• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.3
• /
• pp.158-164
• /
• 2001

The purpose of this study was to assess the runoff of nitrogen derived from pig manure under upland condition. Bare and maize cultivated conditions were compared to estimate the effect of plant on the runoff loss of nitrogen and other nutrients by application of pig manure. Soil used in this experiment was sandy loam, and the fermented pig manure was applied at the rate of 0, 50, and $100ton\;ha^{-1}$. The amount of runoff was measured after every rainfall and water samples were analyzed for nitrate and other cations. Runoff was increased with the rainfall, but was depended on the application rate of pig manure at both bare and maize cultivated plots. Concentrations of nitrate in runoff at 0, 50 and $100ton\;ha^{-1}$ application of pig manure were higher at the maize cultivated plots than those at bare plots by 86.9, 42.9, and 33.6%, respectively. However, total mass of nitrate by runoff loss was higher at the bare plot ranging from 1.34 to $3.15kg\;NO_3-N\;ha^{-1}$. The equivalent ratio of nitrate to sum of cations in runoff was higher at the bare plot than that of maize cultivated plots. The concentration of cations in runoff was in the order of K> Mg> Na> Ca.

• Journal of the Korean Geographical Society
• /
• v.41 no.6 s.117
• /
• pp.657-669
• /
• 2006

Rates and processes of bare patch denudation were observed at Janggumokoreum(1,710m) and Minoruem(1,600m) in order to clarify some characteristics of turf exfoliation in the subalpine grassland of Mt. Halla. The bare patches have marginal terrace fronts with a maximum height of 85 cm. The terrace risers usually develop an overhanging edge 2 to 38 cm long that eventually hangs down and protects the riser beneath. The patches are largely covered with angular pebbles and cobbles. The mean rate of riser retreat for the period 2002-2004 is 39.2 mm, equivalent to 19.6 mm/yr. However, there is a disparity of the rate of riser retreat at individual sites. The maximum rate is 131 mm measured at Janggumokoreum patch while the minimum rate is 0 mm at Minoreum patch. The rate of riser retreat also varies with seasons. The thawing season of April exhibits a maximum rate of retreat. The freezing season of October and November and the rainy season of June and July show relatively high rates of retreat. Several Processes such as frost action, aeolian deflation, rainwash, rainsplash and fauna activity cause the denudation of bare patches. In particular, the needle ire action which is combined with rainwash or deflation plays a primary role in turf exfoliation due to the diurnal freeze-thaw cycles occurred over 100 days, melted snow and strong wind in the subalpine zone of Mt. Halla. Rainwash is also an important contributing process in the rainy season because Mt. Halla has the highest precipitation in Korea. By contrast, rainsplash erosion has a minor effect on the bare patch denudation due to the overhanging edge of terrace risers. Recent increase in roe deer appears to be responsible for turf destruction.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.60-66
• /
• 2006

The purpose of this paper is to evaluate potential application of Lightweight Piezo-composite Actuator (LIPCA) to suppress vibrations of structures. The LIPCA, consisting of a piezoelectric layer, a carbon/epoxy layer and glass/epoxy layers, has advantages in terms of high performance, durability and reliability, compared to the bare piezoelectric ceramic (PZT) actuator. We performed two kinds of experiments on static actuation and active vibration suppression to investigate the actuation performances of the LIPCA and the bare PZT. We attached the actuator on one side and a strain gage on the other side of an aluminum beam. In the static actuation test, we evaluated the performance by comparing equivalent actuation moments of the LIPCA and the bare PZT due to the applied voltage. In the active vibration control test, control signals were generated to suppress the vibration of the beam by the PID control algorithm based on the measured strain signals. The performances were estimated based on settling times of the strain responses. It can be concluded that the LIPCA has better actuation performances than the bare PZT in active control of free vibration as well as static actuation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.325-333
• /
• 2007

To find out the planting times for the economic yield of a super sweet corn hybrid, "Cambella 90" was planted from 1 April of 2003 and 2004 at the 10 days intervals under black polyethylene (P. E.) film mulch and in bare soil in Gyeongsan. Daily maximum soil temperature under black P. E. film mulch was lower, while daily minimum soil temperature was higher compared to bare soil. Soil moisture content under black P. E. film mulch maintained optimum level longer than in bare soil. Emergence rate, percent stand, culm length, and the number of marketable ears were higher under black P E. film mulch compared to bare soil. Silking date under black P. E. film mulch was earlier compared to bare soil by $4{\sim}6$ days at April plantings, while only 1 day earlier at June plantings. Silking date of individual plants in a plot ranged $3{\sim}5$ days depending on planting dates and soil mulch in the same plot. The number of large ears decreased as planting dates delayed. Considering emergence rate and the number of marketable ears, the planting time for the economic yield of a super sweet com hybrid, "Cambella 90" ranged 1 April to 20 June in the southern part of Korea.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.2
• /
• pp.151-160
• /
• 2014

The purpose of this study was to investigate the GRF(ground reaction force) parameters according to the shoes's heel heights and ground landing distances during downward stairs on bus. Participants selected as subject were consisted of young and healthy women(n=9, mean age: $21.30{\pm}0.48$ yrs, mean height: $164.00{\pm}3.05cm$, mean body mass: $55.04{\pm}4.41kg$, mean BMI: $20.47{\pm}1.76kg/m^2$, mean foot length: $238.00{\pm}5.37mm$). They were divided into 2-types of shoe's heel heights(0 cm/bare foot, 9 cm) and also were divides into downward stairs with 3 types of landing distance(20 cm, 35 cm, 50 cm). A one force-plate was used to collect the GRF(AMTI, USA) data from the sampling rate of 1000 Hz. The GRF parameters analyzed were consisted of the medial-lateral GRF, anterior-posterior GRF, vertical GRF, loading rate, Center of Pressure(${\Delta}COPx$, ${\Delta}COPy$, COP area) and Dynamic Postural Stability Index(MLSI, APSI, VSI, DPSI) during downward stairs on bus. Medial-lateral GRF and vertical GRF didn't show significant differences statistically according to the shoe's heel heights and landing distance, but 9 cm shoes heel showed higher vertical GRF than that of 0 cm bare foot in landing distance of 50 cm. Also anterior-posterior GRF didn't show significant difference statistically according to the shoe's heel heights, but landing distance of 20 cm showed higher than that of landing distances of 35 cm and 50 cm in anterior-posterior GRF. Loading rate didn't show significant difference statistically according to the landing distance, but 9 cm shoe's heel showed higher than that of 0 cm bare foot during downward stairs. The ${\Delta}COPy$ and COP area didn't show significant differences statistically according to the shoe's heel heights and landing distance, but 0 cm bare foot showed higher than that of 9 cm shoe's heel in ${\Delta}COPx$. Dynamic Postural Stability Index(MLSI, APSI, VSI, DPSI) didn't show significant differences statistically according to the landing distance, but 9 cm shoe's heel showed decreased value than that of 0 cm bare foot in dynamics balance. Considering the above, parameters of GRF showed different characteristics according to the shoe's heel heights and ground landing distances during downward stairs on bus.

• Asian Journal of Turfgrass Science
• /
• v.20 no.2
• /
• pp.203-211
• /
• 2006

This study was initiated to investigate the difference of playing ability among soccer fields established with natural turfgrass, artificial turf and bare ground. The soccer fields with natural turfgrasses were established with cool-season grass(Kentucky bluegrass 80%+Perennial ryegrass 20%) and zoysiagrass. The artificial turf field was constructed with Konigreen $DV5000^{TM}$. Bare ground was sandy soil. Data such as ball rolling distance and vertical ball rebound were collected at the Sports Science Town of Konkuk University from 2005 to 2006. A ball in the study was Hummel Air Vision #1, certified by KFA(Korea Football Association) in ball pressure of 1.01b. Ball rolling distance was the longest on bare ground(13.6m), followed by artificial grass(11.4m), cool-season grass(7.8m) and zoysiagrass(4.7m). It decreased with lower frequency in use, stronger rigidity and higher density of turfgrass. Vertical ball rebound was the highest on bare ground(1.0m), followed by artificial grass(0.9m), cool-season grass(0.6m) and zoysiagrass(0.4m). It was lower under conditions of low use frequency, strong rigidity, and high density. Both ball rolling distance and vertical ball rebound were not greatly affected by cool-season grass maintained with high intensity of culture by years after establishment. However, zoysiagrass field under low intensity of culture showed longer in ball rolling distance and higher in vertical ball rebound with time after establishment.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 1983.02b
• /
• pp.107-124
• /
• 1983

• Korean Circulation Journal
• /
• v.54 no.8
• /
• pp.513-514
• /
• 2024

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.304-313
• /
• 2000

This study presents the behavior of traditional wood structures of national heritage under earthquake loadings. A series of experimental program for four wood frames was performed to investigate characteristics of initial stiffness, behavior after ultimate loads, and hysteretic behaviors. The frames consisted of columns with a lintel by special joint and a bare frame was infilled by a mud wall. A pushover est was aimed to estimate the range of ultimate rotation of connection as a pilot test for cyclic load tests. One of frames infilled by a mud wall showed a larger stiffness than those of bare frames due to a strut action in the diagonal direction. However, the post yielding stiffness of the infilled frame was not increased.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.142-147
• /
• 2006

3D 센서테이블은 디스플레이가 내장된 테이블 위에서 사용자의 맨손이 움직일 때 그것을 감지하고 반응하는 센싱정보를 처리하도록 만든 것으로 양안시차 방식의 3 차원 입체영상에서 보여지는 가상의 오브젝트와 사람과의 인터렉션이 가능하도록 설계되었다. 본 연구에서는 3 차원 공간에서의 맨손을 이용한 사람과 컴퓨터 간의 인터렉션 방법에 중점을 두고 있는데 맨손의 위치정보와 제스처를 알기 위해서 Electric Field Sensing 기법을 이용하였다. 현재 구현된 3D 센서테이블은 테이블로부터 30cm 이내의 거리에서 움직이는 맨손의 위치와 간단한 제스처를 인식할 수 있다. 이를 통해서 기존의 마우스나 키보드가 가졌던 3 차원 공간에서 사용할 때 불편했던 점들을 해소하고, 직관적이면서도 누구나 사용하기에 쉬운 인터페이스 방법을 제시함으로써 사람과 컴퓨터와의 인터렉션 방법을 확장시킬 수 있다. 또한 기존의 많은 연구에서 맨손을 이용한 기법들이 주로 2D 기반이었던 것에 비하여 본 시스템은 2D뿐 아니라 3 차원 공간에서도 활용할 수 있다는 장점을 가진다.