• Title/Summary/Keyword: bare

Search Result 1,495, Processing Time 0.029 seconds

Early Stage Performance of Constructed Wetland System for Nonpoint Source Pollution Control (비점원오염 제어를 위한 인공습지의 초기단계 연구)

  • Kim, Hyung-Chul;Ham, Jong-Hwa;Han, Jung-Yoon;Yoon, Chun-Gyeong
    • Korean Journal of Ecology and Environment
    • /
    • v.39 no.4 s.118
    • /
    • pp.481-488
    • /
    • 2006
  • The field scale experiment was performed to examine the performance of the constructed wetland for nonpoint source (NPS) pollution loading reduction. Four sets (0.88 ha each) of wetland and pond system were used. After three growing seasons of the wetland construction, plant coverage increased to about 90% even without plantation from bare soil surfaces at the initial stage. During the start up period of constructed wetlands, lower water levels should be maintained to avoid flooding newly plants, if wetland plants are to start from germinating seeds. The average removal rate of $BOD_5$, TSS, T-N and T-P during the first two years was 5.6%, 46.6%, 45.7%, and 54.8%, respectively. The $BOD_5$ removal rate was low and it might be attributed to the low influent concentration. The early stage of wetland performance demonstrated the effectiveness of water quality improvement and was satisfactory for treating polluted stream waters. From the first-order analysis, T-P was virtually not temperature dependent, and $BOD_5$ and TSS were more temperature dependent than T-N. A pond-wetland system was more effective than a wetland-pond or a wetland alone system in water quality improvement, particularly to reduce T-P. Overall, the wetland system was found to be an adequate alternative for treating a polluted stream water with stable removal efficiency and recommended as a NPS control measures.

Relationships Between Edge Formation of Burned Forests and Landscape Characteristics with Consideration on Spatial Autocorrelation (공간 자기상관성을 고려한 산불피해지 경계 형성과 경관특성변수들과의 관계)

  • Lee, Sang-Woo;Won, Myoung-Soo;Lee, Hyun-Joo
    • Journal of Korean Society of Forest Science
    • /
    • v.102 no.1
    • /
    • pp.113-121
    • /
    • 2013
  • It has been known that edges of forest fire areas play significant roles in post-fire change of forest ecosystem and recovery process. The purpose of this study was to analyze the relationships between edge formation of burned forests and landscape characteristics with consideration on spatial autocorrelation. Samcheok fire site burned in 2000 was selected as the study area. Seven hundred fifty three of 500 $m^2$ grid cells were generated for measuring landscape characteristics. This study used the topographic variables including slop, elevation, topographic wetness index, solar radiation index and proportions of fuel and land use types. In delineating landscape characteristics correlation analysis with modified t-test were performed for exploring the relationships between edge formation and landscape characteristics. The results indicated that edge formation of burned forests was positively correlated with most variables including TWI, SRI, water, paddy, developed, farm, grass, bare soil, and negatively related with elevation, slope and all fuel types. Especially TWI (r=0.437) showed a strong positive correlation with edge formation. According to the results, edge of burned forests were likely formed when proportions of heterogeneous land use types were high with mild slope and low elevation.

Mark Chagall's Paintings Transferred into Contemporary Korean Poems: Youngtae Kim's Anthology, Winter in the Village of Jews, Chunsoo Kim's "Snow Falling on the Village of Chagall," and Sunghun Lee's Anthology, Poetic Anthology of Chagall (한국 현대시에 수용된 마르크 샤갈 그림 - 김영태 시집 "유태인 사는 마을의 겨울" 김춘수 시 "샤갈의 마을에 내리는 눈" 이승훈 시집 "시집 샤갈$\lcorner$에 수용된 샤갈의 그림세계)

  • 윤호병
    • Lingua Humanitatis
    • /
    • v.1 no.1
    • /
    • pp.141-157
    • /
    • 2001
  • In his discussion of some desirable tuning points in comparative literary studies, Henry H. H. Remark has emphasized the importance of literary approach to other forms of art. Understanding the significance of such a method of comparative literature, the present study focusses on three contemporary Korean poets who have transferred Mark Chagall′s paintings into their poetry: Youngtae Kim, Chunsoo Kim, and Sunghun Lee. They are usually evaluated as surrealist/modernist in our literary circles. In transforming Chagall′s paintings into his poems, Youngtae Kim has incorporated a variety of surrealist mosaic techniques such as montage and collage. The resultant peculiarity of his poetry makes it hard to lay bare the correspondence or similarities between his poetic world and the world of Chagall′s artistry. It is nonetheless possible to see how Kim, as a poet and painter, had interpreted Chagall′s world with a bird′s-eye view of it. Chunsoo Kim′s "Snow Falling on the Village of Chagall" relates specially to one of Chagall′s paintings, "I and My Village." The present study has taken notice of this correlation in sorting out some basic elements of poetic transfiguration. One of the techniques employed in the poem under discussion is that of juxtaposing the Russian village of Chagall and the Korean village the poet visualizes, with the effect of putting two national traditions in contrast. A reading of the poem reveals that it is not so much the result of a detailed analysis of the painting as a revival of its lingering impression as a whole. In Sunghun Lee′s poetry, surrealist techniques are again a hallmark. But his method of transferring the images of the paintings into his poems falls somewhere between those of Youngtae Kim′s and Chunsoo Kim′s: it is akin to the ′bird′s-eye method′ of the former and shares the impressionistic touch with the latter, but at the same time Lee is analytical by disposition and opts for concrete descriptions. ′Love,′ ′farm,′ and ′time′ are the keywords that are brought under discussion in the present study. There is a growing demand in the current international comparative literary studies for broadening the area of comparative literature. This study hopes to be a small contribution to endorsing the importance of comparative approach to fine arts.

  • PDF

Marriage in Korea I. Evidence of Changing Attitudes and Practice

  • Kim, Mo-Im;Harper, Paul A.;Rider, Rowland V.;Yang, Jae-Mo
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.2 no.2
    • /
    • pp.13-26
    • /
    • 1975
  • Seven aspects of attitude toward marriage in Korea are examined to better understand present and future marriage patterns. Also, various facets of current marriage practice are compared with attitudes. The study comprises three groups of roughly 600 women each, selected by random sampling from a rural, an urban, and a semi-urban area. A carefully designed and pretested questionnaire was checked for reliability by a reinterview in a 15% subsample. The great majority of Korean women support traditional attitudes that one must or should marry. The small group who recommend that one should not marry are mostly the very young or the never married, whose attitudes still may change. However, there are important and probably predictive shifts in favor of more individual decision, especially among the better educated, the young, and the more urban. Traditional reasons for marriage such as "custom" and procreation are ranked first by a majority, but there is a large shift to more contemporary or liberal desire for companionship and love, also primarily among the better educated, the urban, the young, and the never married. The traditional attitude that parents should have the sole or major role in mate selection is still held by a bare majority; the educated, urban, young, and never married are more liberal. Only 6% opt for each of the two extremes: That the parent alone or the respondent alone should decide. The remainder prefer one of the two middle-of-the-road positions where parent and child together decide. The proportions of respondents who classed specified criteria as moat important for selecting a husband, arranging the criteria in order from traditional to contemporary were: Lineage, etc., 23%; personal attributes, 40%; health and education, 27%; and love, 10%. The changing attitudes are suggested by the fact that love was ranked first by only 3% of the poorly educated rural poulation versus 23% of urban college level and 31% of the urban never married. There has been a substantial rise in the ideal age of marriage over the past twelve or more years, but there also is evidence that the ideal age is at or near a ceiling. Knowledge about legal age of marriage is minimal; the implications of this for proposed legislation are discussed. Three-fifthes to four-fifths of all respondents married husbands of the same religious, residential, and economic backgrounds as themselves. Almost all of them married men of the same or higher educational level. These evidences of traditional influences in mate selection are contrasted with the low priority given some of those items in earlier questions on reasons for marriage and criterion for selecting husband. Contrary to the expressed attitudes as to who should select the husband, we find that marriages of the study sample were stated to be arranged by parents alone in 62%; and in another 23%, the parents made the decision but asked the respondent's views. Such arrangements were most frequent among the rural, the less educated, and the older respondents and less common in the urban and more educated. The implications of these and related findings are discussed.

  • PDF

Curing Behavior and Interfacial Properties of Electrodeposited Carbon Fiber/Epoxy Composites by Electrical Resistivity Measurement under Tensile/Compressive Tests (전기증착된 탄소섬유/에폭시 복합재료의 인장/압축 하중하에서의 전기저항 측정법을 이용한 경화 및 계면특성)

  • Park, Joung-Man;Lee, Sang-Il;Kim, Jin-Won
    • Journal of Adhesion and Interface
    • /
    • v.2 no.1
    • /
    • pp.9-17
    • /
    • 2001
  • Curing behavior and interfacial properties were evaluated using electrical resistance measurement and tensile/compressive fragmentation test. Electrical resistivity difference (${\Delta}R$) during curing process was not observed in a bare carbon fiber. On the other hand, ${\Delta}R$ appeared due to the matrix contraction in single-carbon fiber/epoxy composite. Logarithmic electrical resistivity of the untreated single-carbon fiber composite increased suddenly to the infinity when the fiber fracture occurred under tensile loading, whereas that of the ED composite reached relatively broadly up to the infinity. Comparing to the untreated case, interfacial shear strength (IFSS) of the ED treated composite increased significantly in both tensile fragmentation and compressive Broutman test. Microfailure modes of the untreated and the ED treated fiber composite showed the debonding and the cone shapes in tensile test, respectively. For compressive test, fractures of diagonal slippage were observed in both untreated and the ED treated composite. Sharp-end shape fractures exhibited in the untreated composite, whereas relatively dull fractures showed in the ED Heated composite. It is proved that ED treatments affected differently on the interfacial adhesion and microfailure mechanism under tensile/compressive tests.

  • PDF

Finite Element Analysis of Reinforced Concrete Masonry Infilled Frames with Different Masonry Wall Thickness Subjected to In-plane Loading (채움벽 두께에 따른 철근콘크리트 조적채움벽 골조의 면내하중에 대한 유한요소해석)

  • Kim, Chungman;Yu, Eunjong;Kim, Minjae
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.29 no.1
    • /
    • pp.85-93
    • /
    • 2016
  • In this study, finite element analyses of masonry infilled frames using a general purpose FE program, ABAQUS, were conducted. Analysis models consisted of the bare frame, infilled frames with masonry wall thickness of 0.5B and 1.0B, respectively. The masonry walls were constructed using the concrete bricks which were generally used in Korea as infilled wall. The material properties of frames and masonry for the analysis were obtained from material tests. However, four times increased the tensile strength was used for 1.0B wall, which is seemingly due to the differences in locating the bricks. The force-displacement relation and development of crack from the FE analysis were very similar to those from the experiments. From the FEA results, contact force between the frame and masonry, distribution of shear force and bending moments in frame members were analyzed. Obtained contact stress shows a trianglur distribution, and the contact length for 0.5B speciment and 1.0B specimen were close to the value estimated using ASCE 41-06 equation and ASCE 41-13 equation, respectively. Obtained shear force and bending moment distribution seems to replicate actual behavior which originates from the contact stress and gap between the frame and masonry.

The Detection of Magnetic Properties in Blood and Nanoparticles using Spin Valve Biosensor (스핀밸브 바이오 센서를 이용한 혈액과 나노입자의 자성특성 검출)

  • Park, Sang-Hyun;Soh, Kwang-Sup;Ahn, Myung-Cheon;Hwang, Do-Guwn;Lee, Sang-Suk
    • Journal of the Korean Magnetics Society
    • /
    • v.16 no.3
    • /
    • pp.157-162
    • /
    • 2006
  • In this study, a high sensitive giant magnetoresistance-spin valve (GMR-SV) bio-sensing device with high linearity and very low hysteresis was fabricated by photolithography and ion beam deposition sputtering system. Detection of the Fe-hemoglobin inside in a red blood and magnetic nanoparticles using the GMR-SV bio-sensing device was investigated. Here a human's red blood includes hemoglobin, and the nanoparticles are the Co-ferrite magnetic particles coated with a shell of amorphous silica which the average size of the water-soluble bare cobalt nanoparticles was about 9 nm with total size of about 50 nm. When 1 mA sensing current was applied to the current electrode in the patterned active GMR-SV devices with areas of $5x10{\mu}m^2 $ and $2x6{\mu}m^2 $, the output signals of the GMRSV sensor were about 100 mV and 14 mV, respectively. In addition, the maximum sensitivity of the fabricated GMR-SV sensor was about $0.1{\sim}0.8%/Oe$. The magnitude of output voltage signals was obtained from four-probe magnetoresistive measured system, and the picture of real-time motion images was monitored by an optical microscope. Even one drop of human blood and nanopartices in distilled water were found to be enough for detecting and analyzing their signals clearly.

Removal of Metallic Impurity at Interface of Silicon Wafer and Fluorine Etchant (실리콘기판과 불소부식에 표면에서 금속불순물의 제거)

  • Kwack, Kwang-Soo;Yoen, Young-Heum;Choi, Seung-Ok;Jeong, Noh-Hee;Nam, Ki-Dae
    • Journal of the Korean Applied Science and Technology
    • /
    • v.16 no.1
    • /
    • pp.33-40
    • /
    • 1999
  • We used Cu as a representative of metals to be directly adsorbed on the bare Si surface and studied its removal DHF, DHF-$H_2O_2$ and BHF solution. It has been found that Cu ion in DHF adheres on every Si wafer surface that we used in our study (n, p, n+, p+) especially on the n+-Si surface. The DHF-$H_2O_2$ solution is found to be effective in removing metals featuring high electronegativity such as Cu from the p-Si and n-Si wafers. Even when the DHF-$H_2O_2$ solution has Cu ions at the concentration of 1ppm, the solution is found effective in cleaning the wafer. In the case the n+-Si and p+-Si wafers, however, their surfaces get contaminated with Cu When Cu ion of 10ppb remains in the DHF-$H_2O_2$ solution. When BHF is used, Cu in BHF is more likely to contaminate the n+-Si wafer. It is also revealed that the surfactant added to BHF improve wettability onto p-Si, n-Si and p+-Si wafer surface. This effect of the surfactant, however, is not observed on the n+-Si wafer and is increased when it is immersed in the DHF-$H_2O_2$ solution for 10min. The rate of the metallic contamination on the n+-Si wafer is found to be much higher than on the other Si wafers. In order to suppress the metallic contamination on every type of Si surface below 1010atoms/cm2, the metallic concentration in ultra pure water and high-purity DHF which is employed at the final stage of the cleaning process must be lowered below the part per trillion level. The DHF-$H_2O_2$ solution, however, degrades surface roughness on the substrate with the n+ and p+ surfaces. In order to remove metallic impurities on these surfaces, there is no choice at present but to use the $NH_4OH-H_2O_2-H_2O$ and $HCl-H_2O_2-H_2O$ cleaning.

Denudation Characteristics of the Rockily Eroded Mountains in Seoul Metropolitan Area (수도권지역(首都圈地域) 산지암반사면(山地岩盤斜面)의 황폐특성(荒廢特性)에 관한 기초적(基礎的) 연구(硏究))

  • Woo, Bo Myeong
    • Journal of Korean Society of Forest Science
    • /
    • v.76 no.1
    • /
    • pp.17-26
    • /
    • 1987
  • To develop the rehabilitation measures for rockily denuded forest lands which are widely distributed in Seoul metropolitan area, erosional characteristics of denudation should, first of all, be evaluated and analysed. As a fundamental study for developing such technical measures, the rockily denuded lands were classified into 6 types according to denudation features of the mountain land, and also movements of stone debris-and-sand on rock-exposed hillslopes were measured and analysed. The 6 basic types of denudation features include a) natural rock-outcrop-exposed land, b) stone debris-and-sand scattered land, c) stone debris-and-sand deposited land, d) coarse sand producing bare land susceptible to weathering and erosion, e) dwarfed pine growing land, and f) torrential valley susceptible to the debris slides. In the stone debris-and-sand scattered hillslopes (type b), average amount of moved-down debris reached to about 3.9 ton/ha/yr due to surface washing and slidings. In the particle size distribution of the moved-down debris, it amounts to about 25% of 10-25mm, about 15% of 5-10mm, about 24% of 2-5mm, and about 36% of less than 2mm in diameter class, respectively. The detailed experimental studies should be accomplished further more about the denudation processes including weathering, erosion and debris slides on rock-exposed hillslopes.

  • PDF

Development of New Materials of Ginseng by Nanoparticles

  • Yang, Deok Chun;Mathiyalagan, Ramya;Yang, Dong Uk;Perez, Zuly Elizabeth Jimenez;Hurh, Joon;Ahn, Jong Chan
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2018.04a
    • /
    • pp.3-3
    • /
    • 2018
  • For centuries, Panax ginseng Meyer (Korean ginseng) has been widely used as a medicinal herb in Korea, China, and Japan. Ginsenosides are a class of triterpene saponins and recognized as the bioactive components in Korean ginseng. Ginsenosides, which can be classified broadly as protopanaxadiols (PPD), protopanaxatriols (PPT), and oleanolic acids, have been shown to flaunt a vast array of pharmacological activities such as immune-modulatory, anti-inflammatory, anti-tumor, anti-diabetic, and antioxidant effects. In recent years, a number of ginseng and ginsenoside researches have increasingly gained wide attention owing to its unique pharmacological properties. Although good efficacies of ginsenosides have been reported, lack of target specific delivery into tumor sites, low solubility, and low bioavailability due to modifications in gastro-intestinal environments limit their biomedical application in clinical trials. As a result to this major challenge, nanotechnology and drug delivery techniques play a significant role to solve this problematic issue. Thus, we reported the preparation of poly-ethylene glycol (PEG) and glycol chitosan (GC) functionalized to ginsenoside (Compound K and PPD) conjugates via hydrolysable ester bonds with improved aqueous solubility and pH-dependent drug release. In vitro cytotoxicity assays revealed that PEG-CK, and PPD-CK conjugates exhibited lower cytotoxicity compared to bare CK and PPD in HT29 cells. However, GC-CK conjugates exhibited higher and similar cytotoxicity in HT29 and HepG2 cells. Furthermore, GC-CK-treated RAW264.7 cells did not exhibit significant cell death at higher concentration of treatment which supports the biocompatibility of the polymer conjugates. They also inhibited nitric oxide production in lipopolysaccharide (LPS)-induced RAW64.7 cells. In addition to polymer-ginsenoside conjugates, silver (AgNps) and gold nanoparticles (AuNps) have been successfully synthesized by green chemistry using different m. The biosynthesized nanoparticles demonstrated antimicrobial efficacy, anticancer, anti-inflammatory, antioxidant activity, biofilm inhibition, and anticoagulant effect. Special interest on the effective delivery methods of ginsenoside to treatment sites is the focus of metal nanoparticle research.In short, nano-sizing of ginsenoside results in an increased water solubility and bioavailability. The use of nano-sized ginsenoside and P. ginseng mediated metallic nanoparticles is expected to be effective on medical platform against various diseases in the future.

  • PDF