• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.2
• /
• pp.55-62
• /
• 1996

The purpose of this study is the evaluation of adsorption capacity of casts for heavy metals comparing with the activated carbon. The casts was obtained from vermicomposting of the mixed organic sludges which were generated from the treatment facilities for leather wastewater and cattle wastewater. The physico-chemical characteristics of cast was investigated. Also, the batch adsorption experiments of cast and activated carbon for heavy metals were carried out, and the results were analyzed by Freundlich isotherm. The buffering capacity to the acidic wastewater was founded in the cast, and the cation exchange capacity of cast impling adsorption capacity for soluble substances was evaluated as about 55me/100g. Those were implied that the cast have a large potential as a good adsorbent for soluble pollutants in wastewater. From the results of batch experiments, the removal efficiencies of tested various heavy metals including Pb, Cu, Cd, and Cr were very high value as 89-98% for the activated car-bon, and 80~95% for the casts except for Zn. The adsorption equilibriums for the two materials were achieved within 90 minutes. The order of preferable metals in the adsorption was found to be Pb>Cu>Cd>Cr>Zn on the cast and to be Pb>Cd>Cu>Cr>Zn on the activated carbon, respectively. From the above results, it might be con-cluded that cast is effectively available as a good adsorbent to treating the heavy metal bearing wastewater.

• Research in Plant Disease
• /
• v.15 no.3
• /
• pp.259-261
• /
• 2009

Sclerotinia shoot rot of Grapevine(Vitis labruscana) occurred at Gapyeong and Yeongwol area from 2003 to 2005. Infected plants showed shoot blight at the one-year-old fruit bearing branches. The first visible symptom noticed was wilting and blighting of the branches. The obvious and typical initial symptom is the presence of a cottony, white, dense mat of mycelial growth on the surface of the diseased lesions. The base or stem of the infected young shoots develop a pale brown rotted area, which girdled and killed shoots. In advanced stages of the disease, stems and branches became bleached and eventually died. The isolates collected from diseased grapevine stem were identified as Sclerotinia sclerotiorum based on the morphological and cultural characteristics. The pathogenicity test revealed that Vitis vinifera(cultivar: Kyoho) was stronger than V. labruscana(cultivar: Campbell early) to the pathogen. This is the first report on sclerotinia shoot rot of grapevine in Korea.

• Research in Plant Disease
• /
• v.13 no.1
• /
• pp.57-60
• /
• 2007

A rhizopus soft rot caused by Rhizopus stolonifer occurred sporadically on grape in orchard in Gyeongsang-nam-do Agricultural Research and Extension Services and in Wholesale Market of Agricultural Products in Jinju city. The infected fruits were rapidly water-soaked, softened and eventually rotted, and the symptoms were initiated from wounds or cracks occurred at harvest time. Sporangiophores were $850{\sim}1,800{\mu}m$ in length and $12{\sim}23{\mu}m$ in width. Sporangia were globose or hemispheric and $80{\sim}190{\mu}m$ in size. The color of sporangia was white and cottony at first and gradually to brownish black, bearing abundant spores when it matured. Columella were hemispheric and $70{\sim}95{\mu}m$ in size. Sporangiospores were irregular round or oval, brownish-black streaked and $8{\sim}22{\times}6{\sim}10{\mu}m$ in size. The optimum temperature for mycelial growth of the fungus on PDA was 25$^{\circ}C$. On the basis of mycological characteristics and pathogenicity to grape (Vitis vinifera), the causal fungus was identified as Rhizopus stolonifer (Ehrenberg ex. Fr,) Lind. This is the first report of Rhizopus soft rot by R. stolonifer on grape (V. vinifera) in Korea.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.1 s.51
• /
• pp.21-33
• /
• 2007

The dispersion/flocculation behavior of bentonite is a major concern in performance of drilling fluid. We studied the dispersion/flocculation characteristics of three commercial bentonites [two CMC (carboxymethyl cellulose) treated and one untreated] in waters of different pHs and salt concentrations. We also examined changes in the viscosity of bentonite suspensions in such waters as a major rheological property of drilling fluid. The dispersion/flocculation behaviors of bentonites were measured by two methods: colorimetric and light scattering method. Light scattering method allows estimating the floc diameter and flocculation rate. The dispersion and flocculation behaviors were diverse with the different bentonites and water qualities. In distilled water, all the bentonites were well dispersed up to first 10 minutes. After that, the CMC-bearing bentonites were flocculated. In salt waters, all the samples were flocculated and the flocculation rate is varied with salt concentration and polymer content. The volume of settled flocs decreased with increasing salt concentration. The flocculation rate and floc diameter increased with decreasing pH of solutions, whereas the volume of settled flocs increased with increasing pH of solutions. The bentonites of fast flocculation behavior had low viscosity. The results of the present study will be helpful in applying bentonites to drilling fluids in diverse environments.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.3
• /
• pp.261-277
• /
• 2009

This study is aimed to emphasize the significance of ore selection in lime manufacturing through the evaluation of applied-mineralogical impact factors of crude ores controlling calcination characteristics for some domestic limestones used currently for lime manufacturing. To do this work, systematic characterization and determination were carried out for the limestone ores and their calcination products in a fixed calcining condition (target temperature: $1000^{\circ}C$, retention time: 30 minutes, 2, 4, 10, 16 hours), and the results were correlated and discussed. Selected high-Ca limestones in this study are as much as > 98 wt%, but they are somewhat diverse in crystallinity, texture, and impurity composition. Synthesized quicklimes are varied depending on such a difference in ore characters. The Pungchon limestone has relatively very low calcination rate, and the limestones from the Gabsan formation and the Jeongseon formation exhibit good quality in calcination rate and decrepitation. Among these samples, the limestone ore from the Jeongseon formation is evaluated to be the best for crude ore in manufacturing of highly-reactive quicklime. In addition, it is characteristic that the Gabsan limestone comparative rich in Fe-bearing mineral such as pyrite and goethite is more conspicuous in sintering effect.

• Economic and Environmental Geology
• /
• v.30 no.3
• /
• pp.209-222
• /
• 1997

The Hoenam area, up the Taecheong lake, composed mainly of low grade coal-bearing metapelites within the Ogcheon Supergroup. These coal formations are developed discontinuously several hundred meters and swelling from 10 to 300 cm along the host metapelites. Although the formations have been mined for coal, but already mined out, and the formations were higher content (mean value of 42 samples) of environmental toxic elements as As (13 ppm). Ba (1.81 wt. %), Cd (2 ppm), Cr (188 ppm), Cu (87 ppm), Mo (214 ppm), Pb (25 ppm), Sb (3 ppm), Se (12 ppm), U (55 ppm), V (2124 ppm) and Zn (234 ppm) than the host metapelites and the NASC. The Al, Ti, Mg, K and Na contents in stream sediments derived from the Hando and Bugook mine area were highly concentrations than the samples from the Samseongjeil mine area. The mean value (wt. %) of Fe (10.07), Mn (0.15), Ca (0.84), P (0.18) and Ba (0.77) influenced by the Samseongjeil mine were higher than the other mine drainage sediments. The mean content (ppm) of environmental toxic elements in drainage sediments from the Samseongjeil mine were taken As (2083), Cu (447), Mo (202), Ni (720), Pb (42), U (250), V (1070) and Zn (2632), which are extremely high concentrations against NASC and EPA. Characteristics of elemental behavior and dispersion of the all toxic elements are the same as increased with increasing U, V, and Cu. Rare earth elements in the sediments are enriched with LREE (La, Ce and Nd) from the drainage on strong concentration of toxic elements. The pH of stream water is neutral, but pH of the sediments ranged from 4.92 to 6.93 (mean 6.22), those are slightly acid in the Hando mine area. Major elements in the host rocks at the Hoenam area are mostly depleted especially Ca, excepting Ti and Ba, normalized with NASC. The sediments were highly enriched of Ti, Fe, Mg, Mn and Ba, but depleted of Al, K, Ca, Na and P on the basis of host rocks and NASC. Minor and environmental toxic elements in the host rocks were strongly enriched all elements (As, Cd, Mo, Se, D, V and Zn), excepting Co, Ni and Sr. Enrichment index (mean value) about toxic elements (As, Cr, Cu, Fe, Ni, Pb and Zn) of the sediments in this area have taken 41.35 (Hando mine drainage; 2.73, Samseongjeil mine drainage; 113.14 and Bugook mine drainage; 8.19), those are seriously contaminated by environmental toxic elements.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.3
• /
• pp.284-294
• /
• 2006

Statement of problem. Proliferation of Candida albicans is primarily within the plaque on the fitting surface of the denture rather than on the inflamed mucosa. Consequently, the treatment of the denture is equally important as treatment of the tissue. Cleansing and disinfection should be efficiently carried-out as the organisms can penetrate into the voids of the acrylic resin and grow in them, from which they can continue to infect and reinfect bearing tissues. Purpose. The purpose of this study was to evaluate the applicability of photocatalytic reaction to eliminate Candida albicans from acrylic resin denture base, and to investigate the anti-fungal effect with various UVA illumination time. Materials and Methods. The specimens were cured by the conventional method following the manufacturer's instruction using thermal polymerized denture base resin (Vertex RS: Dentimex, Netherlands). $TiO_2$ photocatalyst sol(LT), which is able to be coated at normal temperature, was made from the Ti-alkoxide progenitor. The XRD patterns, TEM images and nitrogen absorption ability of the $TiO_2$ photocatalyst sol(LT) were compared with the commercial $TiO_2$ photocatalyst P-25. The experimental specimens were coated with the mixture of the $TiO_2$ photocatalyst sol(LT) and binder material (silane) using dip-coater, and uncoated resin plates were used as the control group. Crystallinity of $TiO_2$ of the specimen was tested by the XRD. Size, shape and chemical compositions were also analyzed using the FE-SEM/ EDS. The angle and methylene blue degradation efsciency were measured for evaluating the photocatalytic activity of the $TiO_2$ film. Finally, the antifungal activity of the specimen was tested. Candida albicans KCTC 7629(1 ml, initial concentration $10^5$ cells/ ml) were applied to the experiment and control group specimens and subsequently two UVA light source with 10W, 353 nm peak emission were illuminated to the specimens from 15cm above. The extracted $2{\mu}l$ of sample was plated on nutrient agar plate ($Bacto^{TM}$ Brain Heart Infusion; BD, USA) with 10 minute intervals for 120 minute, respectively. It was incubated for 24 hours at $37^{\circ}C$ and the colony forming units (CFUs) were then counted. Results. Compared the characteristics of LT photocatalyst with commercial P-25 photocatalyst, LT were shown higher activity than P-25. The LT coated experimental specimen surface had anatase crystal form, less than 20 nm of particle size and wide specific surface area. To evaluate the photocatalytic activity of specimens, methylene blue degradation reaction were used and about 5% of degradation rate were measured after 2 hours. The average contact angle was less than $20^{\circ}$ indicating that the LT photocatalyst had hydrophilicity. In the antifungal activity test for Candida albicans, 0% survival rate were measured within 30 minute after irradiation of UVA light. Conclusion. From the results reported above, it is concluded that the UVA-LT photocatalytic reaction have an antifungal effect on the denture surface Candida albicans, and so that could be applicable to the clinical use as a cleaning method.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.13-43
• /
• 2017

In the Hapcheon area, hypersthene-bearing monzonite (mangerite) and syenite are recognized. The main minerals of syenite are alkali feldspar, plagioclase, amphibole, biotite, and quartz. Anhedral hornblende and biotite are interstitial between feldspar and quartz, indicating that the hydrous minerals were crystallized later on. Based on petrochemical studies of major elements, syenite is alkaline series, metaluminous, and I-type. The variation patterns in the trace and rare earth elements of mangerite and syenite show the features of subduction-related igneous rock such as depletion of HFSE, relative enrichment in LILE to LREE, and negative Nb-P-Ti anomalies. Based on the experimental data and petrographic characteristics of the syenite, Hapcheon syenitic magma is considered to be formed by partial melting in a dry system. SHRIMP U-Pb zircon data yield the Triassic age as $227.4{\pm}1.4Ma$ in mangerite, $215.3{\pm}1.2Ma$ in syenite, and $217.9{\pm}2.6Ma$ in coarse-grained syenite, respectively. The mangerite age is similar to those of post-collisional plutonic rocks in Hongseong (226~233 Ma), Yangpyeong (227~231 Ma), and Odaesan (231~234 Ma) areas in the Gyeonggi Massif. Syenites were intruded after about 10 Ma. The features seen in the mangereite and syenite rocks can be explained by models such as the continental collision and slab break-off and the lithosphere thinning and asthenosphere upwelling model.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.31-40
• /
• 2011

Copper-red (Dongwha, Jinsa) is Korean traditional inorganic pigment used for red-coloring on the porcelain surface during Goryeo and Joseon Periods. Trace amounts of copper-red porcelains are handed down because of the technical difficulty of making and coloring of the pigment. It is known that copper ore sources were extensively distributed in Korea according to old literatures and some of them are still producing copper ore at this present. Main types of copper-bearing mineral in Korea are chalcopyrite ($CuFeS_2$) and malachite ($Cu_2CO_3(OH)_2$), and they are easily collected from the ground surface. This means Korea had geographical and economic geological advantages for supplying raw material of the pigment. These two minerals showed good red-coloring in color test for porcelain pigment. As a coloring element, copper showed micro size less than $5{\mu}m$ in diameter in glaze matrix. The dispersion of copper particle is the most decisive factor for red chromaticity of copper-red porcelain, as well as copper content of the pigment.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.975-982
• /
• 2005

Scientific community agrees about the fact that base Isolation provides interesting solutions to minimize the seismic risk. Reliability of such a technique is nowadays proofed by a large number of applications like public buildings, nuclear plants, bridges, etc. This paper reports the results of performance verification tests of the base isolated RC building with the laminated rubber bearings which is manufactured by enterprise in Korea. The shaking table tests were performed using a three story model scaled to 1/3 of the prototype RC apartment building. Several major earthquake records were scaled to different peak ground accelerations and used as input base excitations. Especially in this study, effect of earthquake characteristics on response reduction and effect of the intensity of excitations are studied. Through the verification tests, the validity of the applied base isolaion device and the response reduction effect against earthquakes are confirmed.