• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.180-181
• /
• 2006

CdSe single crystal was grown by sublimation method in the two-step vertical electric furnace. This CdSe single crustal had hexagonal structure whose lattice constants of $a_0$ and $c_0$ were measured $4.299\;{\AA}$ and $7.009\;{\AA}$ by extrapolation method, respectively. CdSe single crystal was n-type semiconductor values were measured from Hall data by Van der Pauw method in the room temperature. Mobility tends to increase in proportion to $T^{3/2}$ from 33K to 130K due to impurity scattering. but mobility tends to decrease in proprtion to $T^{-3/2}$ from 130K to 293K due to lattice scattering. CdSe thin film was made by electron beam evaporation technique had also hexagonal structure. The grain size of this thin film was grown to $1{\mu}m$ as a result of annealing in the vapor of Ar or Cd. Annealde CdSe thin film was n-type semiconductor whose carrier density had about $7{\times}10^{12}cm^{-3}$ and its mobility had about $1.6{\times}10^3cm^2/V$ sec at room temperature.

• Transactions on Electrical and Electronic Materials
• /
• 제11권1호
• /
• pp.33-36
• /
• 2010

$MgF_2$ is a current material used for optical applications in the ultraviolet and deep ultraviolet range. Process variables for manufacturing $MgF_2$ thin film were established in order to clarify the optimum conditions for the growth of the thin film, dependant upon the process conditions, and then by changing a number of the vapor deposition conditions, substrate temperatures, and heat treatment conditions, the structural and optical characteristics were measured. Then, optimum process variables were thus derived. Nevertheless, modern applications still require improvement in the optical and structural quality of the deposited layers. In the present work, in order to understand the composition and microstructure of $MgF_2$, single layers grown on a slide glass substrate using an Electron beam Evaporator (KV-660), were analyzed and compared. The surface substrate temperature, having an effect on the quality of the thin film, was changed from $200^{\circ}C$ to $350^{\circ}C$ at intervals of $50^{\circ}C$. The heat treatment temperature, which also has an effect on the thin film, was changed from $200^{\circ}C$ to $400^{\circ}C$ at intervals of $50^{\circ}C$. The physical properties of the thin film were investigated at various fabrication conditions, such as the substrate temperature, the heat treatment temperature, and the heat treatment time, by X-ray diffraction, and field emission-scanning electron microscopy.

• 한국진공학회지
• /
• 제4권S2호
• /
• pp.148-155
• /
• 1995

(1) The metastable crystalline(MX) phases formed by ion mixing are classified into 5 types, i.e. the super-saturated solid solutions and the enlarged HCP-I phases reported earlier, and the newly observed FCC-I phases in hcp-based alloys, The FCC-ll and HCP-ll phases in bcc-based alloys. The growth kinetics of the MX phases is discussed. (2) The interfacial free energy in the multilayered films was found to play an important role in ion beam mixing(IM) induced amorphization. By adding sufficient interfaces, amorphous alloys were obtained even in the systems with rather positive heat of formation. (3) Gibbs free energy diagrams of some representative systems were constructed, by calculating the free energy curves of all the competing phases. Steady-state thermal annealing was conducted and the results confirmed the relevance of the constructed diagrams, which were inturn employed to interpret the MX phase formation as well as the glass forming ability upon IM in the binary metal systems.

• 한국표면공학회지
• /
• 제47권6호
• /
• pp.347-353
• /
• 2014

We present a synthesis of single-walled carbon nanotubes(SWNTs) for enhancement of parallel-alignment and density using chemical vapor deposition with methane feed gas. As-purchased ST-cut quartz substrates were heat-treated and line-patterned by electron-beam lithography in order to grow SWNTs with parallel alignment. We investigated the effects of various synthesis parameters such as catalyst oxidation, reduction, and synthesis conditions in order to enhance both tube density and degree of parallel alignment. The condition of $1{\AA}$ of Fe catalyst film, atmospheric oxidation at $750^{\circ}C$ for 10 min, reduction under 400 Torr for 5 min, and growth at $865^{\circ}C$ under 300 Torr yields $33tubes/10{\mu}m$, which is the highest tube density with parallel alignment. Based on the results of atomic force microscope and Raman spectroscopy, it was found that SWNTs have diameter range of 0.8-2.0 nm. We believe that the present work would contribute to the development of SWNTs-based flexible functional devices.

• 대한금속재료학회지
• /
• 제48권2호
• /
• pp.175-179
• /
• 2010

We investigated the thermal conductivity of individual single-crystalline PbTe nanowires grown by chemical vapor transport method. Suspended MEMS was utilized to precisely measure the thermal conductivity of an individual nanowire. The thermal conductivity of a PbTe nanowire with diameter of 292 nm was measured to be $1.8W/m{\cdot}K$ at 300 K, which is about two thirds of that of bulk PbTe. This result indicates that the thermal conduction through a PbTe nanowire is effectively suppressed by the enhanced phonon boundary scattering. As the diameter of a PbTe nanowire decreases, the corresponding thermal conductivity linearly decreases.

• 한국표면공학회지
• /
• 제32권4호
• /
• pp.531-537
• /
• 1999

A copper based leadframe was oxidized in brown-oxide forming solution, then the growth characteristics of brown oxide and the effect of brown-oxide formation on the adhesion strength of leadframe to epoxy molding compound (EMC) were studied by using sandwiched double cantilever beam (SDCB) specimens. The brown oxide is composed of fine acicular CuO, and its thickness increased up to ~150 nm within 2 minutes and saturated. Bare leadframe showed alomost no adhesion to EMC, while once the brown-oxide layer formed on the Surface of leadframe, the adhesion strength increased up to ~80 J/$\m^2$ within 2 minutes. Correlation between oxide thickness, $\delta$ and the adhesion strength in terms of interfacial fracture toughness, $G_{c}$ was linear. Considering the above results, we might conclude that the main adhesion mechanism of brown-oxide treated leadframe to EMC is mechanical interlocking, in which fine acicular CuO plays a major role.e.

• Advances in concrete construction
• /
• 제16권4호
• /
• pp.189-203
• /
• 2023

This study investigates the bending and stability properties of cylindrical constructions, with a focus on their use in the design and implementation of sporting equipment. The work focuses on a cylindrical construction resembling nanomotors, similar to components seen in sports equipment, using mathematical modeling based on high-order beam theory and nonlocal strain gradient theory. The analysis provides important insights into the dynamic behavior of these systems, revealing light on the impact of numerous factors such as rotational velocity, section change rate, and structural dimensions. The results show a relationship between angular velocity growth and section change rate, which leads to an increase in fundamental frequency values. Furthermore, the research emphasizes the effect of structural factors on dynamic deflection, giving critical information for increasing the stability and performance of sporting equipment. This study adds to the area of sports engineering by providing a more nuanced understanding of how cylindrical constructions react under diverse settings. The results will help to guide the design and manufacturing processes of sports equipment, assuring improved stability and performance for players across a wide range of sports.

• Journal of Animal Science and Technology
• /
• 제45권4호
• /
• pp.577-584
• /
• 2003

본 연구는 급여사료의 단백질 수준과 고단백질 사료의 급여시기가 레드디어의 녹용생산성에 미치는 영향을 검토하기 위해 급여사료의 단백질 수준을 13%(LL구)와 19%(HH구)로 달리하였으며 또한 단백질 함량 19%의 사료 급여시기를 각각 낙각 전(HH구)과 낙각 시점(LH구)으로 달리하여 사양실험을 실시했다. 녹용의 주간 둘레는 상대, 중대 및 하대 부위의 둘레를 합산한 평균치로서 1998년과 1999년의 실험 모두 HH구에서 가장 높았으나 나머지 두 처리구와의 사이에 유의적인 차이는 인정되지 않았다(P>0.05). 녹용의 주간 길이 역시 2년간의 실험에서 모두 HH구가 가장 길었고 LH구가 가장 짧았으나 유의성(P>0.05)은 인정되지 않았다. 급여사료의 단백질 수준에 따른 처리간의 차이는 인정되지 않았으나 녹용의 주간 둘레와 길이는 각각 녹용생산에 밀접한(P<0.01) 관계가 있는 것으로 분석되었다. 녹용생산성에 있어서는 1998년의 경우 HH구가 평균 2,600$\pm$1,000g으로서 가장 높았고 LH구가 2,287$\pm$826g으로 가장 낮은 생산성을 나타냈으나 처리간의 유의성(P>0.05)은 인정되지 않았다. 1999년의 실험에서도 HH구가 평균 3,038 $\pm$867g으로 가장 높은 생산성을 보였으며 LH구가 2,739$\pm$1,079g으로 가장 낮은 생산성을 나타냈으나 역시 처리간에 유의성은 인정되지 않았다. 일당 녹용생산량은 1998년의 경우 HH구가 43$\pm$16g으로 가장 높았고 LH구가 38$\pm$15g으로 가장 낮았으나 처리간의 유의성은 인정되지 않았다. 또한 1999년의 실험에서도 같은 경향이 나타났다.

• 한국진공학회지
• /
• 제16권2호
• /
• pp.145-152
• /
• 2007

자외선 광여기 전자현미경 (Ultraviolet - Photoelectron Emission Microscopy: UV-PEEM)을 이용하여 Si (001)과 (113) 표면에 Ge을 증착하면서 실시간으로 나노구조의 형성과 크기 및 형태 변화과정을 조사하였다. Ge은 PBEM에 부착된 e-beam 증착기를 이용하여 $450-550^{\circ}C$ 온도에서 in situ로 증착하면서 표면의 변화를 PEEM으로 관찰하였다. Ge을 ${\sim}0.4\;ML/min$의 증착율로 ${\sim}4\;ML$ 이상 두께로 증착했을 때, 두 Si 표면에서 Ge의 균일한 변형층(strained layer) 위에 island 구조가 형성되었다. 초기에 형성된 원형 모양의 island는 연속적인 Ge 증착에 따라, ripening 과정에 의해 크기가 점차 성장되었고 밀도는 감소하였으나, 형태는 원형 모양을 유지하였다. 시료 성장 후 공기 중 AFM 측정 결과, Si(001) 표면에는 dome 형태의 Ge island가 Si(113) 표면에는 윗면이 평판하고 다면의 옆면을 지닌 island 구조가 형성됨이 확인되었다. 반면에 ${\sim}0.15\;ML/min$의 낮은 증착율로 Ge을 증착했을 때, Si(113) 표면에서 원형의 Ge island가 길죽한(elongated) 형태의 나노선 구조로 변형됨이 관찰되었다. 또한, 계속적인 Ge 증착 두께를 증가시킴에 따라 표면에는 새로운 island가 형성되지 않고, 기존의 island들이 점차 길이 방향으로 크기가 증가하면서 [$33\bar{2}$] 방향으로 배열하였다. 이와 같은 Ge 나노구조의 형성과 형태 변화는 나노구조 형성과정에서 변형이완(strain relaxation)과 가원자(adatom)의 표면 동역학적 효과와 깊은 관련이 있는 것으로 분석된다.

• Journal of Nutrition and Health
• /
• 제8권4호
• /
• pp.9-14
• /
• 1975

Growth retardation and a variable degree of body disproportion are recognized features of malnutrition, and mild and moderate protein-calorie malnutrition(PCM). Among the various body measurements suggested to assess the prevalence of all grades of PCM as judged by growth retardation and by body disproportion, the 'mid-upper-arm circumference'-abbreviated to 'arm-circumference' has been suggested as a potential useful simple field index for the assessment of PCM showing that the measurement would give composite information simultaneously on three important effects on PCM-deficit in the muscle protein reservoirs, availability of calorie stores in the form of subcutaneous fat, and growth failure. And this is selected because of its easy accessibility, and less involvement with clinical edema. This study is conducted to make a comparison between the percentage of Korean weight for age standards and the percentage of mid-upper-arm circumference for age standards of 175 preschool children aged $3{\sim}72$ months who are selected among the low-income residents in Seoul. In this study, a comparison is made between the results obtained by expressing the observed weight of the child as a percentage of Korean standard, referred to as 'weight-for-age' and the observed arm-circumference expressed as a percentage of the age-specific arm standard of Jelliffe, referred to as 'arm-for-age'. All the measurements were taken following the techniques described by Jelliffe. The left mid upper arm was measured using a glass-fibre tape and the Fairbanks Morse beam balance was used for weighing. 80% level of weight for age Korean standard and 85% level of arm for are Jelliffe standard were used as an upper borderline limit for PCM. Comparing the 80% weight-for-age and the 85% arm-for-age standard as an upper limit for PCM, for children aged $3{\sim}72$ months, results in 84.6% agreement with the sensitivity of 86.4% and its specificity of 83.5%. If arm circumference alone had been measured and judgement made on this basis, then only 5.1% of the children would have been 'wrongly' classified. And there is a moderately close correlation between arm circumference and weight for age as the data in Table 4 shows. The problem therefore lies in the standard for arm circumference in normal children and in determining what is the lower limit of normal. Once this is clearly difined, one can rely more confidently on arm circumference measurements alone for the nutritional assessment of early childhood.