• Journal of Korean Biological Nursing Science
• /
• v.19 no.3
• /
• pp.151-157
• /
• 2017

Purpose: The purpose of this study was to identify the effects of hand and foot baths on sleep and body temperature of the elderly. Methods: The research was designed for a nonequivalent control group before and after the test design. The subjects of this study totaled 43, aged 65 and over (23 people in hand bath group and 20 people in a foot bath group), who received a written voluntary consent to participate in experimental treatment and are in the W care center, S Nursing Home, and H care center in Seoul. Data were collected with questionnaires and observations, and were analyzed on the basis of frequency, percentage, mean, standard deviation, ${\chi}^2-test$, Fisher exact test, t-test and paired t-test. Results: There are no significant differences in homogeneity test of a dependent variable between groups (hand bath, foot bath). The differences between 2 groups on the sleep quality score and systolic blood pressure, diastolic blood pressure temperature were not significant statistically except on the pulse. Conclusion: Based on the results of this study, hand bath is as efficient as foot bath. Therefore, a hand bath can be a nursing intervention in order to enrich sleep quality for the elderly because a hand bath is more convenient than foot bath.

• Journal of the Korean institute of surface engineering
• /
• v.12 no.2
• /
• pp.75-83
• /
• 1979

The Rates of formation and heats of activation for the intermatallic Compound Layers between Cold rolled sheet and molten aluminium &ath (adding small amounts of silicon) has been determined by Continous aluminizing method in the temperature range of 680$^{\circ}$ to 760$^{\circ}C$ and with immerssion time. The structure of the intermetallic Compound Layers was the shape of "Tongues" in pure Al-Bath and Al-Bath Containing 1% Si, But in Al-5% Si Bath was "Band" the Composition of the intermetallic Compound Layers were checked by microhardness measurements and X-Ray probe micro analyzer. FeAl intermetallic Compound layer was found to be uniform in pure Al-Bath and Al-5% Si Bath, But Fe Al intermetallic Compound Layer was shown in Al-1% Si Bath. The growth Rates of the intermetallic Compound Layers was most rapidly increased at Temperatures from 720$^{\circ}$ to 760$^{\circ}C$, at the immorsion time above 60 Second in pure Al-Bath, But in Al-1% Si Bath was solwly increased for the same conditions, and then in Al-5% Si Bath was hardly effected by these experimental condition. Heasts of activation of 29, 46 Kcal per mole which calculuted from Layer growth experiments were found in pure Al-Bath, Al-1% Si Bath respectively.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.17-20
• /
• 2002

Various compositions of CoFeNi alloys have been electrodeposited in chloride bath and in sulfate bath, and evaluated for electrodeposition characteristics and magnetic properties. For electrodeposited CoFeNi thin film alloys, the increase of Fe content in the deposits from sulfate bath was considerably faster than those from chloride bath. The current efficiencies in sulfate bath showed observable decrease from $75\%\;to\;50\%$ while those in chloride bath showed no significant decrease. From the low coercivity of 3 Oe in the minimum and the higher squarenesses of the alloys from sulfate bath than those from chloride bath, the alloy at Co, Fe, and Ni contents of $80wt.\%,\;10wt.\%,\;and\;10wt.\%$ can be considered to be the best CoFeNi alloy in this research for the soft magnetic material.

• Physical Therapy Korea
• /
• v.3 no.2
• /
• pp.49-54
• /
• 1996

The purposes of this study were to measure skin temperature and blood flow on the contralateral upper extremity when heat is applied to one upper extremity, were to compare the effect of contrast bath. The subjects were 38 healthy adults with no history of peripheral vascular disease. The subjects of contrast bath were 18 persons and the subjects of warm bath were 20 persons. The subjects of one group were seated with their right arm in water($42^{\circ}C$) up to the mid-forearm. The subjects of the other group were seated with their right arm up to the mid-forearm in water which was changed from warm to cold using the contrast bath technique. The continually changing temperatures and blood flow were measured by an independent observer at intervals of 10, 15, 20, 25 and 30 minutes respectively after the start of the procedure. The results were as follows. The temperature of the warm bath group rose 4.28% over the pre-experimental temperatures and the temperature of the contrast bath group rose 3.41%. There was no statistically significant difference between the two groups. The blood flow of the warm bath group rose 8.31% over the pre-experimental blood flow and the blood flow of the contrast bath group rose 17.24%. There was a statistically significant between the two groups 20 minutes after the start of the procedure. Thus the contrast bath is a more effective method than the warm bath to increase blood flow.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.169.1-169.1
• /
• 2008

• Journal of the Korean institute of surface engineering
• /
• v.27 no.6
• /
• pp.319-326
• /
• 1994

The effects of electrolysis conditions on the composition and preferred orientation of Ni-Fe alloy were studied using the sulfate-chloride baths paddle agitated. Cathode current efficiency is higher in the deposits from bath 2 than that of deposits from bath 1. The Fe content of alloy deposits from bath 2 is nearly constant(19∼21wt.%) in the wide range of current density, while it decreases noticeably with current density in the deposits from bath 1. The variation of Fe content at the edge of specimen is lower in deposits from bath 2 than those from bath 1. The alloy deposits show (111) & (200) preferred orientation for the deposits from bath 1 and bath 2 respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.133-144
• /
• 1988

Silk fabrics were degummed and dyed in one bath under the condition of high temperature and high pressure and the results obtained were summerized as follows. 1. The degumming ratio is nearly the same as that of two bath method under the normal condition and the optimal condition is for 30 minutes at $120^{\circ}C$. 2. The dyeing absorption ratio is a little lower than that of two bath method. 3. The tensile strength and elongation are hardly shown the difference between two methods. 4. The fastness of the dyed fabric of one bath method is a little better than that of two bath method. (light, washing, rubbing) 5. The stiffness of the silk fabric treated by one bath method is a little harshier compare to that of two bath method.

• Journal of the Korean institute of surface engineering
• /
• v.19 no.1
• /
• pp.3-12
• /
• 1986

Influences of pH, temperature, and composition of bath on the deposition rate and the magnetic properties were studied for two kinds of electroless Co-P plating bath. The results obtained are as follows. Ammonia alkaline citrate bath was more stable than ammonia alkaline tartrate bath, and the film deposited from citrate bath gave a higher squareness. The magnetic properties of the film obtained from citrate bath greatly depended upon pH. Under the optimum conditions, the film deposited from citrate bath had coercive force of 330 Oe and squareness of 0.67. However the films deposited from tartrate bath had coercive force of 300 Oe and squareness of 0.58.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.35-40
• /
• 2020

In this study were carried out basic experiments mainly to investigate important reaction mechanism, the reaction temperature, time and the addition amount of Zn in recycling of waste cemented carbide by the zinc bath process. As a result, it was required that the Zn bath reaction was heated more than at 800℃ to accelerate reaction of melted Zn and Co inside of wasted cemented carbide. Furthermore, thickness of the waste cemented carbide was reduced linearly according to increase of reaction time at 700℃ for 0.5~2h in the zinc bath reaction. Also the zinc bath reaction was examined that heating in lower than at 800℃ for 3h and then heated more than at 900℃ for 1h(above 3.0×10 torr-2 vaccum) was suitable to reduce vapour loss amount of Zn in the zinc bath process.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.9 no.1
• /
• pp.94-102
• /
• 2003

The purpose of this study was to identify the effects of foot-bath on fatigue of nursing students in clinical practice. method: The research design was a nonequivalent control group pretest-posttest design. The subjects were randomly assigned to one of four groups and data collection was conducted from June to August 2001. For the experimental group the foot-bath was performed once a day for 3 days. The instrument was subjective fatigue scale and 150mm graphic rating scale. For four groups pretest was done on first day and posttest was done on third day. The data was analyzed by the t-test and paired t-test. results: The subjective fatigue scale score was not significantly after the foot-bath in day duty but significantly lower after the foot-bath in evening duty. The graphic rating scale score was significantly lower after the foot-bath. The subjective fatigue scale score and graphic rating scale score on 1st, 3rd foot-bath day were significantly lower in experimental group. conclusion: On the basis of the above findings, this study suggests that foot-bath can be an effective fatigue relieving method.