• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.873-876
• /
• 2001

Micro-robots using microprocessor are mainly classified as line-tracer, micro-mouse, and war-robot. This paper presents the development of the war-robot mechanism with vehicle-style using RC-servo motors and actuators using 4-bar linkage and infrared sensors. Especially the algorithm of conquering other war-robots is proposed based on the skill of belly-throw of Korean wrestling.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.473-476
• /
• 2016

In this study, important design factors in Jansen leg mechanism by which two legs can be driven by only one input like a motor are considered through method of transmitting motion in three-bar linkage and Grashof law in four-bar linkage. In preliminary design, by using EDISON m-sketch and its simulation which can observe trace of feet, two identical four-bar linkages are initially designed and two three-bar linkages are added to four-bar linkages sequentially. By analyzing GL(Ground Length) and GAC(Ground Angle Coefficient), the adequacy of the preliminary design was estimated. Final design of walking apparatus is implemented using CAD software, Assembly2 of EDISON Designer. Finally, proposals to improve software used in this study are suggested.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.524-527
• /
• 2002

This paper is on the development of an educational 6-axis articulated manipulator using 4-bar linkage system. Especially, the 2$^{nd}$ and the 3$^{rd}$ axes need large torque to control the movement of an end-effect. However, small motors (RC-servo, DC-gear, stepping meters) are used for the 4-bar linkage. In addition the manipulator can be operated by a switch and also motion can be realized automatically, based on C-language coded users programs..

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.576-584
• /
• 2009

Up to now, it has been said that no satisfactory computer solution has been found for synthesizing four-bar linkage based on the prescribed coupler link curve. In our study, an algorithm has been developed to improve the design synthesis of four bar linkage based on the 5 precision points method. The suggested algorithm generates the desired coupler curve by using NURBS, and then the generated curve approximates as closely as possible to the desired curve representing coupler link trajectory. Also, when comparing each generated curve by constructing the control polygon, rapid comparison is easily achieved by applying convex hull of the control polygon. Finally, an optimization process using ADS is incorporated into the algorithm based on the 5 precision point method to reduce the total optimization process time. As for examples, two four bar linkages were tested and the result well demonstrated the effectiveness of the algorithm.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.591-596
• /
• 2022

Since 4-bar linkage widely used in various industrial fields has a fixed link length, it is inconvenient to add an independent link structure or control device to change the movement of output link. Therefore, this paper proposes a new concept of variable 4-bar linkage mechanism to selectively adjust the movement of the output link to fit desired situations, and applied to the commercial table fans, which is a representative product using a 4-bar linkage system. The optimal rotation angle steps for efficiency are determined experimentally and the appropriate lengths of linkage to fit each step are calculated analytically. Changes in the linkage length are implemented by the rotational motion using a grooved cylindrical cam and the feasibility of the proposed variable linkage mechanism is verified through fabrication and measurement. The presented variable link mechanism is expected to improve the efficiency of industrial robots and fuel valve systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.126-131
• /
• 1999

Up until now, it is said that no satisfactory computer solutions have been found for synthesizing four-bar linkage based on the prescribed coupler link curve. In our study, an algorithm has been developed to improve the design synthesis of four-bar linkage automatically generating prescribed path by using B-spline interpolation. The suggested algorithm generates the desired coupler curve by using B-spline interpolation, and hence the generated curve approximates as closely as to the desired curve representing coupler link trajectory. Also, when comparing each generated polygon with the control polygon, rapid comparison by applying convex hull concept. finally, optimization process using ADS is incorporated into the algorithm based on the 5 precision point method to reduce the total optimization process time. As for examples, three different four-bar linkages were tested and the results showed the effectiveness of the algorithm.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.476-478
• /
• 2015

This paper deals with synthesis of 4 bar linkage by using optimum design. To design 4 bar linkage, overlay method is proposed and for optimization, genetic algorithm is applied with objective function. The accuracy of this method will be determined by errors between real value and test value. We will use Chebychev spacing to get 3 precision positions of input angles. The output angles will be determined by the function that the designer wants input and output relations to be. It will be applied to example to show the accuracy of this method. The advantages of using this method are that it is fast to get optimal solution and it is simple to use.

• Advances in Computational Design
• /
• v.4 no.3
• /
• pp.197-210
• /
• 2019

Motion generation of a four-bar linkage is a type of mechanism synthesis that has a wide range of applications such as a pick-and-place operation in manufacturing. In this research, the use of meta-heuristics for motion generation of a four-bar linkage is demonstrated. Three problems of motion generation were posed as a constrained optimization probably using the weighted sum technique to handle two types of tracking errors. A simple penalty function technique was used to deal with design constraints while three meta-heuristics including differential evolution (DE), self-adaptive differential evolution (JADE) and teaching learning based optimization (TLBO) were employed to solve the problems. Comparative results and the effect of the constraint handling technique are illustrated and discussed.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.317-325
• /
• 2011

This study aims to develop the stance-control typed 4-bar linkage orthotic knee joint that replace the locked orthotic knee joint for the disabled with poliomyelitis and muscle weakness of lower limb. Unlike the existing stance-control orthotic knee joint, there are no needs of electric power, connecting circuit, bulky compomnets, etc, because this 4-bar linkage orthotic knee joint is controled by geometric locking. To evaluate the 4-bar linkage orthotic knee joint, a subject participated in this study who has been diagnosed with lower limb poliomyelitis and have used locked type orthotic knee joint. In the results of analysis of subject's gait using 3-dimentional motion analysis system, this 4-bar linkage orthotic knee joint provide the stability during stance phase and knee flexion during swing phase.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.9
• /
• pp.961-968
• /
• 2013

In this paper, we propose an optimal design for starfish capturing manipulator module with four-bar linkage mechanism. A tool link with compliance is attached on the four-bar linkage, and the tool repeats detaching starfish from the ground and putting it into the storage box. Since the tool is not rigid and the manipulator is operating underwater, the trajectory of the tool tip is determined by its dynamics as well as kinematics. We analyzed the trajectory of the manipulator tool tip by quasi-static analysis considering both kinematics and dynamics. In optimization, the lengths of each link and the tool stiffness are considered as control variables. To maximize the capturing ability, capturing stroke of the four-bar manipulator trajectory is maximized. Reaction force and reaction moment, and other kinematic constraints were considered as inequality constraints.