• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.102-107
• /
• 2014

SCR(Thyristor) type $CO_2$ welders have widely used for the welding process of heavy industries such as shipbuilding and plant. Since the industrial fields of shipbuilding and plant are usually exposed to severe welding condition with lots of dust, extreme temperature, high humidity and vibration, it is not recommended to use inverter type welder despite its state-of-the-art technology. Many sophisticated functions in the inverter welder may not work due to malfunction of its sensitive components. Hence this study focused on digitalization of SCR $CO_2$ welder by making use of microprocessor for SCR phase control. By this application, fine control of output of the $CO_2$ welding systems is achieved. Also pulse output mode of operation is realized and its verification is carried out with aluminum sample welding. The experimental results showed sound weld bead. The front operation panel provide user with numerical parameter settings and monitors. It will help precise weld process monitoring and control with digital value.

• Journal of Welding and Joining
• /
• 제25권4호
• /
• pp.42-48
• /
• 2007

An inert gas atomized NiTiZrSiSn bulk metallic glass feedstock was sprayed onto the copper plate using vacuum plasma spraying process. In order to change the in-flight particle energy, that is, thermal energy, the hydrogen gas flow rate in plasma gas mixture was increased at the constant flow rate of argon gas. Coating and single pass spraying bead were produced with the least feeding rate. Regardless of the plasma gas composition, fully melted through unmelted particle could be observed on the overlay coating. However, the frequency of the unmelted particle number density was increased with the decrease of the hydrogen gas flow rate. The amorphous phase fraction within coating was also affected by the number density of the unmelted particle.

• 한국수산과학회지
• /
• 제52권3호
• /
• pp.256-267
• /
• 2019

Styrofoam beads, which are relatively inexpensive and can provide a large specific surface area, were tested as filter media. Styrofoam beads with a diameter of $3{\pm}0.5mm$ were used; the specific surface area of the beads was $1,034m^2{\cdot}m^{-3}$. Five independent recirculating culture systems were used in the experiment. Each system consisted of one culture tank and three trickling bio-filters. Using the systems, nitrification efficiency was evaluated with respect to hydraulic loading rate (HLR) and carbon/nitrogen (C/N) ratio. The lowest ammonia and nitrogen concentrations were $0.84mg{\cdot}L^{-1}$ and $1.30mg{\cdot}L^{-1}$, respectively, observed at an HLR of $50.9m^3{\cdot}m^{-2}{\cdot}h^{-1}$. Nitrification efficiency in the culture tank was highest at a C/N ratio of 0, with ammonia and nitrite nitrogen concentrations of $0.32mg{\cdot}L^{-1}$ and $0.90mg{\cdot}L^{-1}$, respectively. Ammonia and nitrite nitrogen concentrations in the culture tank abruptly changed at C/N ratios ${\geq}3$.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.34-38
• /
• 2003

It has been used many kinds of horizontal butt-welding methods at block-to-block erection stage in shipbuilding companies. For examples, some companies use conventional FCAW process with one side or both sides groove joint welding, others use carriage with torch holder type mechanized welding method. Although lots of efforts were done until now, some problems in quality and productivity still remain in ship's hull welding. In this study, we have attempted to raise productivity and quality on horizontal position of welding with following 3 items. 1) Prepare groove condition with no root gap for making easy fit-up work. 2) Develop improved MAG (100% $CO_2$ gas shielding) welding process with solid wire for making sound root bead from one side. 3) Develop and apply quite new automatic welding carriage. The stability of new welding process was confirmed by conducting mechanical tests of weldments to verify the soundness of weldments.

• 한국안광학회지
• /
• 제9권1호
• /
• pp.181-188
• /
• 2004

모노비전은 한눈은 원용 시력을 위해 다른 눈은 근용시력을 위해 양안에 콘택트렌즈를 교정한 형태를 말한다. 단초점 콘택트렌즈가 각 눈에 이용되는데 환자는 다른 눈을 사용하는 동안 한 눈을 선택적으로 억제한다. 본 연구는 젊은 학생에게 +3.00D 가입시켜 인위적으로 유도된 모노비전의 양안시 기능과 환자 만족도를 측정하기 위해 시행하였다. 144명의 대학생을 대상으로 우위안 검사를 하여 비우위안에 +3.00D를 가입하여 원용 교정안경을 양안에 장용시켰다. 모노비전의 양안시 기능을 조사하기 위해 입체시 검사를 포함하여 장애물 코스, 물부어 담기, 던지기와 받기, 구슬 분류하기를 시행하여 정상 양안시 상태와 비교하였다. 그 결과 입체시는 현저하게 저하되었지만 장애물 코스, 물부어 담기, 던지기와 받기, 구슬 분류하기 등 양안시 기능에 대한 결과에는 차이가 거의 없었다. 따라서 본 연구를 통해 콘택트렌즈 모노비전은 환자 선택과 임상적 지식을 활용하여 처방하면 노안 교정을 위한 효과적이고 권장할 만한 방법이라는 것을 알 수 있었다. 그리고 이와 같은 방법을 응용하여 학생들의 모노비전에 대한 이해를 높이는 실습에도 효과적으로 활용될 것으로 사료된다.

• 한국자기학회지
• /
• 제25권5호
• /
• pp.162-168
• /
• 2015

광 리소그래피 공정을 이용하여 반강자성체 IrMn 층을 기반으로 하는 GMR-SV(giant magnetoresistance-spin valve) 소자 위에 ${\mu}m$ 선폭 크기의 코일을 적층하여 미크론 크기 코일을 제작하였다. GMR-SV 박막일 때와 소자 제작 후의 자기저항비와 자장감응도는 각각 4.4 %, 2.0 %/Oe와 1.6 %, 0.1 %/Oe로 나타났다. 여러 개의 $1{\mu}m$ 크기인 자성비드가 붙은 적혈구 바로 아래 위치에 놓일 소자와 10번 감은 미크론 크기 코일에 흐르는 AC 및 DC 전류 크기에 따른 자기장 분포를 유한요소법 전산모사로 분석하였다. 코일 중심인 $z=0{\mu}m$에서 주파수 20 kHz인 AC 전류가 0.1 mA에서 10.0 mA로 증가하면 이 값에 비례하여 자기장의 크기는 $30{\mu}T$에서 $3060{\mu}T$로 증가하였다. 그리고 코일 중심에서부터 $z=10{\mu}m$에서 자기장 크기는 $z=0{\mu}m$인 중심에서 보다 1/6배로 줄어들었다. 미크론 크기 코일에 흐르는 전류에 의해 생성되는 자기장은 적혈구 포획용으로 충분한 크기를 갖고 있어서 검출용 바이오센서로 활용 가능함을 확인 할 수 있었다.

• 대한수의학회지
• /
• 제43권2호
• /
• pp.203-210
• /
• 2003

The purpose of this study is to investigate the pharmacokinetics and tissue distribution of recombinant bovine somatotropin (rBST) after subcutaneous adminstration of $^{125}I-rBST$ in male and female rats. A solid state conjugation (Iodo-bead$^{(R)}$) method was confirmed useful for producing $^{125}I-rBST$ because the administration of the conjugated form enabled enough to determine time- concentration relationships of rBST in rats. Subcuatenous administrations showed sex differences that female ($t_{1/2,kc}$, 2.87 h) revealed rapid elimination as compared to male ($t_{1/2,ke}$, 4.81 h), with the absorption ($t_{1/2,ka}$ in male being 0.3 h and that in female 0.75 h) in the reverse order. For subcutaneous administration of rBST in male rats, the liver was the highest in amount, followed by kidney, testes, muscle, and stomach, at the slaughtering tame of 1, 6, 12 and 24 h. But the testes was the highest at the 48 h slaughtered animals, followed by liver, kidney, stomach, and muscle. In slaughtered females at 1, 6, and 12 h after the administration of rBST, the liver was the highest, followed by ovary, kidney, small intestine, and stomach. At 24 and 48 h slaughtered female rats, the ovary was the highest, the liver the second, and the kidney the third.

• 대한토목학회논문집
• /
• 제12권1호
• /
• pp.207-217
• /
• 1992

본 연구에서는 기체 액체 고체의 직접접촉이 일어나는 3상 유동층 반응기를 이용하여 유입상승 유속에 의한 공극률의 변화와 생물막의 두께 및 밀도를 관측하였다. COD의 용적부하율은 반송비(r=0.2, 0.4, 0.6)로 조절하여 $201.12-1150.8g/m^3{\cdot}d$로 하였으며, 고체 매질로는 연탄재입자(평균유효입경 : 1.34 mm)와 유리비드(3 mm)를 사용하여, 매질의 차이에 따른 반응기의 효율에 대하여 비교하였다. 그 결과 반송비를 일정하게 고정시킨 경우, 연탄재 매질에 의한 생물막의 두께가 유리비드를 사용한 것보다 약 4.8배 두꺼우며, COD 제거 효율은 두 매질사이에는 변화가 거의 없으나, 암모니아성 질소의 제거에는 연탄재의 경우가 약간 높았다. 반응조내의 식종균으로는 합성폐수와 유사한 배지에서 동정 분리하여낸 토양미생물을 이용하였다 이 토양미생물은 기존의 활성슬러지균 보다 점착력과 침강성이 뛰어났다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.661-667
• /
• 2002

Welding-induced buckling distortion is one of the most problematic concerns in both design and fabrication of welded thin-plate structures. This paper deals with experimental and numerical results of the welding-induced longitudinal and/or buckling distortion occurring in welding of 6mm-thick AH36 high strength steel plates. Effects of the heat input and the plate size on the distortion were experimentally evaluated for square plates. Bead-on-plate welding was performed with the submerged arc welding process along the middle line of plate specimens. Experimental results showed that the longitudinal distortion made a single curvature in the plate, and the distortion magnitude along the weld centerline was proportional to the heat input and the plate size. The experimental results were used to examine the validity of the numerical simulation procedure for welding-induced distortion where the longitudinal distortion mode and magnitude were numerically quantified. Three-dimensional, large deformation, welding simulations were performed for selected weld models. Numerical results of the distortion mode and magnitude were in a good agreement with experimental ones. Depending on the presence of halting the distortion growth during the cooling cycle of welding, the condition discriminating buckling distortion from longitudinal distortion was established. Eigenvalue analyses were performed to check the buckling instability of tested plates with different sizes subjected to different heat inputs. The perturbation load pattern for the analysis was extracted from longitudinal inherent strain distributions. Critical buckling curve from the eigenvalue analyses revealed that the buckling instability is manifested when plate size or heat input increases.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권2호
• /
• pp.775-781
• /
• 2015

Background: RB1 (retinoblastoma 1) was reportedly one of the major determinative factors for sensitivity to taxanes in previous studies. In this study, we investigated the influence of RB1 single nucleotide polymorphisms (SNPs) on the efficacy of platinum-taxane regimens in advanced NSCLC patients. Materials and Methods: 234 cases of patients with advanced NSCLC who were treated with first-line platinum-taxane agents were enrolled in this study. Genomic DNA was extracted from patients' peripheral blood samples using a QIAamp DNA Maxi Kit, and genotyped by iSelect HD Bead-Chip. Results: Regression analyses were conducted through the univariate and multivariate Cox proportional hazards model in the 234 patients. The results showed that of the eight RB1 tagSNPs, only rs4151510 was a positive predictive factor for the advanced NSCLC patients treated with platinum taxanes regimen. The patients with G/G genotype of RB rs4151510 had longer overall survival (OS) than the non-G/G genotype (p=0.018). The histology was also correlated with OS in the whole advanced NSCLC patients. Three tagSNPs of RB1, rs4151510, rs4151465, rs9568036 were significantly associated with OS in the advanced NSCLC patients with squamous cell histology using Kaplan-Meier overall survival analysis stratified by histology. Conclusions: RB1 genomic variants were correlated with the efficacy of platinum-taxanes regimen. RB rs4151510 is an independent factor of the prognosis of NSCLC patients receiving platinum-taxane chemotherapy.