• Membrane and Water Treatment
• /
• v.15 no.3
• /
• pp.107-115
• /
• 2024

This study proposes the recycling of MVS as a value-added product for the removal of phosphate from aqueous solutions. By comparing the phosphate adsorption capacity of each calcined adsorbent at each temperature of MVS, it was determined that the optimal heat treatment temperature of MVS to improve the phosphate adsorption capacity was 800 ℃. MVS-800 suggests an adsorption mechanism through calcium phosphate precipitation. Subsequent kinetic studies with MVS-800 showed that the PFO model was more appropriate than the PSO model. In the equilibrium adsorption experiment, through the analysis of Langmuir and Freundlich models, Langmuir can provide a more appropriate explanation for the phosphate adsorption of MVS-800. This means that the adsorption of phosphate by MVS-800 is uniform over all surfaces and the adsorption consists of a single layer. Thermodynamic analysis of thermally activated MVS-800 shows that phosphate adsorption is an endothermic and involuntary reaction. MVS-800 has the highest phosphate adsorption capacity under low pH conditions. The presence of anions in phosphate adsorption reduces the phosphate adsorption capacity of MVS-800 in the order of CO 3 2-, SO 4 2-, NO 3- and Cl-. Based on experimental data to date, MVS-800 is an environmentally friendly adsorbent for recycling waste resources and is considered to be an adsorbent with high adsorption capacity for removing phosphates from aqueous solutions. This paper combines the advantages of gray predictor and AI fuzzy. The gray predictor can be used to predict whether the bear point exceeds the allowable deviation range, and then perform appropriate control corrections to accelerate the bear point to return to the boundary layer and achieve.

• Korean Journal of Ecology and Environment
• /
• v.49 no.3
• /
• pp.197-207
• /
• 2016

This study aims at providing basic data to objectively evaluate the areas suitable for reintroduction of the species of Asiatic black bear (Ursus thibetanus) in order to effectively preserve the Asiatic black bears in the Korean protection areas including national parks, and for the species restoration success. To this end, this study predicted the potential habitats in East Asia, Southeast Asia and India, where there are the records of Asiatic black bears' appearances using the Maxent model and environmental variables related with climate, topography, road and land use. In addition, this study evaluated the effects of the relevant climate and environmental variables. This study also analyzed inhabitation range area suitable for Asiatic black and geographic change according to future climate change. As for the judgment accuracy of the Maxent model widely utilized for habitat distribution research of wildlife for preservation, AUC value was calculated as 0.893 (sd=0.121). This was useful in predicting Asiatic black bears' potential habitat and evaluate the habitat change characteristics according to future climate change. Compare to the distribution map of Asiatic black bears evaluated by IUCN, Habitat suitability by the Maxent model were regionally diverse in extant areas and low in the extinct areas from IUCN map. This can be the result reflecting the regional difference in the environmental conditions where Asiatic black bears inhabit. As for the environment affecting the potential habitat distribution of Asiatic black bears, inhabitation rate was the highest, according to land coverage type, compared to climate, topography and artificial factors like distance from road. Especially, the area of deciduous broadleaf forest was predicted to be preferred, in comparison with other land coverage types. Annual mean precipitation and the precipitation during the driest period were projected to affect more than temperature's annual range, and the inhabitation possibility was higher, as distance was farther from road. The reason is that Asiatic black bears are conjectured to prefer more stable area without human's intervention, as well as prey resource. The inhabitation range was predicted to be expanded gradually to the southern part of India, China's southeast coast and adjacent inland area, and Vietnam, Laos and Malaysia in the eastern coastal areas of Southeast Asia. The following areas are forecast to be the core areas, where Asiatic black bears can inhabit in the Asian region: Jeonnam, Jeonbuk and Gangwon areas in South Korea, Kyushu, Chugoku, Shikoku, Chubu, Kanto and Tohoku's border area in Japan, and Jiangxi, Zhejiang and Fujian border area in China. This study is expected to be used as basic data for the preservation and efficient management of Asiatic black bear's habitat, artificially introduced individual bear's release area selection, and the management of collision zones with humans.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.144-148
• /
• 2007

In this paper, we present a systematical procedure to develop a precision enclosed die forging process for a bevel gear of a passengers' car. The detailed procedure involves bear gear CAD modeling, process design and CAE simulation, CAM and die making, material preparation, and prototype manufacturing using both the technologies and machines accumulated and equipped in the technology innovation center(TIC) of Gyeongsang National University. It is demonstrated that the presented approach guarantees bevel gears with the second KS grade quality, which can be used for the differential gear of the passengers' car.

• Archives of Pharmacal Research
• /
• v.21 no.6
• /
• pp.738-743
• /
• 1998

Thirty six 5,8-dimethoxy-1,4-naphthoquinone derivatives, which bear unsaturated alkyl side chain with ester bond, were synthesized and tested cytotoxic activity on L1210 cells a nd antitumor activity against ICR mice bearing S-180 cells. It could be recognized that the cytotoxicities of naphthoquinones with R1, being methyl and propyl (IV1~24) were not enhanced by replacing the alkanoyls with alkenoyls. In contrast, the introduction of the alkenoyl moieties on the compounds with $R_1$=hexyl (IV25~36) resulted in the enhancement of their cytotoxicities. Replacement of alkanoyl group with an alkenoyl group generally increased the T/C value of the mice bearing S-180 cells.

• Animal cells and systems
• /
• v.7 no.4
• /
• pp.279-282
• /
• 2003

A new euthyplociid burrowing mayfly (Polymitarcyidae, Ephemeroidea, Ephemeroptera), Polyplocia orientalis n. sp., from Vietnam is described with larval habitus and line drawings of mouthparts. The larva of the species is characterized by the mandibular tusks that bear numerous hairlike and stout setae on their dorsal and lateral surfaces and by the apical process of foretibiae that is nearly one-fourth the length of foretarsi. Its habitat and biological data and taxonomic remarks are provided. The burrowing mayfly subfamily Euthyplociinae is reviewed from a historical perspective.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.209-217
• /
• 2013

The execution of a construction project involves the engagement of many participants. Generally, the Authority uses CM to certify that the Work is built according to the contract documents. The CM work scope is expressed in the Construction Technology Management Act and its Regulation. The mandated and delegated CM services are limited to the construction period. If Contractor is required to repair a construction defect, the Contractor should bear the burden of the inspection service for the defect repair, because it is associated with him. Nevertheless, CM should submit a bond to provide the inspection and supervision service for the defect repair. These may result in conflict with each liability. Therefore, CM service in the law and regulation was investigated and analyzed in this study to classify the characteristics of CM contracts, and it was suggested that the CM liability for the inspection and supervision service for the defect repair should be reconsidered.

• Journal of the Society of Disaster Information
• /
• v.4 no.1
• /
• pp.10-31
• /
• 2008

Recently, 'Juvenile' is associated with the 'Misconduct', for it becomes an object of public concern. Therefore in this study, we suggest counterplan about the group traits connected juvenile-life intimately. First, parents promote conversation among the family and are concerned about their children. And they find out the problems in the bud to educate beforehand Second, the counterplan by school attaches great importance to individual contact. Third, in the counterplan on social aspects, adults' unwholesome ideas, bad effects of the mass communication, the lack of teenager's association, negative activity, leisure facilities and lack of opportunity for juveniles bring about negative facts for education of teenagers. Therefore we need positive counterplan to enlighten the young and purify the social environment. And the nation establish righteous values for the younger generation to not commit a crime and punish severely as well as must prepare the realistic and clear policy for the young to bear the responsibility for their role.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.400-407
• /
• 2005

The reinforcing effect of modified structure of PSC beams is analyzed in this study. The PSC beams are closed by precast half panels embeding PS tendons at the bottom flange of I-bear The stiffness of box structure is larger and the PS force at half panels makes a time-dependent upward camber of superstructures. The superstructure becomes a second composite structure among 3 elements-PSC ben RC slab, PSC Panel. The time-dependent creep and shrinkage effect at PSC Panels and structural behavior is verified considering construction sequences. The optimal range of to-box reinforcing method is surveyed through reliability analysis.

• KDI Journal of Economic Policy
• /
• v.39 no.4
• /
• pp.51-68
• /
• 2017

This paper adapts the World Bank Regulatory Quality Index (RQI), which is produced annually to provide a better understanding of the effects of regulatory reforms, instead of the Production Market Regulation (PMR) indicators, which are published every five years. We find that 9.9 to 36.0 billion USD worth of regulatory cost could be reduced if the regulatory quality in Korea improves to the level of the OECD average considering that the total burden of regulation in Korea is estimated to range from 2.2 to 357.4 billion USD. The estimated reduction in the regulatory cost accounts for roughly 0.76 to 2.47% of Korea's GDP in 2013, underscoring the importance of regulatory reforms for the Korean economy. This paper introduces a new method with which to examine the distribution of regulatory costs across different industries and firm sizes. This alternative method is largely consistent with the conclusions reached by other studies, specifically that small firms typically bear a disproportionate regulatory burden.

• Journal of The Korean Astronomical Society
• /
• v.32 no.2
• /
• pp.137-147
• /
• 1999

Recent studies show the importance of understanding three-dimensional magnetic reconnect ion on the solar surface. For this purpose, I consider non-coplanar magnetic reconnection, a simple case of three-dimensional reconnect ion driven by a collision of two straight flux tubes which are not on the same plane initially. The relative angle e between the two tubes characterizes such reconnection, and can be regarded as a measure of magnetic shear. The observable characteristics of non-coplanar reconnection are compared between the two cases of small and large angles. An important feature of the non-coplanar reconnect ion is that magnetic twist can be produced via the re-ordering of field lines. This is a consequence of the conversion of mutual helicity into self helicities by reconnection. It is shown that the principle of energy conservation when combined with the production of magnetic twist puts a low limit on the relative angle between two flux tubes for reconnect ion to occur. I provide several observations supporting the magnetic twist generation by reconnection, and discuss its physical implications for the origin of magnetic twist on the solar surface and the problem of coronal heating.