• Korean Journal of Food Science and Technology
• /
• v.9 no.1
• /
• pp.81-83
• /
• 1977

A study was conducted on the preparation of Ramyon using composite flours of raked barley (20 or 30%)-wheat(80 or 70%) in commercial plant scale and on the quality evaluation of Ramyon made from those flours. The naked barley(20%)-wheat(80%) flour gave acceptable Ramyon-making characteristics during the continuous Ramyon manufacturing process. The composite flours had a higher water absorption rate in kneading process and oil absorption value of the Ramyon product than those of wheat flour alone. Even though the Ramyon of composite flours showed a little inferior value compared with wheat flour alone in the cooking and texture characteristics, sensory panel scores of Ramyon indicated that the naked barley (20%)-wheat(80%) flour was acceptable in Ramyon.

• Korean Journal of Food Science and Technology
• /
• v.12 no.1
• /
• pp.59-65
• /
• 1980

Three winter wheats and 3 triticales grown in Korea were compared for nutritional quality and food-making performance. The flour yield of triticale was 54 % below that of wheat, while triticale was higher in protein than wheat. The amino acid composition of triticale flours was similar to that of wheat flours. The essensial amino acid compositions were slightly higher in triticale flours. Noodles of acceptable quality were produced from triticale flours. The bread produced from triticale flours was somewhat inferior to that from soft wheat flours. The triticale flours produced bread of slightly lower quality than the soft wheat flours. The specific loaf volume were lower, the grain more rough, the texture slightly harsher and the crumb color slightly darker.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.1
• /
• pp.66-72
• /
• 2014

Quality characteristics of yogurt with added colored barely flour was investigated during fermentation by lactic acid bacteria. Chemical properties such as moisture, crude protein, starch, ash and ${\beta}$-glucan contents was measured. pH, acidity, brix, Hunter color value and growth of lactic acid bacteria in yogurt was investigated during fermentation by L. acidophilus, L. bulgaricus, and S. thermophilus mixed culture. Crude protein contents of Daeanchal and Boseokchal was 16.16 and 12.17%, respectively. Starch contents of daeanchal were shown lower score. The pH of yogurt by addition of barley flour (Daeanchal) addition 0 and 20% were 6.66 and 6.40, respectively. The pH of yogurt supplemented with barley flour tended to be lower than before control which was not added barely flours and oligosaccharide in yogurt. Titratable acidity of yogurt added barley flour was higher compared with that of control. Brix of yogurt was decreased during fermentation by lactic acid bacteria. Lightness of yogurt added barley flour (Daeanchal) addition 0 and 20% were 83.25 and 69.83, respectively. The original microbial population of the yogurt during 0, 5, 8, and 15 hr fermentation were 7.48, 7.79, 8.15, and 8.71 Log CFU/g, respectively. Moreover, the addition of colored barley flour was to promote the proliferation of lactic acid bacteria in yogurt. In our research, addition of colored barley flours added into the yogurt may also have contributed to growth of lactic acid bacteria.

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.6-15
• /
• 1973

In an attempt to develop composite flours based on raw materials available in Korea, six domestic resources were investigated with respect to their physical and chemical properties, nutritive value and economy. The results are summarized as follows: 1) Flours from naked barley, sweet potato, potato, corn, defatted rice bran and defatted soybean were compared in respect of their proximate composition, thiamine content and protein score. 2) In color comparison, naked barley and defatted soy flours were comparable to wheat flour whereas corn and sweet potato flours were a little inferior. In raising power, naked barley and defatted soy flours were similar to wheat flour and others were inferior. 3) In maximum viscosity of flours by amylograph, naked barley, corn and potato flours were higher than wheat flour and others were lower. In viscosity in cooling, corn flour was similar to wheat flour and naked barley and potato flours were lower. Addition of $10{\sim}20%$ defatted soy flour into other flours generally caused the lowering of viscosity. Addition of emulsifiers such as glyceryl monostearate, calcium stearyl lactylate, Methocel and Emulthin into the flours manifested different effects on the amylogram. 4) In nutritional test by rat, diets consisting of naked barley, sweet potato, potato or corn flours, each containing defatted soy flour (at 10% level with exception of 20% for sweet potato flour) and naked barley flour fortified with lysine were similar to wheat flour in digestibility, but were superior in NPU and biological value. 5) In price estimation, sweet potato and corn flours were competitive with wheat flour, but naked barley flour was a little expensive. On the other hand, barley and sweet potato are promising in terms of domestic production.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.180-183
• /
• 2008

Digestion properties of 3 types of cereals, white rice, brown rice, and barley, were measured after cooking or grinding. Regardless of the processing methods, white rice showed the highest rate and the greatest extent of digestion, whereas barley showed the lowest values. During the early digestion period, cooked white rice kernels had a larger k (kinetic constant) value than uncooked white rice flour, indicating that cooking induced faster digestion than grinding. In the case of brown rice and barley, the cell wall in cooked kernels remained intact and resulted in a lower k values than those of uncooked flour. However, after 3 hr of digestion, the total digestion extent was greater for the cooked brown rice and barley than that for uncooked flours. The high content of slowly digestible starch (SDS) in cooked brown rice and barley might be due to the starch fraction which was protected by the cell wall. The resistant starch (RS) content, however, was greater for the uncooked flours than that for cooked kernels. The cooked kernels of 3 cereal samples tested showed higher glycemic index (GI) values than the uncooked flours.

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.28-32
• /
• 1976

This study was carried out to know the adaptability of barley flour, potato flour and white ash as extender and filler of urea-formaldehyde resin for plywood as a substitute material of wheat flour. The extenders and filler used at this study were extended by several groups of percentages. Shear strength, moisture contents, and specific gravities were compared among tested groups. The results obtained are summarized as follows. 1) Wet and dry shear strength of plywoods extended by 10% barley flour, 30% potato flour, and wheat flours were shown better results than non extended plywoods. 2) There was no significant difference between plywoods extended until 50% barley flours and non extended plywoods. 3) Shear strength of plywoods extended by 50% potato and 100% barley flours were shown worse result than non extended. 4) Dry and wet shear strength of plywoods extended by white ash were shown worst result. 5) The plywoods extended by potato flours were shown not only better shear strength, but also considered more profitable cost for extending.

• Korean Journal of Food Science and Technology
• /
• v.7 no.2
• /
• pp.85-90
• /
• 1975

Milling yields from naked barley varieties were found to be approximately 10% greater with a constant milling rate than yields from covered barley varieties. Also, the ash content of flour from naked barley varieties is less than from covered barley. Amylograms from barley flours showed higher viscosity for the naked varieties than for covered varieties. Farinograms of doughs prepared from 10:90 and 30:70 barley: wheat flour mixtures indicated general deterioration of bread baking qualities with increasing additions of barley flour. A comparison of bread baking qualities between naked and covered barley flours showed greater stability, greater elasticity, and less weakening with naked barley flour than with covered barley flour.

• Plant Resources
• /
• v.4 no.3
• /
• pp.140-146
• /
• 2001

This study was conducted to investigate the $\beta$-glucan contents and their characteristics of winter cereals according to particle sizes and milling recoveries. Sieved fractions differed in their average contents of $\beta$-glucans, and the coarse fraction had higher contents of $\beta$-glucan than finely milled fractions. In all winter cereals, the $\beta$-glucan contents of raw flours were higher than those of their brans, and the highest $\beta$-glucan contents of every cereals were observed at 100 mesh > or 100-140 mesh fractions except the Chalssalbori fractions which showed the higest $\beta$-glucan contents (12.9%) at 140-200 mesh fraction. As compared with the $\beta$-glucan content of Chalbori among the various milling recoveries, the $\beta$-glucan was distributed more evenly throughout the endosperm but $\beta$-glucan content in bran of Chalbori was only 1.5%. However, $\beta$-glucan content of Chalssalbori (hull-less waxy barley) was the highest in the subaleurone region (8.2%) and declined slightly toward inner layers of grain. This results suggest that $\beta$-glucan distribution between high (Chalbori) and low $\beta$-glucan barley (Chalssalbori) may explain the difference in milling performance of barley. On the other hand, $\beta$-glucan contents of two rye varieties (Chilbohomil, Chunchoohomil) were lower than those of two waxy barley varieties, and the higest $\beta$-glucan contents were observed at the 60% milling recoveries. In all winter cereals, the L-values (lightness) of raw flours were higher than those of brans. And the L-values of barley varieties were higher than those of oat and rye varieties. As the particle sizes and milling recovery ratios were decreased, the L-value were increased. The a-values (redness) in brans of every winter cereals were higher than those of every particle size flours and every milling ratio fractions, and this tendency was observed in the b-values (yellowness) of every particle size of cereal flours. The L and b-value of barley, the b-value of oat, and L, a, b-value of rye have the significant relationship with the $\beta$-glucan contents, respectively. This results represent the fact that $\beta$-glucans affected the color of the flours and pounded grains of winter cereals.

• Applied Biological Chemistry
• /
• v.44 no.1
• /
• pp.30-34
• /
• 2001

Physicochemical properties of milled rice, brown rice, pearled barley, wheat, sorghum, foxtail millet, soybean, and adzuki bean were evaluated for the production of extrusion formed multi-grain. Grain flours showed large differences in chemical composition including starch, protein, fat, ash, and total dietary fiber contents. Grain flours were brighter in the following order of milled rice>pearled barley>soybean>brown rice>wheat>sorghum>adzuki bean>foxtail millet, and most of the grain flours showed red-yellowish color. Mean particle sizes of grain flours were different among various grains, and whole grain flours tended to have coarser particle size than milled grain flours. The amounts of damaged starch in cereal flours were varied from 5.4 to 10.9%, and limited amount of damaged starch was present in legume flours. Water absorption index of grain flours was, in decreasing order, adzuki>bean>milled rice>brown rice>sorghum>wheat>foxtail millet>pearled barley>soybean. Water solubility index was higher in legume flours containing high protein content.

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.25-32
• /
• 1973

Noodles and cookies were made from composite flours based on domestic resources and their quality was assessed to obtain the following results. 1) Various flours containing $10{\sim}20%$ defatted soy flour did not form belt in noodle-making process, but the use of 1.5% GMS + 2% Methocel as binder was very effective in noodle-belt formation and cooking quality. 2) Out of four raw flours, naked barley flour was most suitable for noodle-making. Addition of wheat flour at 25% or 50% level into the four composite flours greatly improved the quality of noodles and particularly that based on naked barley was similar to wheat flour in color and gave rather palatable taste. 3) Though cookie could be made from any composite flours without using GMS or CSL, naked barley flour was the best in sensory evaluation of the product. 4) Addition of wheat flour at 25% or 50% level into above composite flours gave cookies comparable to standard wheat product except the case of composite flour based on defatted rice bran.