• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.58-65
• /
• 2008

집성재의 구조부재로서의 이용에 있어서는 접합철물(connector)과 파스너(fastener)에 의한 접합이 대부분을 차지하고 있다. 이들 접합부의 역학적 거동은 파스너의 지압과 부재의 전단현상으로 설명할 수 있다. 집성재 내의 층재 구성상태에 따른 전단성능, 2면전단 핀접합부의 인발에 의한 전단성능, 실대 기둥-보 2면전단 핀접합부의 모멘트 저항성능을 검토하였다. 집성접착된 부위의 경우, 두 층재간의 보완작용에 의해 밀도 및 전단강도에 있어서도 적층효과를 발휘하였다. 소시험편의 전단강도를 이용한 핀접합부의 2면전단강도와 모멘트 저항성능을 예측할 경우 다소의 보정이 필요할 것으로 판단되었다. 기둥-보 접합부의 모멘트저항성능 예측은 소시험편 전단강도의 10%를 저감하여 이용하면 안전하게 예측가능한 것으로 판명되었다.

• Coupled systems mechanics
• /
• 제11권5호
• /
• pp.439-458
• /
• 2022

Over-coating is one of the most popular engineering practices to strengthen Reinforced Concrete (RC) structures, due to the relative quickness and ease of construction. It consists of an external coat bonded to the outer surface of the structural RC element, either by the use of chemical adhesives, mechanical anchor bolts or simply mortar injection. In contrast to these constructive advantages, the numerical estimation of the bearing capacity of the strengthened reinforced concrete element is still complicated, not only for the complexity of modelling a flexible membrane or plate attached to a quasi-rigid solid, but also for the difficulties that raise of simulating any potential delamination between both materials. For these reasons, the standard engineering calculations used in the practice remain very approximated and clumsy. In this work, we propose the formulation of a new 2D solid-layer finite element capable to link a solid body with a flexible thin layer, as it were the "skin" of the body, allowing the potential delamination between both materials. In numerical terms, this "skin" element is intended to work as a transitional region between a solid body (modelled with a classical formulation of a standard quadrilateral four-nodes element) and a flexible coat layer (modelled with cubic beam element), dealing with the incompatibility of Degrees-Of-Freedom between them (two DOF for the solid and three DOF for the beam). The aim of the solid-layer element is to simplify the mesh construction of the strengthened RC element being aware of two aspects: a) to prevent the inappropriate use of very small solid elements to simulate the coat; b) to improve the numerical estimation of the real bearing capacity of the strengthened element when the coat is attached or detached from the solid body.

• Coupled systems mechanics
• /
• 제12권6호
• /
• pp.481-501
• /
• 2023

Over-coating is one of the most popular engineering practices to strengthen Reinforced Concrete (RC) structures, due to the relative quickness and ease of construction. It consists of an external coat bonded to the outer surface of the structural RC element, either by the use of chemical adhesives, mechanical anchor bolts or simply mortar injection. In contrast to these constructive advantages, the numerical estimation of the bearing capacity of the strengthened reinforced concrete element is still complicated, not only for the complexity of modelling a flexible membrane or plate attached to a quasi-rigid solid, but also for the difficulties that raise of simulating any potential delamination between both materials. For these reasons, the standard engineering calculations used in the practice remain very approximated and clumsy. In this work, we propose the formulation of a new 2D solid-layer finite element capable to link a solid body with a flexible thin layer, as it were the "skin" of the body, allowing the potential delamination between both materials. In numerical terms, this "skin" element is intended to work as a transitional region between a solid body (modelled with a classical formulation of a standard quadrilateral four-nodes element) and a flexible coat layer (modelled with cubic beam element), dealing with the incompatibility of Degrees-OfFreedom between them (two DOF for the solid and three DOF for the beam). The aim of the solid-layer element is to simplify the mesh construction of the strengthened RC element being aware of two aspects: a) to prevent the inappropriate use of very small solid elements to simulate the coat; b) to improve the numerical estimation of the real bearing capacity of the strengthened element when the coat is attached or detached from the solid body.

• 한국산학기술학회논문지
• /
• 제21권5호
• /
• pp.69-76
• /
• 2020

수중에서 방사된 음원의 신호는 해수면, 해저면 반사에 의한 다중경로 시간지연(multi-path time-delay)을 포함하여 체계(system)의 센서에 수신된다. 다중경로 환경과 복잡한 해양환경의 외란(disturbance)에 의해 수신된 신호간 상관성(coherence)이 저하된다. 따라서, 신호간 시간지연값을 이용하여 수중음원의 위치를 추정하는 체계는 추정성능의 저하가 나타난다. 이러한 환경에서도 강인한 음원 위치 추정성능을 위해 선배열(uniform line array), 평면배열(rectangular array)과 같은 다양한 형태의 센서배열과 빔형성(beamforming) 기법, 비용함수(cost-function)과 같은 신호처리를 이용하여 왔다. 본 연구에서는 선배열 형태의 doublet array와 추정된 시간지연값 보정 기법을 이용하고자 한다. 3 개의 doublet array를 동일 선에 위치하였으며 각각의 doublet array에 수신된 신호간의 시간지연값을 2 단계로 추정하였다. 수신신호에 대해 상호상관(cross-correlation) 함수를 적용하여 추정된 시간지연값을 수신신호의 중심주파수(center-frequency)와 array의 개구경(aperture) 및 수중음원과의 기하학적 관계에 따라 보정하여 최종의 시간 지연값을 얻었으며 이로부터 음원의 거리와 방위를 추정하였다. 제안한 기법의 타당성을 확인하기 위해, Monte-Carlo method를 이용하여 시뮬레이션하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.23-32
• /
• 2004

본 연구에서는 고정된 나침 방위에서 측정한 단일 자차만을 이용하여 자차계수 B 와 C를 추정할 수 있는 새로운 방법을 기술하였다. 먼저, 4척의 미해군 함정에서 실제 측정한 자차를 이용하여 자차계수 B와 C만을 적용하여 자차합성하는 경우의 문제점을 분석하였다. 그리고, 최적 추정계수 B와 C의 획득 이론과 절차를 전개하고, 제안한 방법의 유효성을 평가하였다. 평가결과, 추정한 B와 C가 측정한 단일 자차를 최적으로 근사할 수 있음을 나타냈다.

• 산업기술연구
• /
• 제22권A호
• /
• pp.229-240
• /
• 2002

This paper is an experimental and numerical work of Investigating the bearing capacity of shallow foundation of rubble mound under eccentric loads. Parametric centrifuge model tests at the 50g level environments with the model footings in the form of strip footing were performed by changing the loading location of model footing, relative density and materials for ground foundation. For the model ground, crushed rock sampled from a rocky mountain was prepared with a grain size distribution of having an identical coefficient of uniformity to the field condition. Model ground was also prepared with relative densities of 50 % and 80 %. For loading condition, model tests with and without eccentric load were carned out to investigate the effect of eccentric loads and a numerical analysis with the commertially available software of FLAC was performed. For numerical estimation with FLAC, the hyperbolic model of a nonlinear elastic constitutive relationship was used to simulate the stress-stram constitutive relationship of model ground and a series of triaxial compression test were carried out to find the parameters for this model Test results were analyzed and compared with Meyerhof method (1963), effective area method based on the limit equilibrium method, and a numerical analysis with FLAC.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.747-754
• /
• 2010

The objective of this study is improve the technology by various testing devices for measuring degree of compaction. The methods for quality control for compaction are very various. But, normally the specifications have provided PBT(Plate Bearing Test) method when inspector tested quality control. In spite of the PBT has a few weak points to reduce process and cost. In order to improve quality control method, analyzed in-situ test results between PBT and other devices.(LWDT and Geogauge).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1117-1124
• /
• 2008

In This paper, load-settlement curves that obtained from 11 sites were analyzed. At all tests, the load is applied until apparent failure is observed. The validity of the ultimate and yield load estimation method and load calculated from the settlement criterion was investigated through comparison with the measured data. The result indicated that B. Hansen 80% criterion and Stability Plot in ultimate loading decision law almost have been regared as same by comparing measured date and ultimate bearing capacity decided in depending yield loading decision law from 13% to 46% difference have taeyaeen came out when measured data and Davisson was compared, and S-log t from 5% to 41% log P-log S from 14% to 50% difference have been came out. When Settlement standard and measured data was compared difference had been came out about 3% in total settlement 0.1D criterion and from 12% to 35% difference had been came out in net settlement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.389-394
• /
• 2011

Existing FPS(Friction Pendulum System) is isolation system which is possible to isolate structures by pendulum characteristic from ground vibration. Structural natural frequency could be decided by designing the radius of curvature of FPS. Thus, response vibration could be reduced by changing natural frequency of structures from FPS. But effective periods of recorded seismic wave were various and estimation of earthquake characteristic could be difficult. If effective periods of seismic wave correspond to natural frequency of structures with FPS, resonance can be occurred. Therefore, CFPBS(Cone-type Friction Pendulum Bearing System) was developed for controlling the response acceleration and displacement by the slope of friction surfaces. Structural natural frequency with CFPBS can be changed according to position of ball on the friction surface which was designed cone-type. Therefore, Divergence of response could be controlled by CFPBS which had constantly changing natural frequency with low modal participation factor in wide-range. In this study, Seismic performance of CFPBS was evaluated by numerical analysis and shaking table test.

• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.43-54
• /
• 1999

Shear tests are performed on four full-scale 12.5 m proto-type models, "least depth double tee," which are resulted from the optimization process. Domestic superimposed live load regulation, domestic material properties which is available to product. Korean building code requirements, construction environments and economy are considered as the main factors to establish the process. All of the specimens tested fully comply with the shear strength requirements as specified by ACI 318-95. The research has shown following results. 1) The development length requirement of ACI 318-95 does not seem a good predictor for the estimation of bond failure in a beam with the strands below the supports. 2) The load required for the first initial coner cracking in the dap end and first web shear cracking does not seem to have any relation with the dimension and shear strength of the section in the test beams. 3) The strand slip has a direct relationship with the web shear cracking. However, the coner cracking in the dap end does not give any help for the slip in anchorage. 4) Use of whole area for bearing steel at the bottom of dap end is desired for safe bearing pressure design in the precast prestressed double tee beams. 5) The deflection of beam influences directly on the amount of strand slip at the anchorage after initiation of it, and relationship between them are very linear.