBHE of the domestic D-CFB boiler was found through the operating data analysis and the CPFD (Computational Particle Fluid Dynamics) simulation using Barracuda VR. Actually, the temperature of the heat exchanger tubes in the FBHE showed the closest correlation with the change in particle temperature of the sealpot. It was also found that the non-uniformity of the heat flow was caused by channeling of hot particles flowing in from the sealpot. However, it was difficult to eliminate the non-uniformity even though the fluidizing velocity of the FBHE was increased enough to fluidize hot particles vigorously. When the premixing zone for hot particles flowing in from the sealpot is installed and when the structure is changed through the symmetrization of the FBHE discharge line for particles reflowing into the combustor, the particle mixing and the uniformity of heat flow were found to be increased considerably. Therefore, it could be suggested that the structural modification of the FBHE, related to premixing and symmetric flow of hot particles, is an alternative to reduce the non-uniformity of the heat flow and to minimize the poor particle mixing.

• Archives of Pharmacal Research
• /
• v.10 no.1
• /
• pp.42-49
• /
• 1987

This study is to evaluate the potential use of aclarubicin-loaded gelatin microspheres as an intravascular biodegradable drug delivery system for the regional cancer therapy. The diameter of the microspheres prepared by water in oil emulsion polymerization could be controlled by adjusting the stirring rate in the range of 10-50 $\mu$m : D(in $\mu$m) = -73.8 log (rpm) + 262.7. The addition of proteolytic enzyme increased the in vitro aclarubicin release but it did not change the amount of the initial burst release which reached about 45%. Microspheres injected intravenously into the mouse tail vein embolized only to the lung when observed by fluorescence microscopy. From histological examination following injection of gelatin microspheres into mouse femoral muscle, mild inflammation was observed from the appearance of neutrophils after 2 days and rapid repair process was confirmed thereafter. Biodegradation process of gelatin microspheres lodged on the pulmonary capillary bed was followed up by microscopic observation; degradation was taking place by about 36 hrs, followed by severe damage on the spheerical shape and microspheres was no longer found 10 days after injection.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.959-964
• /
• 2005

본 연구에서는 수리실험을 통해 단일 돌출수제 설치에 따른 흐름중심선과 수제 하류부의 흐름분리영역의 특성을 파악하였다. 흐름중심선은 최대유속이 발생되는 유선을 의미하며, 수제 설치로 인한 수제 선단부 흐름분리 현상은 흐름 중심선의 형태를 변화시킨다. 이러한 주요 특성들은 수제길이 및 투과율과 밀접한 연관이 있으며, 제방의 침식방지 및 수로의 흐름제어라는 수제설치의 목적을 고려해 볼 때 매우 중요한 변수라 할 수 있다. 이에 본 연구에서는 수리실험을 통해 단일 돌출수제의 길이 및 투과율 변화에 따른 수제 주변의 흐름장을 LSPIV(Large Scale Particle Image Velocimetry)를 이용하여 측정하고, 수제길이 및 투과율에 따른 흐름 중심선과 흐름분리 영역의 특성을 파악하였다. 실험결과, 흐름중앙선과 흐름분리영역의 폭은 Fr 수에 따라 큰 변화를 보이지 않으나 수제의 길이 및 투과율에 따라 변화하는 것으로 나타났으며, 이러한 변화 경향은 흐름중앙선과 흐름분리영역이 유사한 것으로 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1041-1046
• /
• 2005

본 연구에서는 수리실험을 통해 단일 돌출수제 설치에 따른 흐름중심선과 수제 하류부의 흐름분리영역의 특성을 파악하였다. 흐름중심선은 최대유속이 발생되는 유선을 의미하며, 수제 설치로 인한 수제 선단부 흐름분리 현상은 흐름 중심선의 형태를 변화시킨다. 이러한 주요 특성들은 수제길이 및 투과율과 밀접한 연관이 있으며, 제방의 침식방지 및 수로의 흐름제어라는 수제설치의 목적을 고려해 볼 때 매우 중요한 변수라 할 수 있다. 이에 본 연구에서는 수리실험을 통해 단일 돌출수제의 길이 및 투과율 변화에 따른 수제 주변의 흐름장을 LSPIV(Large Scale Particle Image Velocimetry)를 이용하여 측정하고, 수제길이 및 투과율에 따른 흐름 중심선과 흐름분리 영역의 특성을 파악하였다. 실험결과 흐름중앙선과 흐름분리영역의 폭은 Fr 수에 따라 큰 변화를 보이지 않으나 수제의 길이 및 투과율에 따라 변화하는 것으로 나타났으며, 이러한 변화 경향은 흐름중앙선과 흐름분리영역이 유사한 것으로 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1992.07a
• /
• pp.366-374
• /
• 1992

1980년 금강유역에 축조된 대청 다목적댐에 의한 하류의 하상변동을 실측자료를 이용하여 조사,분석하고 미국 공병단에서 개발된 HEC-6 모형을 이용하여 장래의 하상변동을 예측하였다. 모형의 적용구간은 대청조정지댐에서 부여까지 약 78km이며, 적용 기간은 1980~1988이며, 장래의 하상변동 예측결과에 따르면, 조정지댐~마어구 수위표 구간은 하상이 저하될 것이 예상되며, 공주 수위표 하류는 하상이 상승될 것으로 예상된다. 특히 규암 수위표 상류 3~15km 구간은 하상이 1~2m 이상 상승될 것으로 나타나고 있다. 이 구간은 현재도 하상상승에 따른 취수장 취수구의 매몰 등의 문제점이 발생하고 있는 바 이에 대한 보다 자세한 조사와 분석 및 대책마련을 위한 조치들이 시행되어야 할 것이다.

• Solar Energy
• /
• v.12 no.1
• /
• pp.34-39
• /
• 1992

The present study has carried out thermal performance evaluation of air systems for space heating in Daejeon by the f-chart method. The various effects with the change in air flow rate, number of glazings, storage capacity of pebble bed, and coating materials of absorber plate are analyzed with regard to the effectiveness of air systems for space heating. A comparison is also made with liquid systems under the same operating conditions.

• Economic and Environmental Geology
• /
• v.27 no.3
• /
• pp.289-294
• /
• 1994

This paper describes an effective utilization method of well logging data and boring cores for understanding the geology of Keoje-do area. Six holes were drilled in 1988-1989, and all rock cores were recovered. Nevertheless, seven kinds of logs were carried out in each borehole. The geologic situations of the drilling sites are accurately evaluated from a comparison between core descriptions and well logging data. Porosities and clay contents of sedimentary rocks can be calculated using the data of density and gamma-ray logs. Fractured zones are easily detected from the change in inside diameter of borehole by caliper log. Sonic, density and gamma-ray logging data clearly indicate alternated and dyke zones; the former can be detceted from an acoustic wave attenuation and a decline of compaction by sonic and density logs, the latter can be detected from the amount of potassium contents of bed rock and dyke by gamma-ray log.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.239-242
• /
• 2000

Symbiotic evolutionary algorithms are stochastic search algorithms that imitate the biological coevolution process through symbiotic interactions. In the algorithms, the fitness evaluation of an individual requires first selecting symbiotic partners of the individual. The symbiotic partner effects the change of individual's fitness and search direction. In this study we are to analyze how much partnering strategies can influence the performance of the algorithms. For this goal extensive experiments are carried out to compare the performance of partnering strategies. The NKC model and the binary string covering problem are used as the test-bed problems. The experimental results indicate that there does not exist statistically significant difference in their performance.