• Earthquakes and Structures
• /
• v.18 no.2
• /
• pp.215-222
• /
• 2020

In this paper, slit steel rubber bearing is presented as an innovative seismic isolator device. In this type of isolator, slit steel damper is an energy dissipation device. Its advantages in comparison with that of the lead rubber bearing are its simplicity in manufacturing process and replacement of its yielding parts. Also, slit steel rubber bearing has the same ability to dissipate energy with smaller value of displacement. Using finite element method in ABAQUS software, a parametric study is done on the performance of this bearing. Three different kinds of isolator with three different values of strut width, 9, 12 and 15 mm, three values of thickness, 4, 6 and 8 mm and two steel types with different yield stress are assessed. Effects of these parameters on the performance characteristics of slit steel rubber bearing are studied. It is shown that by decreasing the thickness and strut width and by selecting the material with lower yield stress, values of effective stiffness, energy dissipation capacity and lateral force in the isolator reduce but equivalent viscous damping is not affected significantly. Thus, by choosing appropriate values for thickness, strut width and slit steel damper yield stress, an isolator with the desired behavior can be achieved. Finally, the performance of an 8-storey frame with the proposed isolator is compared with the same frame equipped with LRB. Results show that SSRB is successful in base shear reduction of structure in a different way from LRB.

• Structural Engineering and Mechanics
• /
• v.78 no.5
• /
• pp.545-556
• /
• 2021

The present experimental study evaluated the seismic performance of six engineered cementitious composite (ECC) columns strengthened with carbon fiber reinforced polymer (CFRP) laminates under cyclic lateral loading. The ECC columns damaged and crushed in the first stage of cyclic tests were repaired using the ECC with a certain polyvinyl alcohol (PVA) fiber and strengthened with flexural and sheer CFRP laminates and then re-assessed under the cyclic loading. The effects of some variables were examined on lateral displacement, energy absorption and dissipation, failure modes, crack patterns, load bearing capacity and plasticity, and the obtained results were compared with those of the first stage of cyclic tests. The results showed that retrofitting the ECC columns can improve their performance, plasticity and load-bearing threshold, delayed the concrete failure, changed the failure modes and increased the energy absorbed by the strengthened columns element by over 50%.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.264-268
• /
• 2007

Flower and fruit characteristics, in 'Hongro' and 'Galaxy Gala' apples, were investigated by bearing branch lengths and flower bud position such as blow 5 cm, $10{\sim}15cm$ and above 20 cm length with terminal bud, and above 20 cm length with axillary bud for investigation on possibility of alternative use of long bearing branch and axillary bud in case of die-back of spur flower bud. In flowering characteristics by flower bud position in the above 20 cm length, the terminal bud was later and was short in flowering period, and also was little in number of flower per bud. Fruit weight, number of seeds, and sugar-acid ratio, in characteristics of ripening fruit, were more the blow 5 cm and $10{\sim}15cm$ length, but soluble solid and malic acid contents was the opposite tendency. In fruit characteristics by flower bud position in the above 20 cm length, the terminal bud had high tendency expected far number of seed in 'Hongro' and Hunter a value of 'Galaxy Gala' apple but had not significant difference. Correlation between fruit weight and number of seed was high. As the results, value of alternative use of long bearing branch in apples had a little expected for fruit weight, especially was more 'Galaxy Gala' and the axillary bud.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.278-283
• /
• 1997

This paper proposes a systematic design method for axial(or thrust) magnetic bearings using optimal design methodology. The objective of the optimal design is to minimize bearing volume. The constraints include the bearing load capacity, linearized bearing stiffness and damping, the magnetic flux density, and geometric relations. In order to obtain design values which can be applied to fabrication of bearings, branch and bound method was introduced in the postprocessing procedure of optimal design results. Verification of the proposed design methodology was perfomed by an example.

• Journal of Korean Society of Forest Science
• /
• v.97 no.5
• /
• pp.516-524
• /
• 2008

We investigated on the distribution of nutrient contents (N. P and K) in current and one-year old needles of Korean pine, Pinus koraiensis, to understand the physiological effects of alternate bearing. One experimental set was designed with three types of cone number (one, three and five) under natural state and cone number of another one was controlled by thinning. Test samples were separated to collect into three fractions; current needles on the shoot and one-year old needles above and under the cone. On the branch without cone, N, P and K concentrations in needles on the shoot were higher than those in needles of one-year old branch. At natural state, needle P concentration was the lowest in needles on the five-cone branch in August. Macronutrient concentrations were the lowest in needles above the cone, which was remarkably observed in needle K concentration. Under cone thinning, N. P and K concentrations were the highest in needles on one-cone branch and the lowest in needles on five-cone branch. Needle nutrient concentrations were the lowest in needles above the cone, which was remarkably observed in the needle on five-cone branch. In conclusion, the current needles of the shoot and cones are a strong sink of nutrient like N. P and K, and the increase of cone number influences nutrient removal from needles.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.432-440
• /
• 2011

The objective of this study was to investigate growth and fruiting characteristics (e.g., nut qualities) of chestnut (Castanea cerenata) after applying various fertilizer treatments at the cultivation site in Suncheon. Fertilizer treatments were designed as follow: liquid fertilizer, chemical fertilizer, organic fertilizer, and control. Both liquid and chemical fertilizer treatments provided the best growth in height and basal diameter. In addition, these two treatments were very effective for crown width of the trees between both east-west and north-south orientation. The liquid fertilizer treatment was effective on total length of the fruiting branch and length of the bearing to terminate part. Both liquid and chemical fertilizer treatments produced the longest length of basal to bearing part compared to the other two treatments. The liquid fertilizer treatment showed the most thickened basal diameter of the fruiting branch and the greatest diameter of above and below the bearing burr part. Elongation Index of the fruiting branch (EI) was the highest with liquid fertilizer treatment and the remaining four indices (Production Index of fruiting branch, PI; Ratio of Diameter between below and above bearing burr part, RD; Growth Index of fruiting branch diameter, GI; Thickness Index of fruiting branch or dormant branch, TI) were the highest with the chemical fertilizer treatment. Total number of produced branch per fruiting mother branch and number of small and weak branches per fruiting mother branch were highest on the control and liquid fertilizer treatment; however, all treatments produced similar numbers. The chemical and organic fertilizer treatments produced a high number of fruiting branches per fruiting mother branch, while organic and liquid fertilizer treatments produced a high number of burr per fruiting branch. The rate of commercializing on the basis of nut weight and quantity was higher on control (87.5%) than chemical fertilizer treatment (84.6%); however, the rate was even lower on liquid fertilizer treatment (84.3%) and organic fertilizer treatment (82.7%). The liquid fertilizer treatment showed the highest average of nut weight, while chemical fertilizer treatment showed the highest average number of fruiting burr. There was no significant difference in average number of normal nuts per burr among treatments. The yield per tree was high on chemical (8.2 kg) and liquid (8.0 kg) fertilizer treatments, but there was no significant difference among treatments. In the rate of nut grade on the basis of nut weight and quantity, the liquid fertilizer treatment, 43.5% and 34.3% more than large nut respectively, produced higher value chestnuts compared to other treatments.

• The Korean Journal of Malacology
• /
• v.25 no.1
• /
• pp.71-79
• /
• 2009

Based on investigation of archive collections of A.V. Zhirmunsky Institute of Marine Biology of the Far-Eastern Branch of the Russian Academy of Sciences (Vladivostok) and O.A. Scarlato Zoological Institute of the Russian Academy of Sciences (Saint Petersburg), as well as on the analysis of published data, the species composition of shell-bearing gastropod mollusks of the Russian waters of the East Sea (Sea of Japan), consisting of 331 species and subspecies, has been identified. The fourth part of the Review includes 46 species of Heterobranchia (Allogastropoda, Opistobranchia, and Pulmonata). Each species is assigned to a biogeographic grouping in the study area. Its type locality and habitat (depth and substrate) are also documented.

• The Korean Journal of Malacology
• /
• v.25 no.1
• /
• pp.51-70
• /
• 2009

Based on investigation of collections at the A.V. Zhirmunsky Institute of Marine Biology of the Far-Eastern Branch of the Russian Academy of Sciences (Vladivostok) and Zoological Institute of the Russian Academy of Sciences (Saint Petersburg), as well as on the analysis of published data, the species composition of shell-bearing gastropod mollusks of the Russian waters of the East Sea (Sea of Japan), consisting of 331 species and subspecies, has been identified. Each species is assigned to a biogeographic grouping in the study area. Its type locality and habitat (depth and substrate) are also documented. The third part of this review includes 129 species in Neogastropoda (Caenogastropoda).

• The Korean Journal of Malacology
• /
• v.26 no.2
• /
• pp.127-143
• /
• 2010

Based on investigation of collections at the A.V.Zhirmunsky Institute of Marine Biology of the Far-Eastern Branch of the Russian Academy of Sciences (Vladivostok) and Zoological Institute of the Russian Academy of Sciences (Saint-Petersburg), as well as on the analysis of published data, the species composition of shell-bearing gastropod mollusks of the Russian waters of the East Sea, consisting of 331 species and subspecies, has been identified. Eachspecies is assigned to a biogeographic grouping in the study area. Its type locality and habitat (depth and substrate) are also documented. The second part of this review includes 101 species from Sorbeoconcha and Hypsogastropoda (Caenogastropoda).

• The Korean Journal of Malacology
• /
• v.26 no.2
• /
• pp.115-126
• /
• 2010

Based on investigation of collections at the A. V. Zhirmunsky Institute of Marine Biology of the Far-Eastern Branch of the Russian Academy of Sciences (Vladivostok) and Zoological Institute of the Russian Academy of Sciences (Saint-Petersburg), as well as on the analysis of published data, the species composition of shell-bearing gastropod mollusks of the Russian waters of the East Sea, consisting of 331 species and subspecies, has been identified. Each species is assigned to a biogeographic grouping in the study area. Its type locality and habitat (depth and substrate) are also documented. The first part of this review includes 55 species from Patellogastropoda, Vetigastropoda and Cocculiniformia.