• Journal of Powder Materials
• /
• v.28 no.3
• /
• pp.259-266
• /
• 2021

The (Ga_1-xZn_x)(N_1-xO_x) solid solution is attracting extensive attention for photocatalytic water splitting and wastewater treatment owing to its narrow and controllable band gap. To optimize the photocatalytic performance of the solid solution, the key points are to decrease its band gap and recombination rate. In this study, (Ga_1-xZn_x)(N_1-xO_x) nanofibers with various Zn fractions are prepared by electrospinning followed by calcination and nitridation. The effect of the composition and crystallinity of electrospun oxide nanofibers on the morphology and optical properties of the obtained solid-solution nanofibers are systematically investigated. The results show that the final shape of the (Ga_1-xZn_x) (N_1-xO_x) material is greatly affected by the crystallinity of the oxide nanofibers before nitridation. The photocatalytic properties of (Ga_1-xZn_x)(N_1-xO_x) with different Ga:Zn atomic ratios are investigated by studying the degradation of rhodamine B under visible light irradiation.

• Korean Journal of Food Science and Technology
• /
• v.10 no.4
• /
• pp.415-422
• /
• 1978

Some minor Korean beans including red bean, mung bean and kidney bean were subjected to proximate analysis, fractionation by the solubility method and polyacrylamide gel disc electrophoresis of proteins to obtain the following results. 1) Proximate composition of the beans showed that fat content was less than 1%, carbohydrate was about 60% and protein content was in the range of $20{\sim}25%$. 2) Total globulin content of the proteins was $46{\sim}59%$, a little lower than in soybean, in the order of mung bean> kidney bean> red bean. Albumin content was comparable in kidney bean, and lower in red bean and mung bean as compared with that in soybean. Glutelin content was relatively higher, being in the range of $10{\sim}19%$ and in the order of red bean> mung bean> kidney bean. 3) According to the electrophoretic pattern, total protein fractions extracted with pH 7.6 buffer from red bean, mung bean and kidney bean showed 9.12 and 11 bands, respectively, whereas those extracted with pH 4.8 buffer showed 13, 13 and 12 bands, respectively. Water extracts of red bean, mung bean and kidney bean showed 10, 8 and 9 bands, respectively, while albumin fractions showed 8, 9 and 7 bands and globulin fractions, 4 bands in all of three beans. The band having a Rm value of $0.5{\sim}0.7$ in the globulin fraction from three beans was not observed in the water extract and appears to be specific to water insoluble globulin.

• Composites Research
• /
• v.35 no.3
• /
• pp.201-215
• /
• 2022

This paper presents the development of thin and lightweight ultra-high temperature radar-absorbing ceramic composites composed of an aluminosilicate ceramic matrix-based geopolymer reinforced ceramic fiber and sendust magnetic nanoparticles in X-band frequency range (8.2~12.4 GHz). The dielectric properties with regard to complex permittivity of ceramic/sendust-aluminosilicate composites were proportional to the size of sendust magnetic nanoparticle with high magnetic characteristic properties as flake shape and its concentrations in the target frequency range. The characteristic microstructures, element composition, phase identification, and thermal stability were examined by SEM, EDS, VSM and TGA, respectively. The fabricated total thicknesses of the proposed single slab ultra-high temperature radar absorber correspond to 1.585 mm, respectively, exhibiting their excellent EM absorption performance. The behavior of ultra-high temperature EM wave absorption properties was verified to the developed free-space measurement system linked with high temperature furnace for X-band from 25℃ to 1,000℃.

• The Plant Pathology Journal
• /
• v.24 no.4
• /
• pp.423-432
• /
• 2008

The difference of carbon source utilization and fatty acid composition between the pathotypes of Xanthomonas strains, which causing citrus bacterial canker was compared, and the physiochemical characteristics were used to analyze relationship of the strains for the first time. The pattern of several carbon sources utilization and fatty acids composition reliably discriminated the pathotypes of Xanthomonas strains. The dendrogram which was constructed by 95 carbon source utilization profiles differentiated X. axonopodis pv. citri A, $A^*$ and $A^w$ from the other pathotypes. When the dendrogram was drawn by combined analysis of carbon source utilization pattern and fatty acid composition, X. axonopodis pv. aurantifolii B, C and X. axonopodis pv. citrumelo formed a distinct cluster. The difference of carbon source utilization and fatty acid composition could be used effectively for the identification of pathotypes of citrus bacterial canker. The physiochemical characteristics strongly indicated that the strains isolated in Korea belong to X. axonopodis pv. citri A type. The cluster analysis by the band patterns of ERIC-, BOX- and REP-PCR allowed the discrimination of the pathotypes isolated from Korea. However, the rep-PCRs could not differentiate X. axonopodis pv. citri A types from $A^*$ and $A^w$ types. The overall results of metabolic profiles and rep-PCRs strongly indicated that the Korean isolates are X. axonopodis pv. citri A type.

• Korean Journal of Adult Nursing
• /
• v.23 no.4
• /
• pp.412-419
• /
• 2011

Purpose: The purpose of this study was to investigate the effects of a walking and resistance exercise on body composition and lipid profile in obese women. Methods: Fourty three women were assigned to experimental group (n=21) or control group (n=22). The walking and resistance exercise using elastic band was provided three times a week for 12 weeks. Weight, height, body mass index, body fat percentage, abdominal fatness, skeletal muscle mass, body fatness, total cholesterol, triglyceride, HDL cholesterol, and LDL cholesterol were measured before and after the program. Paired and independent t-tests were performed using SAS program. Results: Weight (t=-5.35, p<.001), body mass index (t=-4.12, p<.001), body fat percentage (t=-2.33, p =.026), and body fatness (t=-4.32, p<.001) were significantly decreased and skeletal muscle mass (t=2.09, p =.044) was significantly increased after the walking and resistance exercise. Also, total cholesterol (t=-3.03, p =.006) and LDL cholesterol (t=-2.70, p =.011) were significantly decreased and HDL cholesterol (t=2.05, p =.046) was significantly increased after the exercise program. Conclusion: According to the study result, exercise led a positive outcome on obese women in their 30~40s. The walking and resistance exercise will contribute to the improving body composition and lipid profile in this population.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.134-143
• /
• 2005

Collagen is the important structural proteins in mammals with various peptide composition and cross-linkings. The direct analysis of collagen protein was not suitable because of its structural complexity and diversity. In this study, we suggest the simple way of collagen analysis by introducing matrix-assisted laser desorption/ionization time-of flight mass spectrometry (MALDI-TOF MS) to identify the collagen and its trypsin-digested fragments, and by subsequent time-of-flight tandem mass spectrometry(Q-TOF MS/MS) to analyze the amino acid sequences of identified fragments. Using the collagen samples extracted from the tail of mouse, 10 separated bands were found in SDS-PAGE, and the masses of most bands could be more finely determined by MALDI-TOF MS. When each 10 separated proteins was tryptic digested and introduced to MALDI-TOF, the Gly1056-Arg1073 fragment from $\alpha_1$-chain was identified in four bands, and the Gly1056-Arg1073 fragment from $\alpha_2$-chain was identified in five bands, both in type I collagen. Although few fragments were found because of the cross-linkings left in digested collagen sample, it could be determined that the type I collagen existed at least in 7 separated bands. When the amino acid sequences of two identified fragments were analyzed by Q-TOF MS/MS, both sequences were identical with those determined by MALDI-TOF MS. It suggested that the two peaks in MALDI-TOF MS caused by the fragments identified in this work could be used as the fingerprint to simply identify type I collagen in protein samples.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1680-1682
• /
• 1999

In this study, three kinds of Mn-Zn ferrite/Ni-Zn ferrite/$Ni_2Y$ ferroxplana prepared by the coprecipitation method were compounded with the silicon rubber, and the ring-shaped specimens with various compositional ratio were made. The material constant of ferrite/rubber composite absorbers was obtained by the 2-port method. The material constants of the ferrite/rubber composite microwave absorber made of three kinds of ferrite with various compositional ratio were utilized in design the matching conditions (frequency and thickness) on the impedance matching map. We were able to predict the matching condition from the matching map. On all three kinds of ferrite/rubber composite microwave absorber with less than compositional ratio 60[wt.%] of ferroxplana, we have found that the reflection losses were over than 20[dB] at the S-Band $(2\sim4[GHz])$ and C-Band$(4\sim8[GHz])$.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.456-462
• /
• 2016

$NaCaGd(MoO_4)_3:Ho^{3+}/Yb^{3+}$ ternary molybdates were successfully synthesized by microwave sol-gel method for the first time. Well-crystallized particles formed after heat-treatment at $900^{\circ}C$ for 16 h showed a fine and homogeneous morphology with particle sizes of $3-5{\mu}m$. Under excitation at 980 nm, the UC intensities of the doped samples exhibited strong yellow emissions based on the combination of strong emission bands at the 520-nm and 630-nm emission bands in the green and red spectral regions, respectively. The strong 520-nm emission band in the green region corresponds to the $^5S_2/^5F_4{\rightarrow}^5I_8$ transition of $Ho^{3+}$ ions, while the strong 630-nm emission band in the red region appears to be due to the $^5F_5{\rightarrow}^5I_8$ transition of the $Ho^{3+}$ ions. The optimal $Yb^{3+}:Ho^{3+}$ ratio was found at 9:1, as indicated by the composition-dependent quenching effect of $Ho^{3+}$ ions. The pump power dependence of the upconversion emission intensity and the Commission Internationale de L'Eclairage chromaticity coordinates of the phosphors were evaluated in detail.

• Journal of Environmental Impact Assessment
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2001

Detection of red tides by satellite remote sensing can be done either by detecting enhanced level of chlorophyll pigment or by detecting changes in the spectral composition of pixels. Using chlorophyll concentration, however, is not effective currently due to the facts: 1) Chlorophyll-a is a universal pigment of phytoplankton, and 2) no accurate algorithm for chlorophyll in case 2 water is available yet. Here, red band algorithm, classification and PCA (Principal Component Analysis) techniques were applied for detecting patches of Cochlodinium polykrikoides red tides which occurred in Korean waters in 1995. This dinoflagellate species appears dark red due to the characteristic pigments absorbing lights in the blue and green wavelength most effectively. In the satellite image, the brightness of red tide pixels in all the three visible bands were low making the detection difficult. Red band algorithm is not good for detecting the red tide because of reflectance of suspended sediments. For supervised classification, selecting training area was difficult, while unsupervised classification was not effective in delineating the patches from surrounding pixels. On the other hand, PCA gave a good qualitative discrimination on the distribution compared with actual observation.

• Current Photovoltaic Research
• /
• v.3 no.2
• /
• pp.65-70
• /
• 2015

We applied KF on CIGS film to modify CIGS surface with a wider-bandgap surface layer. With the KF deposition the surface of CIGS film had fine particle on the CIGS surface at 350 and $300^{\circ}C$. No fine particle was detected at 500 and $250^{\circ}C$. With the KF treatment, the Ga and O content increased at the surface, while the In and Cu content decreased. The valence band maximum was lowered with KF treatment. The composition profile and band structure were positive side of applying KF on the CIGS surface. However, the efficiency decreased with the KF treatment due to high series resistance, probably due to too thick surface layer. A smaller amount of KF should be supplied and more systematic analysis is necessary to obtain a reproducible higher efficiency CIGS solar cells.