• 천문학회보
• /
• 제38권2호
• /
• pp.39.1-39.1
• /
• 2013

We use high-resolution hydrodynamic simulations to study nonlinear gas responses to imposed non-axisymmetric stellar potentials in barred-spiral galaxies. The gas is assumed to be infinitesimally thin, isothermal, and unmagnetized. We consider various spiral-arm models with differing strength and pattern speed, while fixing the bar parameters. We find that the extent and shapes of spiral shocks as well as the related mass drift depend rather sensitively on the pattern speed. In models where the arm pattern is rotating more slowly than the bar, the gaseous arms extend from the bar ends all the way to the outer boundary, with a pitch angle slightly smaller than that of the stellar counterpart. The arms drive mass inflows at a rate of ${\sim}0.5-2.5M{\odot}/yr$ to the bar region to which the shock dissipation, external torque, and self-gravitational torque contribute about 50%, 40%, and 10%, respectively. About 85% of the inflowing mass is added to bar substructures such as an inner ring, dust lanes, and a nuclear ring. while the remaining 15% encircles the bar region. On the other hand, models where the arms corotate with the bar exhibit mass outflows, rather than inflows, over most of the arm region. In these models, spiral shocks are much more tightly wound than the stellar arms and cease to exist in the region where $M{\bot}/sinp*{\geq}25-40$, where $M{\bot}$ denotes the Mach number of a rotating gas perpendicular to the arms with pitch angle p*. We demonstrate that the distributions of line-of-sight velocities and densities can be a useful diagnostic tool to distinguish if the arms and bar corotate or not.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.789-794
• /
• 2000

The Paper studies the flow and heat transfer characteristics to a jet impinging at different oblique angles, to a plane surface by numerical methods. The flowfield and heat transfer rate associated with the oblique Impingement of an axisymmetric jet are of interest as a result of its presence in numerous technological Problems. For the computation of heat transfer rate, the standard ${\kappa}-{\varepsilon}$ and ${\kappa}-{\varepsilon}-\bar {{\upsilon}'^ 2}$ turbulent model were adapted. The accuracy of the numerical calculations was compared with various experimental data reported in the literature. ${\kappa}-{\varepsilon}-\bar {{\upsilon}'^ 2}$ model showed better agreement with experimental data than standard ${\kappa}-{\varepsilon}$ model in prediction of the turbulent intensity and the heat transfer rate. In the case of computation of flowfield, the study carries on the ${\alpha}=45$ deg, h/D=4.95. The jet Reynolds number based on the nozzle diameter(D), was 48,000. For the computation of heat transfer rate, the Re=20,000, the jet orifice-to-plate spacings(L/D) are 4, 6 and 10, and the angle between the axis of the jet orifice and the plate surface is set at 30, 45, 60, or 90 deg. For the smaller spacings, the near-peak Nusselt numbers are not significantly effected by the initial decreases in the Jet angle. The overall shape of the local Nusselt number x-axis profile is influenced by both the jet orifice-to-plate spacing and the jet angle.

• 대한기계학회논문집A
• /
• 제37권1호
• /
• pp.97-103
• /
• 2013

본 연구는 원추대 가공과 등가인 동시 5 축 구동을 통한 볼바 측정용 경로 생성 기법을 소개하며 시스템 구조 형태(Structural configuration)에 관계없이 모든 5 축 공작기계에 대해 적용 가능한 일반화된 방법을 제시한다. 5 축 공작기계 시스템 정보와 원추형 정보, 그리고 볼바 측정 정보 등을 입력 받아 NC 코드 생성, 다양한 오차 평가 시뮬레이션 및 측정 시험을 쉽게 수행할 수 있도록 원호 경로 생성에 필요한 수학적 기계 입력 모델을 제시한다. 또한 제시된 원추형 경로 모델을 토대로 5 축 동시 구동 시 회전축의 이송 범위를 수학적으로 검토하며 반꼭지각 및 기울기각의 크기 차이, 볼바 틸팅 허용각 및 워크피스 볼의 오프셋 위치 등 여러 가지 조건이 이송 범위에 미치는 영향에 대해 분석한다.

• 문화기술의 융합
• /
• 제8권5호
• /
• pp.591-596
• /
• 2022

다양한 산업분야에서 사용되는 4절 링크기구는 링크 길이가 고정되어 있으므로 기구의 움직임을 변경하기 위해서는 독립적인 링크기구나 제어장치를 추가해야 하는 불편함이 있다. 따라서 본 논문에서는 상황에 따라 링크기구의 운동을 선택적으로 제어할 수 있도록 링크 길이가 조절되는 가변형 4절 링크기구를 설계하였으며 링크기구에 의해 구동되는 제품인 선풍기에 적용하여 그 타당성을 검증하였다. 바람 범위의 효율성을 고려하여 선풍기 회전각도를3단계로 분할하였으며 각 구간에 필요한 링크 길이를 계산하였다. 또한, 원통캠을 이용하여 링크 길이를 조절하였으며 선풍기의 회전각도 조절 작동 여부를 실제 제작 및 측정을 통해 확인하였다. 본 논문에서 제시한 가변형 링크기구는 산업용 로봇이나 연료 밸브 시스템 등과 같은 4절링크 적용 제품의 효율성을 향상시킬 수 있을 것으로 기대된다.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.473-476
• /
• 2016

In this study, important design factors in Jansen leg mechanism by which two legs can be driven by only one input like a motor are considered through method of transmitting motion in three-bar linkage and Grashof law in four-bar linkage. In preliminary design, by using EDISON m-sketch and its simulation which can observe trace of feet, two identical four-bar linkages are initially designed and two three-bar linkages are added to four-bar linkages sequentially. By analyzing GL(Ground Length) and GAC(Ground Angle Coefficient), the adequacy of the preliminary design was estimated. Final design of walking apparatus is implemented using CAD software, Assembly2 of EDISON Designer. Finally, proposals to improve software used in this study are suggested.

• 소성∙가공
• /
• 제8권4호
• /
• pp.331-339
• /
• 1999

In this study, to analyze the shaped drawing process from round bar, the practical conical die with considering die radius and bearing was defined by a mathematical expression, and also a simple technique for initial mesh generation to the shaped drawing process was proposed. The drawing of rectangular section from round bar, one of the shaped drawing process, has been simulated by using non-steady state 3D rigid plastic finite element method in order to evaluate the influence of semi-die angle and reduction in area to corner filling. Other process variables such as friction constant, rectangular ratio, die radius and bearing length were fixed during the simulation. An artificial neural network has been introduced to obtain the optimal process conditions which gave rise to a fast simulation.

• 한국농공학회지
• /
• 제33권2호
• /
• pp.94-103
• /
• 1991

This study was carried out to investigate the engineering characteristics of the R.C circular ring sector plate with various boundary conditions and then to propose a rational and paraical method for application of finite element method to R.C structures. The stiffness matrix of the circular ring sector plate was obtained by using the multi-base coordinate system in which the base-coordinate systems were constructed for each nodal point of the quadrilateral element in order to reflect the complicated boundary conditions conveniently and correctly. The R.C element stiffness matrix was constructed by adding the stiffness coefficients of the steel-bar element into the plate bending element stiffness matrix. Herein, the steel-bar element was treated as the common beam element. Using the above method, the effects of steel-bar can be considered without increasing of the numbers of element and nodal points.

• The Journal of Korean Physical Therapy
• /
• 제14권3호
• /
• pp.355-372
• /
• 2002

The purpose of this study was to evaluate the effect of multiaxial lower extremity orthosis on correction of genu valgum. 20 volunteers among people visited department of Rehabilitation Medicine, chungnam national university hospital, who had been diagnosed as genu valgum without other musculoskeletal problems were included. 10 individuals(mean age: 9.gyrs) who had been taken multiaxial lower extremity orthosis at least 12month were included in experimental group and the other 10 individuals(mean age: 11.7yrs) refused taking this orthosis in the control group. We measured the Q-angle & femorotibial angle using plain roentgenogram images at visiting day and repeat same test after 1year follow up. Multiaxial lower extremity orthosis consist of proximal horizontal bar with both thigh cuff, central vertical bar and distal horizontal bar with both shoes. we narrowed inter-shoes distance from start to 6th month and inter-thigh cuff distance together with above correction for next 6month in the frontal plane and from 10th month, dorsiflexed both shoes in sagittal plane. Also, we rotate the both shoes externally and retract the proximal vertical bar every month. This orthosis have to be taken at least 4 hours during sleep. The result were as follows 1. There were no statistical significant difference in each parameter between the right and left Q-angle before multiaxial lower extremity orthosis. 2. The left Q angle reduced $-11^{\circ}$ between 1st day and after 1year follow up showed statistical significant difference between multiaxial lower extremity orthosis taking group and non-taking(p<0.001). 3. The right Q angle reduced $-13^{\circ}$ between 1st day and after 1year follow up showed statistical significant difference between multiaxial lower extremity orthosis taking group and non-taking(p<0.001). 4. There were no statistical significant difference in each parameter between the right and left femorotibial angle before multiaxial lower extremity orthosis. 5. The left femorotibial angle reduced $-10.1^{\circ}$ between 1st day and after lyear follow up showed statistical significant difference between multiaxial lower extremity orthosis taking group and non-taking(p<0.001). 6. The right femorotibial angle reduced $-11.2^{\circ}$ between 1st day and after 1year follow up showed statistical significant difference between multiaxial lower extremity orthosis taking group and non-taking(p<0.001).

• 항공우주기술
• /
• 제2권2호
• /
• pp.1-10
• /
• 2003

비행선은 주익이 없고 미익에 비해 동체 효과가 큰 형상 특성으로 인해 정적으로 불안정한 특성을 지닌다. 따라서 동안정 특성 예측이 매우 중요하다. 본 연구에서는 강제진동 풍동시험을 통한 비행선의 동안정 특성을 확보하였다. 풍동시험은 미국 BAR사의 독일소재 시설인 BAR LAMP 시설을 사용하였으며, 16회의 정적시험과 26회의 강제진동시험을 수행하였다. 시험결과, 비행선의 동안정 특성은 받음각 뿐만 아니라 옆미끄럼각, 각속도 크기와 방향에 비선형적으로 변한다. 전반적으로 세 방향의 모멘트는 댐핑이 있는 것으로 나타났으며, 수직력과 측력, 교차성분은 불안정하게 나타났다. 조종면의 영향은 작은 것으로 나타났으나 옆미끄럼각의 영향은 완전히 비선형적으로 나타났다.

• 대한치과교정학회지
• /
• 제18권1호
• /
• pp.113-125
• /
• 1988

This study was attempted to individualize upper and lower incisor position appropriate to individual characteristic dento-facial pattern. Lateral cephalometric radiographs of 75 Korean adults with normal occlusion and good facial profile whose ages were over 17 years were traced, digitized, and statistically analysed. The results of this study were as follows; 1. All cephalometric measurements of incise. position and dento-facial pattern for normal occlusion showed wide range of variation. 2. There were no significant differences of incisor position between males and females. 3. Lower incisor position was highly correlated with ANB, N-A-Pog and SN/Mand. pl. angle and upper incisor position, with ANB, N-A-Pog and SN/Occ. pl. angle. 4. Multiple regression equations were established to individualize incisor position appropriate to individual characteristic dento-facial pattern. ANB and N-A-Pog angle were selected as the significant guiding variables affecting upper and lower incisor position. 5. Lower incisor position such as $\bar{1}$ to SN, $\bar{1}$ to occlusal plane and $\bar{1}$ to NPog(mm) and upper incisor position such as $\underline{1}$ to SN, $\underline{1}$ to palatal plane, $\underline{1}$ to NA, $\underline{1}$ to NA (mm) and $\underline{1}$ to NPog(mm) could highly predicted from the variables of dento-facial pattern.