• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.276-284
• /
• 1998

Optimum design of bumper beam is investigated using nonlinear CAE structural analysis techniques.In order to minimize its weight, while enhancing structural performances, bumper beam structural analyses were carried out to produce optimum section. Model is composed of bumper beam and stay. First, considering FMVSS safety standard, static strength and energy absorbing capability were estimated for several competitive bumpers through pendulum static analysis, and most promising section was chosen. Next, to ensure dynamic crashworthinesss performance for center pole impact was evaluated for the bumper beam with chosen section through pendulum static analysis, referring to DHS bumper dynamic impact standard. Finally, 2.5 mph bumper beam was designed and its structural performance was estimated. Through this investigation, an optimized bumper beam section with less weight of 20% while maintaining almost equal carshworthiness, compared with a conventional bumper beam section which proved its impact crashworthiness by experiments, was developed.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.221-229
• /
• 2004

In this work, an elastic-plastic stress analysis has been conducted for silicon carbide fiber reinforced magnesium metal matrix composite beam. The composite beam has a rectangular cross section. The beam is cantilevered and is loaded by a single force at its free end. In solution, the composite beam is assumed perfectly plastic to simplify the investigation. An analytical solution is presented for the elastic-plastic regions. In order to verify the analytic solution results were compared with the finite element method. An rectangular element with nine nodes has been choosen. Composite plate is meshed into 48 elements and 228 nodes with simply supported and in-plane loading condations. Predictions of the stress distributions of the beam using finite elements were overall in good agreement with analytic values. Stress distributions of the composite beam are calculated with respect to its fiber orientation. Orientation angles of the fiber are chosen as $0^{circ},\;30^{circ},\;45^{circ},\;60^{circ}\;and\;90^{circ}$. The plastic zone expands more at the upper side of the composite beam than at the lower side for $30^{circ},\;45^{circ}\;and\;60^{circ}$ orientation angles. Residual stress components of ${\sigma}_{x}\;and \;{\tau}_{xy}$ are also found in the section of the composite beam.

• Computers and Concrete
• /
• 제27권2호
• /
• pp.85-97
• /
• 2021

In this study, the effect of steel fiber utilization, boundary conditions, different beam cross-section, and length parameter are investigated on the free vibration behavior of fiber reinforced self-compacting concrete beam on elastic foundation. In the analysis of the beam model recommended by Euler-Bernoulli, a method utilizing Stokes transformations and Fourier Sine series were used. For this purpose, in addition to the control beam containing no fiber, three SCC beam elements were prepared by utilization of steel fiber as 0.6% by volume. The time-dependent fresh properties and some mechanical properties of self-compacting concrete mixtures were investigated. In the modelled beam, four different beam specimens produced with 0.6% by volume of steel fiber reinforced and pure (containing no fiber) SCC were analyzed depending on different boundary conditions, different beam cross-sections, and lengths. For this aim, the effect of elasticity of the foundation, cross-sectional dimensions, beam length, boundary conditions, and steel fiber on natural frequency and frequency parameters were investigated. As a result, it was observed that there is a noticeable effect of fiber reinforcement on the dynamic behavior of the modelled beam.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.76-84
• /
• 1997

초기설계 단계에서는 선체구조 강도의 신속한 해석을 위해 보요소를 사용한 유한요소 해석이 일반적으로 사용된다. 선체구조를 보요소로 모델링할 때, 브라켓은 해석의 간편화를 위해 강체 요소로 표시된다. 강체 단부의 길이(=span point)는 세 가지 관점 - 굽힘, 전단, 축 변형 - 에 따라서 결정된다. 본 논문에서는, 새로운 2차원 보요소를 개발하였고, 2차원 해석으로 3차원 해석을 대신할 수 있는 방법을 제안하였다. '강체 단부 보요소' 라고 명명된 이 보요소는 한 요소 내에서 세 종류의 span point 효과를 모두 고려할 수 있는데, 이것은 보통의 보요소에서는 불가능한 것이다. 강체 단부 보요소를 사용한 Portal frame 해석결과는 membrane 해석결과와 잘 일치한다. 그리고, 영향계수를 사용한 2단계 해석을 포함하는 준 3차원 해석결과는 좋은 정확도를 보이고 있다. 강체 단부 보요소와 준 3차원 해석방법을 사용한 구조해석은 브라켓에 해당하는 요소가 필요치 않고, 3차원 해석을 단순화시킬 수 있었기 때문에 좋은 계산효율을 가진 것으로 판명되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.619-624
• /
• 2007

Spectral element method (SEM) is introduced for the fully coupled structural dynamic problems, In this paper, the beam with passive constrained layered damping (PCLD) treatments is considered as a representative problems. The beam consists of a viscoelastic layer that is sandwiched between the base beam structure and an elastic layer, The fully coupled equations of motion for a PCLD beam are derived, The equations of motion are derived first by using Hamilton's principle, From this equations of motion, the spectral element is formulated for the vibration analysis by use of the SEM, As an illustrative example, a cantilevered beam is considered. It is shown that, as the thickness of VEM layer vanishes, the results become a simple layer beam's that.

• 한국해양공학회지
• /
• 제18권2호
• /
• pp.52-57
• /
• 2004

Preflex beam is a method of construction designed to hold the pre-compressive stresses over the concrete pier by the preflexion load. During the fabrication of the girder, welding causes residual stresses. The welding residual stresses must be relieved in order to generate the accurate compressive pre-stresses. In this study, to determine the thermal distribution characteristics on the girder by welding, both three-dimensional finite element analysis and two-dimensional finite element analysis, in a quasi-steady state, is carried out. After comparing each result between the three-dimensional analysis and the two-dimensional analysis, finite element analysis is carried out against the actual girder, and the welding thermal distribution characteristic over the preflex beam is analyzed. It is possible to provide the input data for the analysis of the welding residual stresses.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.116-124
• /
• 2008

본 연구에서는 원형수직구 굴착에 따른 Ring Beam의 거동을 평가하기 위하여 현장계측 자료의 분석과 평가, 굴착심도 변화에 따른 Ring Beam의 응력 특성 등의 비교분석을 구조해석에 기초하여 평가하였다. 그 결과, Ring Beam의 거동은 현장계측 및 구조해석 결과에서 유사한 경향을 나타내는 것을 알 수 있었다. 이로부터 굴착심도 변화에 따른 Ring Beam 거동은 본 연구에서 제안한 구조해석에 의해 예측할 수 있는 것을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제21권4호
• /
• pp.401-410
• /
• 2008

보의 고유진동수는 진동해석 뿐만 아니라 구조물의 동적특성을 파악하는데 중요한 역할을 한다 보의 단면이 불연속적으로 변하는 계단형 보의 고유진동수 해석은 복잡하다. 이런 계단형 보의 진동해석은 Rayleigh-Ritz법, FEM 등과 같은 근사해석법이 흔히 사용되는데 이들 해석의 정확성은 분할요소의 수, 계산의 반복수, 가정처짐곡선의 형상에 따라 좌우된다. 본 연구에서는 계단형 외팔보의 등가보 변환 방법을 이용한 기본고유진동수의 근사해석방법을 제시하고자 하였으며 여러 예제에 대하여 제안방법과 유한요소해석 결과를 비교하여 그 적용성과 신뢰성을 검증하였다.

• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.559-576
• /
• 2014

A new mathematical model and its finite element formulation for the non-linear stress-strain analysis of a planar beam strengthened with plates bolted or adhesively bonded to its lateral sides is presented. The connection between the layers is considered to be flexible in both the longitudinal and the transversal direction. The following assumptions are also adopted in the model: for each layer (i.e., the beam and the side plates) the geometrically linear and materially non-linear Bernoulli's beam theory is assumed, all of the layers are made of different homogeneous non-linear materials, the debonding of the beam from the side-plates due to, for example, a local buckling of the side plate, is prevented. The suitability of the theory is verified by the comparison of the present numerical results with experimental and numerical results from literature. The mechanical response arising from the theoretical model and its numerical formulation has been found realistic and the numerical model has been proven to be reliable and computationally effective. Finally, the present formulation is employed in the analysis of the effects of two different realizations of strengthening of a characteristic simply supported flexural beam (plates on the sides of the beam versus the tension-face plates). The analysis reveals that side plates efficiently enhance the bearing capacity of the flexural beam and can, in some cases, outperform the tensile-face plates in a lower loss of ductility, especially, if the connection between the beam and the side plates is sufficiently stiff.

• 한국건설안전학회 논문집
• /
• 제2권1호
• /
• pp.21-27
• /
• 2019

현재 건축물의 높이가 높아지고 우리나라 가구 형태가 개인 주택에서 아파트로 변화함에 따라 타워크레인의 사용 횟수는 계속해서 증가하고 있다. 그러나 이처럼 증가하는 타워크레인 사용 횟수에 반해 우리나라 타워크레인 관련 정책은 매우 미비한 실정이다. 특히 타워크레인과 관련된 사고의 원인 중 가장 큰 비중을 차지하는 타워크레인 연식에 대한 기준은 그 설정 근거가 부족하다. 따라서 본 연구에서는 이와 같은 문제점에 주목하여 타워크레인의 보다 신뢰성 있는 타워크레인의 연식을 설정하는 연구를 진행한다. 이를 위해 본 연구에서는 기존 연구에서 사용했던 사례와 영국 타워크레인 기준을 바탕으로 사용 연식을 설정한다.