• 한국해양공학회지
• /
• 제34권3호
• /
• pp.155-166
• /
• 2020

Ductile fracture prediction is critical for the reasonable damage extent assessment of ships and offshore structures subjected to accidental loads, such as ship collisions and groundings. A fracture model combining the Hosford-Coulomb ductile fracture model with the domain of solid-to-shell equivalence model (HC-SDDE), was used in fracture simulations based on shell elements for the punching fracture experiments of unstiffened and stiffened panels. The flow stress and ductile fracture characteristics of JIS G3131 SPHC steel were identified through tension tests for flat bar, notched tension bar, central hole tension bar, plane strain tension bar, and pure shear bar specimens. Punching fracture tests for unstiffened and stiffened panels are conducted to validate the presented HC-DSSE model. The calibrated fracture model is implemented in a user-defined material subroutine. The force-indentation curves and final damage extents obtained from the simulations are compared with experimental results. The HC-DSSE fracture model provides reasonable estimations in terms of force-indentation paths and residual damage extents.

• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.41-51
• /
• 2004

FRP re-bar in concrete structures could be used as a substitute of steel re-bars for that cases in which aggressive environment produce high steel corrosion, or lightweight is an important design factor, or transportation cost increase significantly with the weight of the materials. But FRP fibers have only linearly elastic stress-strain behavior; whereas, steel re-bar has linear elastic behavior up to the yield point followed by large plastic deformation and strain hardening. Thus, the current FRP re-bars are not suitable concrete reinforcement where a large amount of plastic deformation prior to collapse is required. The main objectives of this study in to evaluate the tensile behavior and the fracture mode of hybrid FRP re-bar. Fracture mode of hybrid FRP re-bar is unique. The only feature common to the failure of the hybrid FRP re-bars and the composite is the random fiber fracture and multilevel fracture of sleeve fibers, and the resin laceration behavior in both the sleeve and the core areas. Also, the result of the tensile and interlaminar shear stress test results of hybrid FRP re-bar can provide its excellent tensile strength-strain and interlaminar stress-strain behavior.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권2호
• /
• pp.125-130
• /
• 2009

For many years, intermaxillary fixation using arch bar has been operated in treatment of mandibular fracture patients. But it has many complications including injury of operators and assistants cause by wire, inflammation of periodontium. For that reasons alternatives are required; osteosynthesis technique using mini plate, intermaxillary fixation using IMF screws have been available. Treatment by arch bar fixation, however, is still valuable to treat craniomaxillary fracture patients. The purpose of this study is to know effect arch bar on periodontium and influence gingival gel on periodontium applied by arch bar. 40 mandibular fracture patients are monitored. 30 patients were applied by arch bar, 10 patients were not. And the former were classified by 3 categories; Nano vitamin and Mastic gel were applied to 10 patients respectively and any gingival gel was not used to 10 patients. Clinical attachment level, bleeding on probing and periodontal depth of each group were measured and compared before operation and on 2 weeks and 6 weeks after operation. Mann-Whitney U test was used to analyze result which leads to this conclusion. 1. Whether arch bar is applied or not, treatment of mandlbular fracture gave rise to gingivitis, but 6 weeks after operation, gingivitis is restored to the same level as the state before operation. 2. More severe gingivitis appeared when arch bar is applied to mandibular fracture than when it is not. 3. Both gingival gel used in this study can reduce gingivitis which can be caused by arch bar. 4. In this study, Mastic gel is more effective for prevent gingival inflammation cause by arch bar than nano vitamin. In regard to this result, gingivitis is considered to be available because it is reversible and does not induce periodontal disease. Gingival gel is regarded to be helpful for patients applied by arch bar to feel less discomfort.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.69-75
• /
• 2002

Measuring dynamic fracture toughness of brittle and small ceramic specimen is very difficult in a SHPB (Split Hopkinson Pressure Bar). As a countermeasure to this difficulty, a dynamic fracture toughness measuring method by the Chevron-notch ceramic specimen was proposed. Tested chevron specimens were of Chevron notch angles of 90$^{\circ}$, 100$^{\circ}$ and 110$^{\circ}$. Through finite element analysis, shape parameters of the Chevron-notch specimens according to notch angles were calculated. And the static fracture tough1ess of the Chevron-notch alumina specimen was measured as 3.8MPa√m similar to that of CT specimen with a precrack. Dynamic fracture toughness was 4.5MPa√m slightly higher than the static one. It was shown in this study that the proposed Chevron-notch specimens are valid to measure dynamic fracture toughness of extremely brittle materials such as ceramic.

• 화약ㆍ발파
• /
• 제23권2호
• /
• pp.45-56
• /
• 2005

본 연구에서는 철근 콘크리트 기둥 발파시 수직하중과 철근의 영향에 따른 파쇄형태 및 파쇄체적에 대해 축소모형실험을 수행하였다. 수직하중이 증가할수록 수직하중에 의한 수직방향의 인장균열 및 철근에 의한 수직방향의 균열이 발생하였으며, 2.0톤에서는 수직방향의 인장균열이 철근에 의한 수직방향의 균열보다 우세하게 나타났다. 또한 수직하중이 증가할수록 수직방향의 인장균열이 우세하여 철근의 휨정도는 감소하였다. 발파공수가 증가하여도 수직하중에 따른 평균 파쇄체적은 크게 증가하지 않았으며, 이는 철근이 파쇄체적에 영향을 미치는 것으로 판단된다. 따라서 콘크리트 기둥 발파시 수직하중은 콘크리트의 파쇄형태와 철근의 휨정도에 중요한 영향을 미치며 철근은 파쇄체적에 영향을 미친다. 그러므로 철근 콘크리트 기둥 발파해체시 수직하중과 철근의 영향에 따라 천공패턴 및 발파패턴을 조절해야 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1241-1242
• /
• 2010

• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.47-52
• /
• 2008

The force transducer in the acceleration plant due to dynamic fracture is calibrated by dynamically using the stress pulses from a longitudinal bar. The bar is supported by two strings attached to the ceiling. The bar velocities before and after impact are measured and a full bridge at bar and transducer is formed by the four strain gauges. A transient recorder is used to store the stress pulse signals of force transducer and bar. For the first test series, three point bend test specimens can be chosen by means of test rig design and the inspection as sample experiment in this presented paper is sufficient for proving with the numerical simulation of the specimen model.

• Ocean Systems Engineering
• /
• 제3권1호
• /
• pp.1-8
• /
• 2013

This brief study aims at providing a model to predict the time of service of a cracked bar in corrosive environment, in view of both the fracture mechanics and elastic failure criteria. Dolinskii's assumption on the relationship between stress and the corrosion rate is adopted. It is superimposed with fracture mechanics consideration. A comparison between the time of service of a cracked bar and that of a uniform bar is provided.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.198-204
• /
• 2004

Dynamic fracture is investigated in plate applied by impacting bar. Numerical simulations of the experiments are made by using a finite element method(FEM) code, LS-DYNA. The eroding surface-to-surface contact allows between impacting bar and impacted plate. The occurrence of hourglass deformations in an analysis can invalidate results and hourglass energy is minimized to obtain the good accuracy of result. Total, internal and kinetic energies, von Mises plastic stress and X,Y,Z velocities of impacting bar are analyzed in this study.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.80-91
• /
• 1998

In this paper, the estimation of dynamic interlaminar fracture toughness on fracture mode II in CFRP(carbon fiber reinforced plastics) laminates in made. Dynamic ENF(End Notched Flexure) apparatus used in this paper is manufactured by suing Split Hopkinson Pressure Bar. The static and impact load history in the CFRP specimen is measured by using manufactured dynamic ENF tester and 3-point bending test is carried out to find the load history. Also dynamic interlaminar fracture toughness can be found by using the J integral obrained from dynamic analysis in consideration of intertia-force effect.