• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5A
• /
• pp.323-332
• /
• 2003

We have proposed and implemented a novel cost-effective optical subcarrier mutiplexing transceiver for base station without light sources in which optical signal can be transmitted bidirectionally over a single optical fiber. Modulated optical signal is retransmitted from the base station to the central office using a ring-type base station which consists of a circulator and an Mach-Zehnder modulator, where the optical source is supplied from the central office. In order to investigate the feasibility of the proposed base station without light sources, we have measured adjacent channel power ratio and carrier to noise ratio by transmitting the IS-95 CDMA signal and 14 tones carrier signal bidirectionally through the system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4A
• /
• pp.341-349
• /
• 2010

In this paper, we studied on the optimization of the output power of Mobile WiMAX (IEEE 802.16) base station considering the technical condition of base station and wireless channel condition. The optimum power of base station can be estimated based on the link budget calculation of downlink and uplink in the Mobile WiMAX communication system. We investigated the optimum output power of base station in the case of 2Tx-2Rx base station with $2{\times}2$ MIMO(multiple input multiple output) technology, 2Tx-4Rx base station with improved receiver sensitivity, and 4Tx-4Rx base station with beamforming technology.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.661-663
• /
• 2021

Network performance is degraded when the UE is disconnected because the outage occurs at the base station in a mobile communication system. Therefore it is important to detect and recover the outage. In this paper, detecting the outage base station by using the KPI and the network scanning in the neighbor base station, and increasing the transmit power and changing the frequency band to recovery the outage scheme is proposed. The proposed scheme uses not only the KPI of the base station but also the network scanning of the neighbor base stations to detect the outage base station, so that it is possible to detect the outage base station more accurately. In addition, when the outage occurred, the neighbor base station changes the transmit power and frequency band to recover the outage with less signal interference.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.3
• /
• pp.207-214
• /
• 2021

A new positioning technique for positioning of LTE base stations is proposed. The positioning information of the base station is absolutely necessary for model-based wireless positioning, and is required in some of the various merhodologies for estimating signals in an uncorrected area when construnting a database for fingerprinting-based positioning. Using the acquired location-based Reference Signal Received Power (RSRP) information to estimate the location of the base station, it is impossible with the existing trilateration methods. Therefore, in this paper, a method using reference particles is proposed. Particles are randomly generated in the application area, and signal propagation modeling is performed assuming that a base station is located in each particle. Based on this, the errors of measurements are calculated. The particle group with the minimum measurement errors is selected, the position of the base station is estimated through weighted summation, and the signal propagation model of the corresponding base station is built at the same time. The performance of the proposed technology is verified using data acquired in Seocho-dong, Seoul.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.3
• /
• pp.118-127
• /
• 2010

Inter-vehicle communication is one of the most important parts in Intelligent Vehicle System. Through this communication, drivers can recognize what is happening out of their sights, such as the freezing condition of the street, traffic accidents, and so on. Each car in IVS gives various services to the drivers after analyzing those received information from cars or a base station. If the message is, however, exchanged from car to car directly, the computation cost which is needed for all the car to authenticate the transmitted message between nearby cars is tremendously high. Therefore, one can naturally think that the message communication between cars is performed with the help of the base station to reduce the computation cost. In this case where the base station collects all the information transmitted from cars and broadcasts them nearby, there should be an efficient way both for the base station to authenticate the car message within its communication range and for the car to authenticate the information received from the base station. In this paper, we present a two-way authentication protocol using a hash chain to efficiently exchange GPS information between a car and a base station. This information can be used to provide a driver with the navigation which displays all the moving cars around him in real time. When a car goes into an area of a base station, the car authenticates itself to the base station using its private key of PKI, sends a commitment of a hash chain, then starts to send a message with the hash value for authentication. The message includes GPS information, driver's status and so on. The base station also authenticates itself to the nearby cars using its private key, transmits the commitment of the hash chain, and sends all the messages gathered from cars with authentication information.

• Journal of Information Technology Services
• /
• v.7 no.2
• /
• pp.181-195
• /
• 2008

The rapid growth of mobile communication technology has provided the expansion of mobile internet services, particularly mobile realtime transaction takes much weight among mobile fields. There is an increasing demand for various mobile applications to process transactions in a mobile computing fields. Thus, During transmission in wireless networks a base station failure inevitably causes data loss of the base station buffer. It is required to compensate the loss for communication. The existing methods for a base station failure are not adequate because they all suffer from too much overhead and resolve only the link failure. In this paper, we study an efficient recovry systems for a mobile DBMS. We propose SLL (Segment Log List) that enables the mobile host to compensate data loss efficiently in the case of base station failure. In SLL, a base station deliveries an output information of data cells to a mobile host. when a base station fails, the mobile host can retransmit just next data cells. We also prove the efficiency of new method.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.4
• /
• pp.87-92
• /
• 2018

One of the problems with the base station equipment is that there is a large difference between the replacement time of the hardware equipment such as the base station equipment and the radio access equipment, and the evolution period of the communication standard. Therefore, the base station communication platform must be flexible enough to handle the evolving communication standards after purchase. Recent research on reconfigurable communications platforms has focused on the efficient architecture of the communications platform to meet these requirements through software downloads while still using existing hardware. This paper presents a prototype of a base station communications platform based on the ETSI standard reconfigurable architecture. The communication platform presented in this paper is implemented as an ETSI standard reconfigurable architecture using a general-purpose DSP (Digital Signal Processor). In the implemented prototype, we verify the real-time feasibility of communication protocol updates through software reconfiguration.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.118-125
• /
• 2011

In this paper, a WCDMA experimental base station is constructed for power management of mobile communication base station and effective isotropic radiated power is determined by using received power of pilot channel measured on the line-of sight. The measurement system was constructed by a experimental base station and a measurement receiver and the common pilot channel (CPICH) power of the base station was measured. Effective isotropic radiated power (EIRP) of the base station obtained by the measurement value considering correction factor for the errors represented the difference of 0.5 dB compared to the established EIRP of the base station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1348-1358
• /
• 2000

The paper contributes to a traffic analysis for the CDMA cellular base station with repeater which are operated in a cell site. Usually the repeaters' traffic of the CDMA cellular system hardly could be separated from that of the base station because the links of the repeaters are divided from RF circuits of the base station. The paper introduces a traffic measuring method that separates the traffic of repeaters from that of the base station using time delay device. To get general results we use a single BTS(Base station Transceiver Subsystem) with three repeater as well as a single BTS with a single repeater. Then we proved that the traffic of the repeaters could separate from that of the base station clearly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.624-634
• /
• 2008

The mobile station which is about to do handover in IEEE 802.16e networks scans its neighboring base station channels to decide its next target base station. However, due to the lack of location information of its subscribers, the serving base station cannot provide any reliable candidate channel which is actually attachable by the scanning mobile stations, which makes the mobile station suffer from the long scanning time. Sometimes, long scanning time may cause the degradation of quality of service due to repeatable scan-duration or failure to start the handover procedure in time. To overcome these problems, in this paper, we propose a new protocol so called fast group scanning scheme, in which multiple mobile stations form a group to scan their neighboring base station channels simultaneously. Main contribution of this proposal is to find and decide a reliable target base station within a short scanning time. The fast group scanning scheme can be deployed to the cell network of the serving base station with a dynamic neighboring base station list management.