• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.224-228
• /
• 2012

We have developed new materials that lead to methyl meth acrylate monomer and styrene monomer to using polymerization method. The materials have a powder form and show liquid behavior. We call the "Electronic Bead". An our experiment, a positive-charged particle has $TiO_2$, polymer and CCA(-), while a negative-charged particle consists of carbon black, polymer and CCA(+). The charged particles have electrical characteristic of white -10 uC/g and black 10 uC/g, respectively. Also, these particles have good fluidity by additive of nano-sized silica. Using these materials, we demonstrated prototype displays that have $320{\times}320$ array of pixels and 6-in-diagonal viewable image size, driven by passive-matrix addressing. The reflectivity shows about 30% even though our experiment is at the beginning point. Also, the panel has contrast ratio 6:1. We think there are many chances to improve reflectivity through modifying components of particle resin, mixture ratio of each particle, panel structure and so on.

• Journal of Pharmaceutical Investigation
• /
• 제25권1호
• /
• pp.37-46
• /
• 1995

The experiment was designed to investigate the sustained release dosage form of silymarin (SL) from chitosan (CS) carrier. Solid dispersed system was prepared by mixing the drug with chitosan. This solid dispersed system was cross-linked by glutaraldehyde, formaldehyde, acetaldehyde and butylaldehyde, respectively. The dissolution rates of these preparations were compared with each other in vitro. The silymarin was mired with anionic alginate gel and bead was prepared by dropping this mixture to cationic chitosan solution including calcium chloride. Chitosan encapsulated alginate bead after drying in the oven was investigated for the dissolution rate. The dissolution rate of SL-CS mixture was delayed with increase in the amounts of CS and the concentration of aldehyde. The effect on the delay of dissolution rate was in the increasing order of formaldehyde, glutaraldehyde, acetaldehyde, butylaldehyde. The dissolution rate of chitosan encapsulated alginate bead was parallel with the concentration of chitosan in diluted hydrochloric acid solution and delayed with increase in the concentration of chitosan in phosphate buffer solution.

• 한국정보통신학회논문지
• /
• 제18권4호
• /
• pp.818-824
• /
• 2014

최단강하선 문제의 해는 cycloid 형태라는 것이 밝혀졌으나, bead의 정확한 각도 값은 복잡한 비선형방정식의 역관계를 테이블 형태로 구해야 얻을 수 있다. 본 논문에서는 이러한 근사해의 정확도를 높이기 위해 신경회로망을 이용하여 비선형방정식의 역관계식을 표현하였고, 신경회로망의 보간 기능으로 인해 높은 정확도의 최단시간제어가 가능하였다. 여러 가지 최종목표점에 대한 컴퓨터 시뮬레이션을 통해서 본 논문에서 제안한 방법이 기존의 방법보다 우수함을 확인할 수 있었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.97-99
• /
• 2005

Laser arc hybrid process is actively researched as a new welding method since it has several advantages by the combination of laser beam and electric arc. By the coupling of two different heat sources, laser and arc mutually assist and influence. High power laser can make the deep keyhole and arc plasma can form the large bead shape. In this paper the effect of two different heat sources to weld bead are investigated and as a result of analysis, it is shown that the lower part of keyhole is heated by laser and the upper part of weld pool is dominantly heated by arc.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2004년도 정기총회 및 제33차 춘계 학술대회
• /
• pp.384-387
• /
• 2004

The purpose of the present investigation was to develop a novel method for cell immobilization. Aureobasidium pullulans cells were mixed with an alginate solution, and the mixture was extruded to form small gel beads as hydrated- immobilized cells. The beads were then placed at $-15^{\circ}C$ for 6-24 h to induce freeze-dehydration. The freeze-dehydration resulted in shrinkage of beads due to water removal reducing bead volume by 82% and bead weight by 85%. The dehydrated beads were successfully used for the production of fructo-oligosaccharides in a model reactor system. This study showed that bioreactor performance can be improved up to 2 times by the use of the dehydrated beads.

• 대한조선학회지
• /
• 제17권2호
• /
• pp.21-32
• /
• 1980

The welding distortions, transverse shrinkage and angular change, on the butt welded joint made by the process of shielded metal arc welding, were studied on the basic study of bead on plate weld. On the study of bead on plate weld, the temperature distribution on the plane normal to the direction of the weld line was assumed to be parabolic. The form of the distortion formulas of welded joint for transverse shrinkage and angular change were derived theoretically. Also, the experiments were performed about three cases, for changing type, sizes of welding electrodes and types of grooves, welding on mild steel plate, to compare theoretical study and experiments. It was found that the theoretical study was in good agreement with the result of experiment. Also, the optimal welding conditions for reducing weld distortions were suggested.

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.39-45
• /
• 2022

Sheet Metal Forming by Press Forming Process takes a lot of time and cost from mold design to manufacturing. Therefore, all of die-makers are continuously conducting research to reduce the number of mold processes or the size of blanks to reduce costs. In the case of Forming complex shapes such as automobile component, wrinkles and cracks occur, so draw beads are used. Draw beads play an important role in suppressing the inflow of materials and minimizing the size of blanks. Factors that affect material flow include draw bead, blank holding pressure, lubricant, and surface roughness of punch and die. Most of the factors affect friction. In this study, after classifying circular beads and rectangular beads in cylindrical drawing molds using the AutoForm analysis program, the factors affecting the material inflow were considered.

• Archives of Metallurgy and Materials
• /
• 제65권3호
• /
• pp.1069-1072
• /
• 2020

Mortar feedstock is extruded to form bead and it is selectively placed line by line in the material extrusion additive manufacturing. With respects to part building process healthiness, load-supporting ability of overlaid beads is emphasized as buildability. Buildability is primarily dependent on thixotropic properties of feedstock and vertical overlapping schedule. In the present study, water-to-binder (w/b) ratio was chosen as material aspect to assess buildability. Uneven bead shape evolution and premature failure were highlighted owing to low yield stress of high w/b ratio feedstock. Feedstock with optimum w/b ratio showed good buildability even at the interval time of 19 sec.

• 한국응용과학기술학회지
• /
• 제29권4호
• /
• pp.599-609
• /
• 2012

이 연구의 목적은 버려진 굴 패각을 재활용하여 감소시키는 것으로 굴 패각과 해조펄프를 이용하여 식품의 보존에 대한 항산화비드를 활용하는데 있다. 이 연구는 두 부분으로 나누었다. 첫 번째는 파일럿 규격조건으로 설계하고 제조하였다. 둘째는 [A],[B],[C-a],[C-b]화합물에 대한 최적제조 조건을 다루어 확립하고 이들 생성물을 분석하였다. 파일럿 규격 제조는 해조펄프의 분자수식합성과/Cl-전분 그리고 그의 다양한 비드 형태들이 극성용매에서 다양한 중량비율로 액상 혼합하여 제조되었다. 부가적으로, 혼합과정에서 해조펄프의 비율이 증가함으로서, 해조펄프/Ag-굴 패각을 섞인 것의 항균성은 감소되었으나 항산화와 비드의 견고성 성질은 증가되었다. 파일럿 규격의 생성라인은 해조 펄프와 Cl-전분을 분자수식으로 합성하였다. 그리고 극성용매를 사용하여 여러 가지 중량비율로 다양한 형태의 비드를 제조하였다.

• Journal of Welding and Joining
• /
• 제11권2호
• /
• pp.74-85
• /
• 1993

Effect of Si metal powders addition with the plasma transferred arc(PTA) overlaying process on characteristics of the alloyed layer in aluminum alloy(A5083) has been investigated. The overlaying conditions were 175-250A in plasma arc current, 500mm/min in travel speed, the 5-20g/min in powder feeding rate. Main results obtained are summarized as follows. 1)Sufficient size of molten pool on surface of base metal was required for forming an alloyed layer; in a fixed travel, the formation of alloyed layer with clear and beautiful surface depend upon the plasma arc current and powder feeding rate; the greater plasma arc current and the smaller powder feeding rate were, the better bead was formed. Optimum alloyed conditions by which an excellent alloyed bead obtained was 225A in plasma arc current. PTA process made it possible to form an alloyed layer with up to 67wt% Si. 2)Microstructure in the alloyed layer was in accord with prediction from the Al-Si phase diagram 3)The hardness of the alloyed layer increased in proportion to Si content. 4)As volume fraction of primary Si increased, the specific wearness of the alloyed layer was significantly improved. However, no further improvement was found when the volume fraction was greater than about 30%. 5)Utilizing the PTA process, a crack free alloyed layer with maximum hardness of about Hv 310 could be obtained.