• 음성과학
• /
• 제11권3호
• /
• pp.131-142
• /
• 2004

Speaker identification system basically functions by comparing spectral energy of an individual production model with that of an input signal. This study aimed to develop a new speaker identification system from two parameters from the spectral energy of numeric sounds: difference sum and correlation coefficient. A narrow-band spectrogram yielded more stable spectral energy across time than a wide-band one. In this paper, we collected empirical data from four male speakers and tested the speaker identification system. The subjects produced 18 combinations of three-digit numeric. sounds !en times each. Five productions of each three-digit number were statistically averaged to make a model for each speaker. Then, the remaining five productions were tested on the system. Results showed that when the threshold for the absolute difference sum was set to 1200, all the speakers could not pass the system while everybody could pass if set to 2800. The minimum correlation coefficient to allow all to pass was 0.82 while the coefficient of 0.95 rejected all. Thus, both threshold levels can be adjusted to the need of speaker identification system, which is desirable for further study.

• 음성과학
• /
• 제9권3호
• /
• pp.3-16
• /
• 2002

We examined some problems in speaker identification procedures: transformation of acoustic parameters into auditory scales, invalid measurement values, and comparability of spectral energy values across the frequency range. To resolve those problems, we analyzed the acoustic spectral energy of three Korean numbers produced by ten female students from narrow-band spectrograms at 19 proportional time points of each voiced segment. Then, cells of the first five spectral matrices were averaged to form a matrix model for each speaker. The correlation coefficients and sum of the absolute amplitude difference in each pair of the spectral models of the ten subjects were obtained. Also, some individual matrix models were compared to those of the same subject or the other subject with a similar spectral model. Results showed that in numbers '2' and '9' subjects could not be clearly distinguished from the others but in number '4' it shed some possibility of setting threshold values for speaker identification if we employed the coefficients and the sum of absolute difference. Further studies would be desirable on various combinations of the range of long-term average spectra and the degree of signal pre-emphasis.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.71-74
• /
• 2022

For the process simplification in the fabrication of organic light emitting diode(OLED), top emission OLED (TEOLED) was fabricated without lithium fluoride(LiF) used as an electron injection layer (EIL). After co-deposition of Mg and Ag with a different process conditions, a cathode material adjacent to EIL was optimized when Mg and Ag have a ratio of 1:9 considering sheet resistance and transmittance. From the energy band diagram of TEOLED, band gap difference between Trisaluminium (Alq3) and Mg:Ag cathode show the difference of 0.4 eV according to the usage of LiF The fabricated TEOLED without LiF showed the improvement of 5.2 % and 2.7 % in the luminance and the current density comparing that with LiF. The results show there is no significant difference in OLED characteristics regardless of LIF layer in the TEOLED structures.

• Journal of Radiation Protection and Research
• /
• 제26권2호
• /
• pp.113-117
• /
• 2001

NaI 스펙트럼으로부터 조사선량을 계산하는 에너지대 방법은 $1300{\sim}3000keV$ 영역의 에너지 스펙트럼을 사용하여 조사선량을 계산하기 때문에 자연방사선만의 조사선량이 계산되어지지만, 총에너지 방법은 $150{\sim}3400keV$ 영역의 에너지 스펙트럼을 사용하기 때문에 인공방사선의 조사선량도 포함하여 계산한다. 따라서 총에너지 방법에 의한 조사선량과 에너지대 방법에 의한 조사선량의 차이는 인공방사선에 의한 조사선량이 될 것이다. 본 연구에서는 인공방사선이 없는 지역에서 단지 기상요인에 의해서 조사선량 변동이 심한 기간동안 NaI 검출기로 스펙트럼을 측정하였다. 이와 같이 측정한 스펙트럼에 대해서 두 방법으로 계산한 조사선량률들은 통계적 변동 ${\pm}0.3{\mu}R\;h^{-1}$ 이내에서 잘 일치하였다. 결과적으로 두 방법에 의해 계산된 조사선량값이 차이가 있다면 그것은 인공방사선에 의한 조사선량으로 해석할 수 있을 것이다.

• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.325-330
• /
• 2019

Band convergence is known to be effective in improving thermoelectric performance by increasing the Seebeck coefficient without significantly reducing electrical conductivity. Decoupling of the Seebeck coefficient and electrical conductivity in converged bands is the key requirement. Yet, the degree of decoupling depends on the band parameters of the converging bands. Herein, we report theoretical transport properties of two valence bands as their energy difference changes from 0.25 eV to 0 eV. In order to demonstrate the effect of band parameters in transport, we first conducted calculations for the case where the two bands have the same parameters. Then, we conducted the same calculation by doubling the density-of-states effective mass of one valence band. Given that there are two bands, each band's effective mass was doubled one at a time while the other band's effective mass remained constant. We found that the decoupling was strongest when the bands participating in convergence had the same band parameters.

• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.59-65
• /
• 2010

In this paper, we investigate acoustic characteristics of Korean /s/ when it is followed by both a high front and a round segment regardless of their order to one another. We show that Korean /s/ in this environment has characteristics of a labio-palatalized segment, being affected by both a high front and a round segment if they occur within the domain of a syllable. In the experiment, we show that Korean /s/ before a high front and a round segment shows a spectral shape different from that in other environments. Specifically, it is different from /s/ before a high front segment only, showing peaks around 2.5 kHz. Furthermore, it shows a rapid decrease of amplitude in 4-5 kHz, and sometimes another plateau of high peaks in 5-6 kHz. We also examined center of gravity frequency and band energy difference. Based on the results of this experiment, we argue that Korean /s/ is affected by the following segments within the domain of coarticulation, a syllable and that the degree of coarticulation is different from language to language.

• 대한전기학회논문지
• /
• 제43권2호
• /
• pp.339-345
• /
• 1994

A new filter-bank is proposed in order to track center frequency of narrow band signal. The two banks are connected in series-parallel. The master filter bank which is made of traditional filter bank detects the center frequency roughly. And the performance for tracking center frequency is greatly improved by the slave filter bank which is based on energy-difference estimator. Computer simulations show that it achieves a good tracking accuracy.

• Journal of the Optical Society of Korea
• /
• 제4권2호
• /
• pp.94-99
• /
• 2000

Optical monitoring using the chromatic aberration of focusing optics is applied to auto-focus control in laser welding. The spectral transmittance of thermal radiation from a weld pool through an aperture depends on the wavelength of the spectral band and on the distance of the weld pool from the focusing optics. Its dependence has been used to monitor the focus shift in laser welding by measuring the spectral band signals filtered by the aperture. The difference between pulsed and continuous laser welding is analyzed. Furthermore, the dependence of the focus shift monitoring on the weld pool size variation is optimized to monitor the focus shift independently from the laser power change at the weld pool. The performance of the auto-focus control with chromatic filtering is presented for pulsed laser welding.

• 한국진공학회지
• /
• 제9권2호
• /
• pp.130-135
• /
• 2000

Photoluminescence(PL)와 photoreflectance(PR)를 이용하여 $Al_{0.25}/Ga_{0.75}/As/In_{0.15}/Ga_{0.85}$/AS/GaAS 슈우도형 고 전자 이동도 트랜지스터 구조에 대한 특성을 조사하였다. 온도 10K의 PL측정에서 InGaAs 양자우물에 의한 e2-hl 및 e2-hl 전이 피크가 각각 1.322 및 1.397 eV에서 관측되었다. 온도 의존성으로부터 첫번째 가전자 띠와 두번째 가전자 띠의 에너지 차이는 약 23'meV로 나타났다. 또한 300 K에서의 PR 측정으로 e2-h2및 e2-hl 전이에 의한 피크를 관측하였고, 두번째 전도 띠의 에너지 준위에 의한 피크가 띠 채움으로 인해 첫번째 전도 띠의 에너지 준위에 의한 피크보다 상대적으로 우세하였다. 반면에 PL 측정에서는 전자 가리개 효과 때문에 첫번째 전도 띠에 의한 피크가 우세하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제29권3E호
• /
• pp.131-139
• /
• 2010

This paper proposes a novel spectral hole substitution technique for low bit-rate audio coding. The spectral holes frequently occurring in relatively weak energy bands due to zero bit quantization result in severe quality degradation, especially for harmonic signals such as speech vowels. The enhanced aacPlus (EAAC) audio codec artificially adjusts the minimum signal-to-mask ratio (SMR) to reduce the number of spectral holes, but it still produces noisy sound. The proposed method selectively predicts the spectral shapes of hole bands using either intra-band correlation, i.e. harmonically related coefficients nearby or inter-band correlation, i.e. previous frames. For the bands that have low prediction gain, only the energy term is quantized and spectral shapes are replaced by pseudo random values in the decoding stage. To minimize perceptual distortion caused by spectral mismatching, the criterion of the just noticeable level difference (JNLD) and spectral similarity between original and predicted shapes are adopted for quantizing the energy term. Simulation results show that the proposed method implemented into the EAAC baseline coder significantly improves speech quality at low bit-rates while keeping equivalent quality for mixed and music contents.