• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.266-272
• /
• 2022

Structural stress analysis is performed to confirm the safety of the structures before the construction, and stress analysis is performed to evaluate the safety of various components before the ship or vehicle corresponding to the moving structure is manufactured. In this case, the stress analysis work is performed using the stress analysis software of each company. The results of the stress analysis based on the boundary conditions of the applied loads are analyzed to evaluate the safety of the structure, but the results are difficult to verify because most of the stress analysis software possessed by each company is one. In this paper, we were performed the stress analysis of the bracket applied to the bare chassis of the 30-passenger bus under development is performed by HYPERMESH. In order to verify this, the stress analysis is performed using ANSA/META under the same boundary condition. The stress analysis results of ANSA/META and HYPERMESH showed that they had the same stress distribution and the maximum stress occurred at the same location. Taken together, the results of stress analysis using HYPERMESH were reliable.

• 천문학회보
• /
• 제44권2호
• /
• pp.42.1-42.1
• /
• 2019

We investigate a collapsing granule event and the associated excitation of waves in the photosphere and chromosphere. Our observations were carried out by using the Fast Imaging Solar Spectrograph and the TiO 7057Å Broadband Filter Imager of the 1.6 meter Goode Solar Telescope of Big Bear Solar Observatory. During our observations, we found a granule which became significantly darker than neighboring granules. The edge of the granule collapsed within several minutes. After the collapse, transient oscillations occurred in the photospheric and chromospheric layers. The dominant period of the oscillations is close to 4.5 minutes in the photosphere and 4 minutes in the chromosphere. Moreover, in the Ca II-0.5Å raster image, we observed brightenings which are considered as the manifestation of shock waves. Based on our results, we suggest that the impulsive collapse of a granule can generate upward-propagating acoustic waves in the solar quiet region that ultimately develop into shocks.

• 천문학회보
• /
• 제45권1호
• /
• pp.44.1-44.1
• /
• 2020

Hα jets of cool chromospheric plasma are protruding into the solar corona 10-100 Mm above the photosphere. The driving mechanisms of Hα jets have been widely studied for decades. However, the detailed process is still elusive. We observed shock signatures moving along a dark jet using 1.6 meter Goode Solar Telescope at Big Bear Solar Observatory. The first shock front of the jet shows sharp --- when it moves upward, while fuzzy and granulated when it moves downward. The jet itself extends upward when the second shock front of the jet reaches the top of the jet. We find abrupt EUV brightenings when the second shock front collides with the edge of the jet. The third front and the fouth front quasi-periodically. These phenomena might be the signs of the rebound shock waves triggered by p-mode wave leakages at the bottom of the jets. Our observation suggests that the jet can be triggered by the rebound shock waves generated by the p-mode waves leaked at the bottom of the jets.

• Structural Engineering and Mechanics
• /
• 제84권4호
• /
• pp.453-464
• /
• 2022

Thin plates are the most common spatially stressed members in engineering structures that bear out-of-plane loads. Therefore, it is of great significance to study the deformation performance characteristics of thin plates for structural design. By constructing 12 basic displacement and deformation basis vectors of the four-node square thin plate element, a deformation decomposition method based on the complete orthogonal mechanical basis matrix is proposed in this paper. Based on the deformation decomposition method, the deformation properties of the thin plate can be quantitatively analyzed, and the areas dominated by each basic deformation can be visualized. In addition, the method can not only obtain more deformation information of the structure, but also identify macroscopic basic deformations, such as bending, shear and warping deformations. Finally, the deformation properties of the bidirectional thin plates with different sizes of central holes are analyzed, and the changing rules are obtained.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 추계국제학술대회
• /
• pp.58-58
• /
• 2020

Xanthoceras sorbifolium Bunge (yellowhorn) is a woody tree in the soapberry family, Sapindaceae, native to northern China. This species has been identified as a major woody bioenergy plant for bio-diesel production because of high oil content in seed. But the flowers do not bear fruit well while the many flowers blooming. This study was performed to regenerate in vitro plantlet using adventitious shoot formation. To establish the protocol of plant regeneration, adventitious shoots formation rate in the culture of cotyledon of immature zygotic embryos was 68.6% in 1/2 MS medium with 0.5 mg l-1 BA and 3% sucrose (w/v). In the culture of cotyledons of mature zygotic embryos, induction of adventitious shoots was needed to contain high sucrose in pre-culture medium and the frequency of shoot induction was 64.4%. Multiple shoots were induced in 0.5 mg l-1 TDZ, and rooting of shoot was induced 4.0 mg l-1 IBA. Flow cytometry analysis revealed that all the regenerated plantlets were diploid.

• 한국응급구조학회지
• /
• 제13권1호
• /
• pp.19-33
• /
• 2009

Purpose : To check the legal relation between rescue team and patient as well as legal responsibility for patient's damage intentionally or erroneously caused by rescue member, a public official, in the performance of relevant job ; to prevent legal dispute over rescue team and to present program for fair settlement of dispute and equitable and feasible burden of damage. Method : First, the legal principle of Civil Law, Criminal Law and Administrative Law related to the theme of this research will be investigated around research by literature. Second, the case of dispute related to rescue team will be introduced. Result: 1. If 119 rescue members as a public official intentionally or erroneously cause damage to patient in the performance of job, they shall bear civil, criminal and administrative responsibility. They shall bear civil responsibility for indemnity for damage due to default or tort. The typical criminal responsibility includes accidental homicide arising out of duty, preparing falsified official document, dereliction of duty, etc. In the administrative side, the state is responsible for indemnity for peculiar status of the rescue member, public official. 2. Though raising civil petition or legal dispute over unsatisfactory rescue service may be reasonable to guarantee the right of nation, such action may cause stress to rescue member as well as may lead to mental shrinking and defensive attitude only to take the basic first aid treatment which has low possibility of mistake instead of active first aid treatment so as to avoid legal responsibility. 3. The program that may prevent legal dispute over 119 rescue team includes expansion of manpower specialized in first aid treatment, enhancement of education on legal environment, development and application of standard job guideline, formation of mutual trust with patient, detailed explanation, preparing and keeping minute record, improvement of the rescue members' ability of first aid treatment and development of medical instruction mode. Conclusion : The best policy is to prevent legal dispute. If it is impossible to basically exclude the possibility of dispute, however, we need to make effort to minimize the occurrence, settle fairly and divide damage equitably and feasibly. To improve the preventible death rate of our first aid system to the level of advanced country, 119 rescue team which is in charge of the stage before hospital needs to positively enforce special first aid by improving the qualitative level of rescue service and to strive to prevent legal dispute that may occur in the process.

• 한국산학기술학회논문지
• /
• 제12권10호
• /
• pp.4493-4501
• /
• 2011

본 연구는 장기요양보험급여를 받고 있는 노인들의 장기요양등급에 따른 인지기능상태를 파악해 보고, 인지 기능에 영향을 미치는 관련요인을 규명해 보고자 시도하였다. 조사는 충청남도 9개 군의 농촌지역에서 장기요양보험 급여를 받고 있는 노인 410명을 대상으로 2009년 3월 1일부터 5월 31일까지의 기간 동안에 표준화된 무기명식 면접조사용 설문지를 사용하여 면접조사 하였다. 연구결과, MMSE-K를 사용하여 측정한 전체 조사대상자의 인지기능상태는 확정적 인지기능장애(19점 이하)가 80.5%, 인지기능장애 의심(20~23점)이 11.7%, 확정적 정상(24점 이상)이 7.8%로 나타났다. 조상대상자의 인지기능은 장기요양등급이 높을수록 유의하게 낮은 것으로 나타났으며, 교육정도가 낮을수록, 직업이 없는 군, 혼자 산다는 군, 월수입이 낮은 군, 생활비를 자녀가 조달하거나 정부의 보조를 받는다는 군, 귀의 부자유가 있다는 군, 요실금이 있다는 군, 건망증이 있다는 군, 규칙적인 운동을 하지 않는다는 군, 외출을 거의 하지 않는다는 군에서 유의하게 낮았다. 조사대상자의 인지기능에 영향을 미치는 요인으로는 연령, 생활비 조달원, 눈의 부자유 유무, 요실금유무, 건망증유무, 규칙적인 운동 여부 및 장기요양등급이 유의한 변수로 선정되었으며, 특히 건강상태를 나타내는 변수들이 인지기능과 높은 관련성이 있었다.

• 의료법학
• /
• 제12권1호
• /
• pp.43-67
• /
• 2011

Humankind history is faced with one gigantic turning point due to development of Living genetically Modified Organisms. Food production by means of LMO is on the acceleration in an effort to solve the shortage of food problems. Food is also used as alternative energy source. Use of LMO product is not only limited to food and energy, but is actively utilized in various fields of medicines. This paper is first to check out the state of biomedicine developed and associated problems from industries that use LMO, after which we made an attempt on legislative approach to find out means of relief, through examples of such laws legislated for the sufferer from the adverse effect of the biomedicine. As for the liable subject to bear the responsibility for compensatory damage in a way of relieving the victim owing to adverse effect of biomedicine, those who manufactured and sold biomedicine and who are related to the damage to the victim due to the accident and medical doctors and pharmacists who prescribe and administer the medicine in question have been looked into. Accidents involving medicines and medical supplies could take place without reason for imputation on part of the liable subjects or fault of the victim, in which case the victim can't receive damage compensation from any of both parties. When such accidents happened turn out to be no fault accidents, introduction of damage relief measures might have to be reviewed against side effects of medicine and medical supplies as no fault compensation in order for actual relief to be possible. Talking about technicality of legislation, we can suggest a method of strengthening the accountability of manufacturer for stereotypical agenda on biomedicines by newly legislating special regulation with an issue that resists claim on risks associated with the development of medicine and incorporating the same into Manufactured Product Liability Law. After all, when an accident happens associated with biomedicine, the damage will be done to the consumer. And the consumer will be exposed to fatal danger even without the time to cope with potential risks associated with medicine and medical supplies they take. Therefore, it is necessary to protect the potential victim by having the manufacturer of biomedicines bear the liability of medical risks.

• 한국식품과학회지
• /
• 제19권6호
• /
• pp.550-555
• /
• 1987

건조실내의 압력과 건조시료의 수분감소량을 측정하기 위해 부르돈관과 하중변환기 표면에 strain gauge를 부착시켜 감응장치로 이용하였다. 이 감응장치를 Bear II 마이크로컴퓨터에 접속시켜 마이크로컴퓨터 감압건조시스템을 구성하였다. 접속장치로는 MC 6821, ADC 0809, SN 74244, SN 7474 등의 IC 칩이 사용되었다. 컴퓨터의 디지탈출력값(D)과 감압건조실내의 압력(P)과의 관계는 P=3.0800D-13.4875(r=0.9999)로 나타났고 시료무게 (W)와의 관계는 W=0.4076D-6.4762(r=0.9999)이었다. 표고버섯은 감압건조하는 동안 마이크로컴퓨터시스템을 이용하여 얻은 압력과 무게측정값의 자료로부터 표고버섯의 감압건조곡선을 얻었다. 이 결과 표고버섯의 감압건조에서는 온도나 시료의 형태가 건조속도에 그다지 큰 영향을 미치지 못했고 감압건조실내의 압력이 더 큰 영향을 미쳤다. 감압건조하에서 표고버섯내의 수분이동은 Page model을 따랐으며 그 관계식은 $50^{\circ}C$에서 건조된 원형 표고버섯의 경우 400mmHg에서 건조를 시작한 후 14시간 정도까지는 $(M-M_e)/(M_o-M_e)=\exp(-0.1569t^{1.0048})$로, 600mmHg에서 8시간정도까지는 $(M-M_e)/(M_o-M_e)=\exp(-0.1385_t^{1.2688})$이었다.

• 무역상무연구
• /
• 제45권
• /
• pp.85-109
• /
• 2010

L/C provides the exporter and the importer with safe assurance in the exchange of goods for payment in international trade. It involves a number of parties. Although the parties may have confidence in their client, bad faith or ignorance of international banking practice by any of these parties could cause the failure of transaction, which makes international trade a risky business. Most of the risks are found in transport document, which can cause disputes. There are many factors in the risk of transport documents under L/C transaction. One most common risk factor for the beneficiary in all transport documents is even if there is no discrepancy in document, the issuing bank or the applicant refuses to pay or delay payment insisting there is a discrepancy. In some very rare cases, the beneficiary may not get paid due to unfair injunction of the local court of the applicant. For the applicant, most common risk factors are fake bill and fraud. Risks classified according to the sorts of transport documents are as follows. 1. In B/L, payment can be refused because it is regarded as charter party B/L, although there is no real charter party contract. And the applicant can bear the potential risk of the loss or deterioration of cargo through transhipment of the cargo loaded on board in container if transhipment is prohibited without excluding of UCP 600 article 20 (c). 2. In charter party B/L, the applicant may take delivery without paying when charter party B/L is signed by charterer, which can result in a big loss for the beneficiary and the negotiating bank. And risks may arise when cargo is seized because the charterer does not pay the hire. The applicant and the issuing bank are also vulnerable to a risk - Against whom should they file a suit when cargo gets damaged during transportation? 3. In multimodal transport document, which is subject to a conflict because there is a big difference in viewpoints between transport industry and banks, conflicts may also arise when L/C requires ocean B/L and accepts multimodal transport document at the same time, but does not specify the details. 4. In air waybill, where the consignee is not the issuing bank but the applicant, risks may take place to the beneficiary when the applicant takes delivery but refuses to pay asserting minor discrepancies in document. The applicant may also bear the risk when cargo may not be loaded because air waybill is a received bill. Another risk may arise when although the applicant prohibits transhipment without excluding UCP 600 article 23 (c), the cargo may be transhipped, provided that the entire carriage is covered by one and the same air waybill.