• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.757-781
• /
• 2016

The results of diagnostics and analysis of an industrial hall located on the premises of a thermal power plant severely damaged by fire are presented in the paper. The comprehensive failure-related diagnostics, non-destructive and destructive tests of steel and concrete materials, geodetic surveying of selected structural members, numerical modelling, static analysis and reliability assessment were focused on two basic goals: The determination of the current technical condition of the load bearing structure and the assessment of its post fire resistance as well as assessing the degree of damage and subsequent design of reconstruction measures and arrangements which would enable the safe and reliable use of the building. The current mechanical properties of the steel material obtained from the tests and measured geometric characteristics of the structural members with imperfections were employed in finite element models to study the post-fire behaviour of the structure. In order to compare the behaviour of the numerically modelled steel roof truss, subjected to the effects of fire, with the real post-fire response of the damaged structure theoretically obtained resistance, critical temperature and the time at which the structure no longer meets the required reliability criteria under its given loading are compared with real values. A very good agreement between the simulated results and real characteristics of the structure after the fire was observed.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.175-181
• /
• 2012

This example was able to focus on the long usage of the pavement that it was merely through the oxidation of the asphalt pavement which it could contact with on the road in the industrial housing complex and correlation regulation of the asphalt subsidence with the load in basic Infra of the configuration. The problem in conjunction with the subsidence (transformation) was interpreted as a problem of the subsidence of each pavement layer to lead the subsidence of the road or the transformation to packaging side asphalt pavement, but the traffic number of times of the heavy vehicle highlights for main problems with the road where is concentrated. In the case of general asphalt paving, it thinks it exposes light, and to study a general phenomenon for the asphalt transformation and a cause for a pavement construction method and the property of material used for pavement and a complement method by the case study at this time of the compound with the heavy vehicle traffic that it can become clear that small success transformation occurs at a point in time when 1-2 years more pass, and a fatigue rift occurs by ultraviolet rays, the oxidation with the contact with the air afterwards, and described beginning to use by the above.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.16-28
• /
• 2008

Recent growth in LNG market has led dramatic increase in new buildings of LNG carriers and several large LNG carriers are now being constructed by shipbuilders in Korea. Large size LNG carriers has brought keen concerns on the issue regarding safety of cargo containment systems and sloshing impact load which is the critical source of loads on the membrane type containment systems. Up to the present, the best way to properly assess sloshing impact pressures on surrounding walls is a model testing for wide-ranged excitation conditions. These impact pressures obtained from model tests sometimes need to be interpreted to full-scale values and in the near future this necessity will be strengthened for more rigorous and direct safety assessment of LNG cargo containment system. In this paper, a basic experimental study is carried out with two different sized, 2D identically shaped model tanks excited in simple translational motions. Relationships between pressures of different sized model tanks are investigated Model tanks are filled with fresh water and equipped with same sized pressure sensors.

• 디지털융복합연구
• /
• 제14권6호
• /
• pp.431-438
• /
• 2016

본 연구는 만 21-24세의 체육학 전공 대학생을 대상으로 키네시오 테이핑과 아이싱 처치가 혈중젖산농도 및 심폐기능의 회복속도에 미치는 영향을 규명하여 운동을 보다 효과적으로 수행할 수 있도록 경기력을 제한하는 요인들을 극복하여, 운동수행능력을 향상 시킬 수 있는 기초자료로 제공하는데 그 목적이 있다. 젖산과 심박수의 회복 속도를 측정을 통하여 얻은 결론을 본 연구에서 키네시오 테이핑과 아이싱 처치가 최대부하 운동 후 직후 젖산의 회복속도와 운동 30분 후 심박수의 회복속도를 유의하게 증가시켰으나, 운동 직후 심박수, 운동 15분 후 젖산 및 심박수, 운동 30분 후 젖산에서 유의한 차이가 없었다. 키네시오 테이핑과 아이싱 처치는 혈액 공급에 변화를 주어 통증이 감소되고 근 피로도 감소에 긍정적인 효과로 사용되고 있지만 만족스런 효과를 나타내지 못하였다. 이후 연구에서는 보다 정확하고 기술적인 형태의 운동 프로그램을 적용하여 키네시오 테이핑과 아이싱 처치의 효과에 대해 지속적인 연구가 필요할 것이다.

• 청정기술
• /
• 제10권2호
• /
• pp.111-120
• /
• 2004

피혁 탈모 공정 폐수의 질소감소 및 황화물 감소, COD, BOD의 오염부하를 감소할수 있는 탈모공정 처리용 환경 친화적 피혁용 약품을 제조 하였다. 본 연구에서 개발한 Hair saving 공정처리제는 Urea, Mercaptan을 기본 물질로 하는 Liming agent와 Unhairing assist 제품을 제조하였다. Hair saving 공정에 처리한 결과 기존의 Hair burning 방법에 비해 회수된 모의 양이 약 2배 정도 증가하였다. 혁의 품질 및 생산성 평가의 지표인 수율을 좌우하는 Grain상태, 수축현상(Drawing)이 개선이 가능하였다. Wet Blue 및 완성원단에서의 인장, 인열 등의 물성과 Softness및 Touch 등의 가죽 본래의 천연감도 증대되는 효과가 있었다. 또한, 탈모공정후 배출 배수에서의 COD, T-N 농도가 약 50% 이상 감소 가능한 것을 확인 가능하였다.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.41-47
• /
• 2018

This paper analyzes the output characteristics of a self excited induction generator with isolated mode according to change of its speeds and loads for building a hybrid electric propulsion system in special purpose ships by using power take off. The induction generators are being considered as an alternative choice to the well-developed generators because of their lower unit cost, inherent ruggedness, operational and maintenance simplicity. However, the generator working by stand alone has a few problems that the reactive power is required to establish the air gap magnetic flux, and the induced voltage and magnetizing current fluctuate when the load is varied. In spite of its advantages, basic design data of the capacitor bank and behaviors of the output characteristics of the generator are not sufficient for the system. Based on the operating condition(speed range of main engine) of the target boat, a reduced experimental equipment system was constructed to analyze the output characteristics of the SEIG. And a suitable capacitor bank of a stand-alone generator and its output characteristics under various loads was investigated in detail through these experiments. According to the experimental result, it was confirmed that the capacitor bank should be $70{\mu}F{\sim}100{\mu}F$, and the proper SEIG induced voltage should be DC 80 V ~ 250 V in order to storage electrical energy into a battery.

• Journal of the Korean Wood Science and Technology
• /
• 제20권2호
• /
• pp.61-72
• /
• 1992

This study was carried out to investigate the fracture behavior and the fracture criterion of yellow lauan(Shorea spp.), when has used for furniture and wood structures, and to offer a reliability for wood structure and basic data for wood fracture criterion in experiments which are fracture tested under mode I, mode II and mixed mode loading condition. The results were summarized as follows; 1. Fractures in specimens which have inclined grain in yellow lauan procedeed from crack tip in the radial direction along the grain. 2. In yellow lauan, $K_{IC}RL$ was 42.1kg/$cm^{3/2}$ and $K_{IIC}RL$ was 15.8kg/$cm^{3/2}$. 3. The fracture criteria of lauan were; ($K_I/K_{IC}$)+($K_{II}/K_{IIC}$)=1 in RL system with inclined grain at $45^{\circ}$, ($K_I/K_{IC}$)+$(K_{II}/K_{IIC})^2$=1 with inclined grain at $15^{\circ}$ and $(K_I/K_{IC})^2$+$(K_{II}/K_{IIC})^2$=1 with inclined grain at $30^{\circ}$, $60^{\circ}$, $75^{\circ}$ and $90^{\circ}$, respectively. 4. The fracture criterion of wood could vary with the species, and the load applying condition. In order to measure the fracture criterion strictly, along with standardization of specimen geometry a large amount of experimental data is needed. 5. $K_{IC}$(critical stress intensity factor) can be predicted by grain angle. As the grain inclined angle increased, $K_{IC}$ and $K_{IIC}$ are increased.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.99-108
• /
• 2012

본 연구에서는 철근콘크리트 슬래브의 내부식성과 경량화를 도모하기 위하여 GFRP bar를 휨보강근으로 사용하는 경량골재콘크리트 슬래브를 고려하고 이 구조물에 대하여 기초적인 거동을 조사하였다. 경량콘크리트의 압축강도 및 인장강도 그리고 콘크리트 파괴에너지 측정, 일련의 슬래브 휨실험, 비선형유한요소해석을 통한 수치해석, 휨실험과 수치해석의 결과비교 등이 행하여졌다. 그 결과, GFRP bar를 휨보강근으로 사용한 경량콘크리트 슬래브는 기준시험체로 사용된 동일 규격의 철근콘크리트 슬래브에 비하여 무게를 28%정도 감소시킬 수 있었지만 파괴하중은 36%정도 감소되었다. 이는 GFRP bar의 낮은 축강성과 경량콘크리트의 낮은 부착강도 때문인 것으로 판단된다. 그리고 경량콘크리트의 부착력 감소 특성을 고려하기 위하여 GFRP bar와 콘크리트 경계면 사이에 계면요소를 사용한 수치해석 결과는 계면요소의 사용이 실험결과에 더 근접해갈 수 있는 방법임을 보여주었다.

• 접착 및 계면
• /
• 제5권2호
• /
• pp.22-36
• /
• 2004

Several in-situ testing methods of adhesively bonded joints under static short-time tensile loading are critically analyzed in terms of experimental procedure and data evaluation. Due to its rather homogeneous stress state across the glue line, the tensile-shear test with thick single-lap specimens, according to ISO 11003-2, has become the most important test process for the determination of realistic materials parameters. This basic method, which was improved in both, the experimental part by stepped adherends and easily attachable extensometers and the evaluation procedure by numeric substrate deformation correction and test simulation based on the finite element method (FEM), is therefore demonstrated by application to several kinds of adhesives and metallic adherends. Multi-axial load decreases the strength of a joint. This effect, which is illustrated by an experimental comparison, impedes the derivation of realistic mechanical characteristics from measured force-displacement curves. It is shown by numeric modeling that tensile-shear tests with thin plate substrates according to ISO 4587, which are widely used for quick industrial quality assurance, reveal an inhomogeneous stress state, especially because of relatively large adherend deformation. Complete experimental determination of the elastic properties of bonded joints requires independent measurement of at least two characteristics. As the thick-adherend tensile-shear test directly yields the shear modulus, the tensile butt-joint test according to ISO 6922 represents the most obvious complement of the test programme. Thus, validity of analytical correction formulae proposed in literature for the derivation of realistic materials characteristics is verified by numeric simulation. Moreover, the influence of the substrate deformation is examined and a FEM correction method introduced.

• 천문학논총
• /
• 제22권4호
• /
• pp.211-217
• /
• 2007

We have been making dual dome enclosures which are useful to track artificial space objects at SSNT (Space Science and Technology Lab.) Kyung Hee University. We verified the safety of the dome enclosures using basic design and structure analyses before manufacturing them, and then performed an optimization analysis for economic and safe systems. The dome enclosure has a fully-open type structure to smoothly operate a telescope made in the style of altazimuth mount with very fast tracking. It is also designed to be safe against extreme weather conditions. The general structure of the observatory system consists of the dual dome enclosures at the top of a container. For the structural analyses, we consider the following two methods: (1) gravitational sustain analysis - how the structure supporting the dome withstand the weight of the dome, and (2) wind load analysis that considers the effect of the wind velocity at the region where the observatory is located. The result of overall deformation is found to be less than 0.551mm and the result of equivalent stress is found to be 20.293Mpa, indicating that the dual dome system is reasonably designed. This means structurally to be safe.