• Membrane Journal
• /
• v.25 no.2
• /
• pp.85-98
• /
• 2015

A global trend of replacing metal or glass containers with polymer-based packaging materials has been prevalent in the food packaging industry due to their ease in processibility, excellent transparency, and good cost efficiency. Barrier polymers tend to show low permeabilities for atmospheric gases such as oxygen, carbon dioxide, and water vapor, which allow them to be utilized in the food and beverage packaging industry. With the current global trend, expansion of polymeric packaging materials to new markets such as oxygen sensitive juices, flavored water, and energy drinks requires improved $CO_2$ and $O_2$ barrier properties. The improvement of the existing polymer-based barrier platform will enable a rapid market impact. In this paper, the current barrier technologies such as (1) antiplasticization-induced barrier materials, (2) synergistic effect of antiplasticization and crystallization, (3) new barrier polymers, (4) nanocomposite materials, and (5) polymer blending are introduced with their characterization techniques for the development of advanced packaging materials.

• Macromolecular Research
• /
• v.12 no.1
• /
• pp.26-31
• /
• 2004

Using gravimetry, we have studied the diffusion of water into sulfonated polystyrene ionomers. Diffusion coefficients were calculated from Fick's equation. The water sorption was found to be dependent on the ion content (3.6-11 mol％) and the nature of the cation (H, Na, Li, or Zn). The sorption kinetics indicates a slight deviation from Fickian behavior. We used the analytical solution of Fick's equation to evaluate the concentration profiles, which are in good agreement with the experimental results.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.52-55
• /
• 2003

Poly (ethylene 2, 6-naphthalate) (PEN) has been used for a high performance engineering plastics such as fiber, film, and packaging, because of excellent physical properties and outstanding gas barrier characteristics [1-2]. However, the application of PEN is limited because PEN exhibits a relatively high melt viscosity. Recently, many researches for organic/inorganic composites by applying nano-particles to the polymer matrix have been carried out [3], and the nano-particles exhibited greatly improved mechanical and rheological properties [4]. (omitted)

• Design & Manufacturing
• /
• v.2 no.6
• /
• pp.28-32
• /
• 2008

Polymer solar cells are a type of organic solar cell (also called plastic solar cell), or organic photovoltaic cell that produce electricity from sunlight using polymers. It is a relatively novel technology, they are being researched by universities, national laboratories and several companies around the world. In this paper, stamping mold of barrier ribs for polymer solar cells was manufactured by lithography and electroforming which can control the height of pattern and 80nl of barrier ribs was manufactured by using hot embossing.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.22-28
• /
• 2011

Various materials are used as electrical barrier materials, such as glass, insulating oil, gas, paper and polymer. These materials shut off electricity from conductor as a barrier and separate as well as support conductor from outside environment while using electrical equipment. Polymers are generally used for cable insulation material. Recently environmental regulation are reinforced and eco-friendly materials are in trend.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.371-378
• /
• 2021

The formation of hydrophilic surface based on polymers has received great attention due to the anti-adhesion of bacteria on solid substrates. Anti-adhesion coatings are aimed at suppressing the initial step of biofilm formation via non-cytotoxic mechanisms, and surfaces applied hydrophilic or ionic polymers showed the anti-adhesion effect for bioentities, such as proteins and bacteria. This is attributed to the formation of surface barrier from hydration layers, repulsions and osmotic stresses from polymer brushes, and electrostatic interactions between ionic polymers and cell surfaces. The antifouling polymer coating is usually fabricated by the grafting method through the bonding with functional groups on surfaces and the deposition method utilizing biomimetic anchors. This mini-review is a summary of representative antifouling polymers, coating strategies, and antibacterial efficacy. Furthermore, we will discuss consideration on the large area surface coating for application to public facilities and industry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.263-266
• /
• 1999

Electrolunlinescent devices based on conjugated polymer emitting materials have been much attracted possible applications for multicolor flat panel display, since the conjugated polymers have a small band gap emitting obtained at a low driving voltage. In this paper, we fabricated the single layer EL device using poly(3-hexylthiophene) as emitting material Electroluminescence(EL) and I-V-L characteristics of indium-tin-oxide[ITO]P3HT/AI device with a various thickness were investigated. It was demonstrate that the I-V characteristics depend, not the voltage but the electric- field strength, The current is dependent on the electric filed and not on the applied voltage, indicating that the carriers are injected by a tunneling process. In the device, the barrier to hole injection is only 0.5eV and the barrier to electron injection is 1.5eV.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.321-324
• /
• 2002

Recently, organic-inorganic nanocomposites have attracted great interest from researchers since they frequently exhibit unexpected hybrid properties synergistically derived from two components[1]. The addition of highly dispersed inorganic nano-sized fillers permits improvement of certain properties of polymers as compared with conventional particulate composites; increase of modulus and strength, improved barrier properties, increase in solvent and heat resistance, and good optical properties[2]. (omitted)

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.41-46
• /
• 2003

Plasma processes developed in our laboratory, of interest for biomaterials, barrier coatings for food packaging and corrosion protection, are briefly reviewed in this contribution. Particular attention is devoted to diagnostics aimed to rationalize plasma-surface interactions and to identify parameters and correlations to be utilized for process control.

• Macromolecular Research
• /
• v.12 no.2
• /
• pp.156-171
• /
• 2004

We describe the precision synthesis schemes of siloxane-containing polymers, i.e., the control of their molecular weight, stereoregularity, and higher-order structures. First, we found a new catalytic dehydrocoupling reaction of water with bis(dimethylsilyl)benzene to give poly(phenylene-disiloxane). Together with this reaction, we applied hetero-condensations to the synthesis of thermally stable poly(arylene-siloxane)s. The dehydrocoupling reaction was applied to the synthesis of syndiotactic poly(methylphenylsiloxane) and poly(silsesquioxane)s, which we also prepared by hydrolysis and deaminative condensation reactions. We discuss the tendency for loop formation to occur in the synthesis of poly(silsesquioxane) by hydrolysis, and provide comments on the design of functionality of the polymers produced. By taking advantage of the low energy barrier to rotation in the silicon-oxygen bond, we designed selective oxygen-permeable membrane materials and liquid crystalline materials. The low surface free energy of siloxane-containing systems allows surface modification of a blend film and the design of holographic grating materials.