• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.119-128
• /
• 2017

G-induced Loss of Consciousness(G-LOC) can be predicted by measuring Electromyogram(EMG) signals. Existing studies have mainly focused on specific body parts and lacked of consideration with quantitative EMG indices. The purpose of this study is to analyze the indices of EMG signals by human body parts for monitoring G-LOC condition. The data of seven EMG features such as Root Mean Square(RMS), Integrated Absolute Value(IAV), and Mean Absolute Value(MAV) for reflecting muscle contraction and Slope Sign Changes(SSC), Waveform Length (WL), Zero Crossing(ZC), and Median Frequency(MF) for representing muscle contraction and fatigue was retrieved from high G-training on a human centrifuge simulator. A total of 19 trainees out of 47 trainees of the Korean Air Force fell into G-LOC condition during the training in attaching EMG sensor to three body parts(neck, abdomen, calf). IAV, MAV, WL, and ZC under condition after G-LOC were decreased by 17 %, 17 %, 18 %, and 4 % comparing to those under condition before G-LOC respectively. Also, RMS, IAV, MAV, and WL in neck part under condition after G-LOC were higher than those under condition before G-LOC; while, those in abdomen and calf part lower. This study suggest that measurement of IAV and WL by attaching EMG sensor to calf part may be optimal for predicting G-LOC.

• Bulletin of the Korean Chemical Society
• /
• 제27권8호
• /
• pp.1145-1148
• /
• 2006

Excitability is one of the basic and fundamental mechanisms utilized for signal transmission in living organisms. With reference to the condition by Marek and the condition by Schneider, we found a condition in which excitability with similar shapes can appear by chemical and electric perturbation. Our condition is constructed with 3 chemical channels and 1 electric channel, and can be used as a condition for a chemical spiking neuron and as a unit of a chemical spiking neural network.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.106-112
• /
• 1994

We have developed a large area ion shower doping system with an RF plasma ion source. The ion current density (i.e., doping concentration) increases with RF power and acceleration voltage. Using this technique, we investigated the optimum condition for ion doping of phosphorus in a-Si:H and poly-Si films. The optimum acceleration voltage and doping time are 6KV and 90sec, respectively, in a-Si:H films. Under this condition the electrical conductivity of ion-doped a-Si:H film is obtained ~10$^{-3}$/cm at room temperature. The sheet resistance decreases witnh acceleration voltage in ion-doped poly-Si, and a heavily-doped layer with a sheet resistance of 920$\Omega$/ㅁ is obtained by using ion doping and subsequent activation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.269-271
• /
• 2005

Using optimized sputtering condition of a-Si and $SiO_2$ thin film, we can obtained the large grained poly-Si film on PES substrate. The gate dielectric grown by plasma enhanced atomic layer deposition, laser activation and organic interlayer dielectric material make TFTs on PES possible with mobility of $11cm^2/Vs$ (nMOS) and $7cm_2/Vs$ (pMOS).

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.265-266
• /
• 2006

The chemical conversion coating formed on magnesium alloy investigated for low cost and harmless in environment by using the colloidal silica as the main component. The film formed in 298 K is thick, the film, which was thought combination of Si-O, was formed. The film formed in 313 K is thinner than that in 298 K. The quantity of film formed at high temperature such as 333 K and 353 K is smaller than dissolved quantity. At the anodic polarization experiment, corrosion resistance in sealing by hot water after chemical conversion treatment in basic solution condition get worse than that in comparison with basic solution condition. In salt spray test, the ratio of black rust on specimen that did not conducted chemical conversion treatment was five times or more compared with those of chemical conversion treated specimen. The film thickness of chemical conversion coating produced by alkali treatment process is thinner than in comparison with that of specimen produced in basic chemical conversion treatment solution condition. It is thought, however, that it showed good corrosion resistance during salt spray test because the area of microcracks is small.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권2호
• /
• pp.14-17
• /
• 2016

Annealing as-grown electron-doped cuprates under a low oxygen-partial-pressure condition is a necessary step to achieve superconductivity. It has been recently found that the so-called protect annealing results in much better superconducting properties in terms of the superconducting transition temperature and volume fraction. In this article, we report on angle-resolved photoemission spectroscopy studies of a protect-annealed electron-doped cuprate $Pr_{0.9}La_{1.0}Ce_{0.1}CuO_4$ on annealing condition dependent superconducting and pseudo-gap properties. Remarkably, we found that the one showing a better superconducting property possesses almost no pseudo-gap while others have strong pseudo-gap feature due to an anti-ferromagnetic order.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.534-541
• /
• 2004

To boost the Korean peninsula as a logistical hub of North-East Asia in 21st century is an important part of Korean development strategies. This research has been conducted on the premise that the connection and operation of the Korean Peninsula break-railway and Euro-Asian railway network will be a great drive for Korean economy and railway technology development. For the preparation to do a further research on this subject, this paper introduces the general condition and related basic material for the railway network operation through the countries along the corridor. It also provides the basic data of railway and actual operation condition in the involved Euro- Asian areas, such as Russia, China, Mongolia, Kazakh-stan, etc.

• 한국주조공학회지
• /
• 제41권4호
• /
• pp.342-348
• /
• 2021

거의 모든 철계 주조공장은 생압고철 (press scrap)을 주 장입재로 사용한다. 본 연구에서는 생압고철의 형상, 크기를 최적화하여 용해에너지를 절감하고자 하였다. 주조공장 두 곳의 3t/h 중주파 유도용해로를 활용하여 실험하였다. 개선 조건의 경우, 초기 장입 시에는 맞춤형 생압고철을 사용하였고, 추가 장입 시에는 소형 생압고철을 사용하였다. 개선 조건의 에너지 절감 효과를 높이기 위해, 회수철 표면의 청정화 공정을 강화하여 실시하였다. 개선 조건에 의한 용해에너지 원단위 (melting energy basic unit) 절감률은 두 주조공장에서 각각 23.3, 23.9%였고, 거의 유사하였다. 원단위 수준이 다른 두 곳의 주조공장 모두에서 개선 조건은 매우 효과적이었다. 개선 조건의 에너지 절감 원리 및 경제적 효과를 기술하였다.

• Journal of applied mathematics & informatics
• /
• 제27권1_2호
• /
• pp.365-374
• /
• 2009

Under certain conditions, we use augmented Lagrangians to transform a class of generalized semi-infinite min-max problems into common semi-infinite min-max problems, with the same set of local and global solutions. We give two conditions for the transformation. One is a necessary and sufficient condition, the other is a sufficient condition which can be verified easily in practice. From the transformation, we obtain a new first-order optimality condition for this class of generalized semi-infinite min-max problems.

• Journal of applied mathematics & informatics
• /
• 제26권5_6호
• /
• pp.983-989
• /
• 2008

The purpose of this paper is to continue the investigation of monoids over which various properties of acts happen to coincide. Special concern is to characterize monoids by regular right acts. In particular there are given some characterizations of monoids over which all right acts that satisfy condition (E)(or condition (P)) are regular.