• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.293-298
• /
• 2001

In this paper, film thickness and temperature distribution are measured in EHL point contact at high roll/slip ratios. Infrared temperature mapping with two band pass filters, proposed by Ausherman (1976), is used to measure temperature distribution. And the optical interferometric method with two filters (red and green filters) is used to measure film thickness. Result of experiment showed that temperature rising at film and ball surface occurred very dramatically in Dimple zone. As slip velocity, roll/slip ratio and load increased, size of Dimple and temperature rising became more large. In addition, position and shape of Dimple were changed by roll/slip ratios, and increasing of Dimple size decreased traction coefficient. In short, it is appointed that the Dimple phenomenon be developed by the effect of viscosity wedge.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.592-601
• /
• 2013

이 연구는 3-(1,8나프탈이미도)프로필메타아크릴레이트(NIPM)와 GMA공중합체의 합성과 물성에 관한 과제로서 나프탈이미드 발색단을 가진 공중합체의 조성, 모노머 반응성비, 공명효과(Q)와 극성효과 (e), 형광특성 등을 조사하였다. Azobisisobutyronitronitryl(AIBN) 개시제와 dimethylformamide(DMF) 용매를 $60^{\circ}C$에서 공중합하였다. Fineman-Ross(F-R)와 Kelen-$T\ddot{\bar{u}}d\ddot{\tilde{o}}s$(K-T)법으로 부터 단량체 반응성비를 구하였으며, $r_1$값이 $r_2$보다 크게 나타났다. NIPM이 공중합체내에서 GMA보다 더 많음을 알 수 있다. 380 nm에서 약한 분자형광띠와 460 nm에서 강한 중합체 엑시머 형광띠가 나타났다.

• 천문학회지
• /
• 제45권2호
• /
• pp.39-48
• /
• 2012

We investigate non-LTE effects on the $H_3^+$ level populations to help the analysis of the observed 2 and 3.5 micron $H_3^+$ emissions from the Jovian ionosphere. We begin by constructing a simple three-level model, in order to compute the intensity ratio of the R(3,4) line in the hot band to the Q(1,0) line in the fundamental band, which have been observed in the Jovian auroral regions. We find that non-LTE effects produce only small changes in the intensity ratios for ambient $H_2$ densities less than or equal to $5{\times}10^{11}cm^{-3}$. We then construct two comprehensive models by including all the collisional and radiative transitions between pairs of more than a thousand known $H_3^+$ rovibrational levels with energies less than 10000 $cm^{-1}$. By employing these models, we find that the intensity ratios of the lines in the hot and fundamental bands are affected greatly by non-LTE effects, but the details depend sensitively on the number of collisional and radiative transitions included in the models. Non-LTE effects on the rovibrational population become evident at about the same ambient $H_2$ densities in the comprehensive models as in the three-level model. However, the models show that rotational temperatures derived from the intensities of rotational lines in the ${\nu}_2$ and $2{\nu}_2$ bands may differ significantly from the ambie temperatures in the non-LTE regime. We find that significant non-LTE effects appear near and above the $H_3^+$ peak, and that the kinetic temperatures in the Jovian thermospheric temperatures derived from the observed line ratios in the 2 and 3.5 micron $H_3^+$ emissions are highly model dependent.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.81-81
• /
• 2008

Applications of CdS films in this study are to exhibit a high conductivity when they are exposed at light with visible wavelength and sequentially to show a low conductivity in dark state. For this purpose, CdS films should have a high photosensitivity, still maintaining a high conductivity at a visible light. In this study, CdS films were prepared at room temperature on glass substrates by rf magnetron sputtering. In order to increase the photo-conductivity in visible light, various defect levels should be located within the CdS band gap. In order to nucleate the defect sites within the CdS band gap, CdS films were deposited on glass substrates at room temperature using various $H_2$/(Ar+$H_2$) flow ratios by an rf magnetron sputtering. Through the investigation of the structural and photoconductive properties of CdS films by an addition of hydrogen, the relationship between photo- and dark-resistance in CdS films was investigated in detail. 200-nm-thick CdS films for photoconductive sensor applications were prepared at various $H_2$/(Ar+$H_2$) flow ratios on glass substrates at room temperature by rf magnetron sputtering. Sulfur concentration in CdS films crystallized at room temperature with (002) preferred orientation depends directly on the hydrogen atmosphere and the surface roughness of the films gradually increases with increasing hydrogen atmosphere. Films deposited at 8% of $H_2$/(Ar+$H_2$) exhibit an abrupt decrease of dark- and photo-resistance, showing a low photo-sensitivity ($R_{dark}/R_{photo}$). Onthe other hand, films deposited at a hydrogen atmosphere of 42% exhibit a photo-sensitivity of $5\times10^3$, maintaining a photo-resistance of an approximately $2\times10^4\Omega$/square. The dark- and photo-resistance values of CdS films were related with a composition, surface roughness, and defect sites within the band gap.

• 한국전문물리치료학회지
• /
• 제30권1호
• /
• pp.15-22
• /
• 2023

Background: Delivery workers repeatedly get in and out of trucks and walk or run to deliver packages during work. Iliotibial band syndrome (ITBS) is a well-known non-traumatic overuse injury of the lateral side of the knee caused by frequent knee flexion and extension. Hip muscle strength is among the factors that prevent lower extremity injuries. Although many studies have examined the relationship between ITBS and hip muscle strengths, there was no study comparing hip muscle strength and ratio between delivery workers with and without ITBS. Objects: This study aimed to compare hip muscle strength and hip internal/external rotator and adductor/abductor strength ratios between delivery workers with and without ITBS. Methods: Fourteen delivery workers with ITBS matched inclusion criteria in the present study among 20 participants. Because total sample size was required 28 subjects by G*power program (ver. 3.1.9.4; University of Trier), 14 delivery workers without ITBS were recruited. Hip muscle strengths were measured in a side-lying position using a Smart KEMA pulling sensor (KOREATECH Co. Ltd.). An independent t-test was used to compare hip muscle strengths and hip internal/external rotator and hip adductor/abductor strength ratios between delivery workers with and without ITBS. Results: The adductor/abductor strength ratio was significantly greater in delivery workers without ITBS than in those with ITBS (p < 0.05). The strengths of the hip abductor, hip adductor, hip internal rotator, hip external rotator, and the ratio of internal/external rotator strengths were not significantly different between the delivery workers with and without ITBS (p > 0.05). Conclusion: This study's findings showed that delivery workers with ITBS had significantly lesser adductor/abductor strength ratio, while the strengths of the hip abductor and adductor muscles did not differ significantly. These results suggest that adductor/abductor strength ratio should be considered when evaluating and treating ITBS in delivery workers.

• ALGAE
• /
• 제28권1호
• /
• pp.121-129
• /
• 2013

Intact phycobilisomes from a wild-type red Chondrus crispus and its vegetatively derived green mutant were isolated by centrifugation through a discontinuous sucrose density gradient. Pigment composition was subsequently characterized by spectrophotometry. Vegetative thalli of the two strains grown together for six months in the laboratory resulted in different pigment profiles. Two pigmented phycobilisome bands appeared in the sucrose gradient of the wild-type alga, a purple coloured one, and a pink one, whereas only a single blue band appeared in the gradient of the green mutant. Spectrophotometric and fluorescence analyses identified the phycobiliprotein composition of the purple band as the typical phycoerythrin-phycocyanin-allophycocyanin complement in the wild-type, but there was no detectable phycoerythrin present in the blue band of the green mutant. Sodium dodecyl sulphate, preparative polyacrylamide gel electrophoresis analysis confirmed the presence of allophycocyanin subunits in all extracts, but firm evidence of an R-phycoerythrin linker polypeptide in the blue band was missing. These results highlight the ability of C. crispus to adapt to a phycoerythrin deficiency by adjusting light harvesting pigment ratios.

• 한국재료학회지
• /
• 제19권10호
• /
• pp.522-526
• /
• 2009

Graphene has been effectively synthesized on Ni/SiO$_2$/Si substrates with CH$_4$ (1 SCCM) diluted in Ar/H$_2$(10%) (99 SCCM) by using an inductively-coupled plasma-enhanced chemical vapor deposition. Graphene was formed on the entire surface of the 500 nm thick Ni substrate even at 700 $^{\circ}C$, although CH$_4$ and Ar/H$_2$ gas were supplied under plasma of 600 W for 1 second. The Raman spectrum showed typical graphene features with D, G, and 2D peaks at 1356, 1584, and 2710 cm$^{-1}$, respectively. With increase of growth temperature to 900 $^{\circ}C$, the ratios of the D band intensity to the G band intensity and the 2D band intensity to the G band intensity were increased and decreased, respectively. The results were strongly correlated to a rougher and coarser Ni surface due to the enhanced recrystallization process at higher temperatures. In contrast, highquality graphene was synthesized at 1000 $^{\circ}C$ on smooth and large Ni grains, which were formed by decreasing Ni deposition thickness to 300 nm.

• 한국지리정보학회지
• /
• 제4권1호
• /
• pp.27-33
• /
• 2001

본 연구에서는 시화호, 경기만, 천수만, 진해만에서 SeaWiFS 밴드영역을 가진 수중광학측정장비에 의해 얻어진 자료를 바탕으로 투명도 알고리듬이 구성되었다. 이를 현장관측치와 비교하여 가장 높은 상관계수를 나타내는 밴드를 찾았다. 수중광 반사도 밴드비율은 $R_{rs}$(490/665)의 밴드비율이 실측치와 가장 좋은 상관관계($R^2$=0.8188)를 나타냈다. 현장조사에 의해 얻어진 수중 광학 알고리듬을 위성자료에 적용하기 위해 SeaWiFS 보다 비교적 연안해역을 모니터링하기에 용이한 공간해상력을 가진 Landsat TM의 반사도 자료를 계산하고, 이를 동일시점의 현장관측자료와 비교하였다. 하지만, Landsat TM을 적용한 결과는 실측치와 낮은 상관관계를 나타냈고, 이에 대한 문제점을 제시하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.587-587
• /
• 2013

ZnS is well-known direct band gap II-VI semiconductor, and it attracts intense interest due to its excellent properties of luminescence which enable ZnS to have promising materials for optical, photonic and electronic devices. Especially, the emission wavelength of ZnS falls in the UV absorption band of most organic compoundsand biomolecules, thus it is envisaged that ZnS based devices may find applications in increasingly important fluorescence sensing. We have developed a facile and effective one-step process for the fabrication of single-crystalline and pure-wurtzite ZnS nanostructures possessing sharp band-edge emission at room-temperature having diverse length-to-width ratios. Each of nanostructures was composed of chemically pure, structurally uniform, single-crystalline, and defect-free ZnS. These features not only suppress trap or surface states emission centered at 420 nm, but also enhance UV band-edge emission centered at 327 nm, which give as-synthesized our ZnS nanostructures possible sharp UV emission at room temperature. The reaction medium consisting of mixed solvents such as hydrazine, ethylenediamine, and water as well as proper reaction time and temperature have played an important role in the crystallinity and optical properties of ZnS nanostructures. As-synthesized our ZnS nanostructures possessing sharp UV emission guarantee high potential for both fundamental research and technological applications.

• Earthquakes and Structures
• /
• 제25권4호
• /
• pp.269-282
• /
• 2023

This study investigates a rocking seismic isolation (RSI) system as a seismic protection measure against narrow-band ground-motions generated by earthquakes. Structures supported over RSIs are considered capable of reducing the lateral demands and damage of the main structural system through lifting and rocking. This lifting and rocking during earthquake activity is provided by free-standing columns. A single-degree-of-freedom (SDOF) system supported on a RSI system is subjected to narrow-band seismic motions and its response is compared to an analog system without RSI. The comparison is then extended to reinforced concrete linear frames with and without RSI; three-bay frames with 11 and 17 storeys are considered. It is found that the RSI systems significantly reduce acceleration and displacement demands in the main structural frames, more noticeably if the first structural mode dominates the response and for ratios of the predominant frequency of the ground motion to the predominant frequency of the main frame near one. It is also found that the RSI system is more effective in reducing lateral accelerations and displacements of the main structure when the aspect ratio, b/h, and size, R, of the free-standing columns decrease, although the rocking stability of the RSI system is also reduced.