• 한국환경복원기술학회지
• /
• 제9권5호
• /
• pp.10-21
• /
• 2006

For analyze of the bearing capacity, skin friction and settlements of pile on axial compressive loading, both Load transfer tests of pile and pile loading test in field have application to commonly before pile installing. A bearing capacity of pile was affected by the characteristics of surrounding ground of pile. Especially, that is very different because of evaluation of settlement due to each soil conditions of ground depths. The ground characteristics using evaluation of bearing capacity of pile through load transfer analysis depends on N values of SPT, and then a bearing capacity of pile installed soft ground and refilled area may be difficult to rational evaluation. An evaluation of bearing capacity on pile applied axial compressive loading was effected by strength of ground installed pile, unconfined compressive strength at pile tip, pile diameter, rough of excavated surface, confining pressure and deformation modules of rock etc and these are commonly including the unreliability due to slime occurred excavation works. Load transfer characteristics considered ground conditions take charge of load transfer of large diameter pile was investigated through case study applied load transfer tests. To these, matrix analytical technique of load transfer using finite differential equation developed and compared with the results of pile load test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1026-1031
• /
• 2001

In this paper. the dynamic characteristics of a super high-speed tilting-pad air bearing(TPGB) used in a turbo expander with high expansion ratio are analyzed. The dynamic behavior and stability of a rotary system supported by two journal air bearings are investigated numerically. The transient response of the shaft is obtained by simultaneously solving the equation of motion of the shaft and the dynamic Reynolds equation. The stiffness and damping coefficients of the bearing are calculated from the loading coefficients of the bearing are calculated from the loading capacity. shaft velocity and displacement by using a curve fitting method. The natural frequencies of the 1st and 2nd rigid modes can be calculated from these coefficients. The theoretical method of a rigid rotor system is verified by experimentsut.

• 한국유체기계학회 논문집
• /
• 제5권2호
• /
• pp.43-49
• /
• 2002

In this paper, the steady-state performances analysis of a tilting pad gas bearing(TPGB) we analyzed by using finite element method for compressible Reynolds' equation. TPGB is used in a high-expansion-ratio expander running at a speed of 230,000 rpm. In order to solve the nonlinear finite element equations, the Newton-Raphson method is applied. The variations of the loading capacity, friction force and tilting angle of a single pad v.s. eccentricity direction of eccentricity and bearing number are investigated. The condition for the equilibrium of a pad, which is important for safe working of the bearing, is stated. The performances of the three pad bearing such as loading capacity, friction moment are predicted.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.177-185
• /
• 2000

The characteristics of multi-leaf feil bearing are investigated. The Foil bearing is preloaded and has several leaf foils modeled by curved beams. An analysis of the air foil bearing was performed, considering effects of foil deflection and compressible lubrication equation simultaneously. A parametric study shows that the number of foils significantly affect the static characteristics of air foil bearings and describes what the minimum film thickness means. The results include pressure profile, load capacity, dimensionless torque and minimum film thickness in the foil bearing.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.146-153
• /
• 1999

A numerical dynamic simulation is necessary to investigate the capacity of the HDD. The slider surface become more and more complicated to make the magnetized area smaller and readback signal stronger. So a numerical dynamic simulation must be preceded to develop a new slider in HDD. The dynamic simulations of air-lubricated slider bearing have been peformed using FIFD(Factored Implicit Finite Difference) method. The governing equation, Reynolds equation Is modified with Fukui and Kaneko model(FK model) which includes the first and the second-order slip. The equations of motion for the slider bearing are solved simultaneously with the modified Reynolds equation for the case of three degrees of freedom. The slider transient response for disk step bump and slider impulse force is given for various case and for iteration algorithm and new algorithm.

• 한국지반공학회논문집
• /
• 제35권12호
• /
• pp.59-67
• /
• 2019

최근 증가되고 있는 준설 및 매립지반의 해안 공사에서 토목섬유매트 활용이 많아짐에 따라 연약지반의 지지력에 대한 산정은 안전성 평가를 위한 중요한 지표이다. 지반 개량을 위해 토목섬유매트와 복토층을 포설하여 이질층으로 구성된 연약지반의 허용지지력 검토는 일반적으로 Meyerhof(1974)와 Yamanouchi(1985) 방정식을 비교한다. Meyerhof(1974) 수식 결과는 허용지지력의 과소평가로 경제적인 손실을 초래하며, Yamanouchi(1985) 수식은 펀칭전단파괴에 대한 안전사고를 고려하지 않아 다소 큰 지지력을 평가한다. 토목섬유매트의 봉합인장강도를 설계기준에 적용하여 적절한 허용지지력을 산정하는 수정방정식을 제안함으로서 경제성과 안정성을 확보할 것으로 판단된다.

• 한국지반공학회지:지반
• /
• 제13권1호
• /
• pp.75-84
• /
• 1997

본 고에서는 지하공동위에 위치한 확대기초의 지지력 산정기법을 제시하였다. 지지력 산정기법의 개발을 위해서 필자에의해 개발된 3차원 탄소성 유한요소해석 프로그램을 이용하여 지하공동위에 위치한 확대기초의 지지력에 대한 매개변수 변환연구를 수행하였다. 매개변수 변환연구의 결과를 이용하여 각 경계조건의 지지력을 평가하고 이를 지지력 산정기법 개발에 필요한 데 이터 베이스로 활용하였으며, 수집된 데이터 베이스에 대한 다중회귀분석을 통해 반 경험적 지지력 산정기법을 개발하였다. 개발된 지지력 산정기법은 기존의 모형기초실험 및 유한요소해석 결과와의 비교를 통해 그 타당성이 검증되었으며, 그 결과 본 연구의 범위내에 해당하는 실제 현장문제에 효율적으로 적용될 수 있을 것으로 사료된다.

• 한국지반신소재학회논문집
• /
• 제13권1호
• /
• pp.53-61
• /
• 2014

준설매립지반은 준설토에 의해 매립되어 지반이 매우 연약한 상태이며, 설계시 정확한 지지력을 예측하는 것은 더욱 힘들다. 실제 준설매립지를 대상으로 여러 가지 연약지반처리공법을 설계하고 있지만, 특히 준설토지반의 특성에 기인한 장비진입 즉 표층처리공법 또한 문제점을 안고 있다. 이러한 문제점을 개선하고자 연약지반에서 적용 할 수 있는 평판재하시험장치를 개발하게 되었다. 본 연구에서는 준설매립현장을 대상으로 현장에서 개발된 평판재하시험을 이용하여 현장시험을 실시하였으며, 아울러 콘테스트만의 결과를 가지고 준설토지반의 지지력을 구하는 실험식을 제안하고자 하였다. 대부분 준설매립지반은 매립경과시간에 따라 표면건조층의 두께가 달라지게 되므로 본 연구에서 제안한 실험식이 매우 효과적인 방법이라 판단되며, 향후 준설토 매립지반의 공법설계시 기초자료로 활용될 수 있을 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.558-561
• /
• 2001

SIP(Soil cement Injected Precast pile) that inserts a precast pile after injecting a cement paste into a boring has been applied rapidly through the change of construction circumstances. But there isnt any logical equation of a bearing capacity fitted to SIP yet. So Meyerhof equation has mainly been used to predict a bearing capacity in a design stage instead. But it has shortcomings such as lack of confidence because it has derived not from a theory but from an experience obtained from the result of SPT (Standard Penetration Test) and because a penetration depth tends to be deeper by an excessive design that depends on an end bearing capacity of a pile more than a skin frictional resistance. In this study, thereupon, a direct shear test in the laboratory was performed to both SM and SC soils in variable conditions to verify skin friction properties for the purpose of presenting some reasons capable of reducing penetration depths. Through the tests, soil to soil of SM in cohesion, rough panel to soil of SM in friction angle and soil to soil of SM in shear strength tended to be high. And a shear strength increased as its total unit weight increased in all cases.

• Tribology and Lubricants
• /
• 제17권4호
• /
• pp.290-296
• /
• 2001

Lift-off means that the rotating journal surface separates from the leaf surface in an air-lubricated multi-leaf foil journal bearing. Lift-off builds up minimum film thickness which will provide load capacity between leaves and journal. In this paper an analysis of air-lubricated multi-leaf foil journal bearing was performed with effects of multi-leaf foil deflection and compressible lubrication equation simultaneously. Minimum film thickness built up versus journal speed predicts the lift off characteristics and these results will be useful in designing and selecting the proper speed of the air-lubricated multi-leaf foil journal bearing.