• Analyses & Alternatives
• /
• v.7 no.2
• /
• pp.35-77
• /
• 2023

This study aims to solve the entangled loop between demographic transition (DT) and economic growth by analyzing cross-country data. We undertake a national-level group analysis to verify the compressed transition of demographic variables over time. Assuming that the LA (latecomer advantage) on DT over time exists, we verify that the DT of the latecomer is compressed by providing a formal proof of LA on DT over income. As a DT has the double-kinked functions of income, we check them in multiple aspects: early maturation, leftward threshold, and steeper descent under a contour map and econometric methods. We find that the developing countries (the latecomer) have speedy DT (CDT, compressed DT) as well as speedy income such that DT of the latecomers starts at lower levels of income, lasts for a shorter period, and finishes at the earlier stage of economic development compared to that of developed countries (the early mover). To check the balance of DT, we classify countries into four groups of DT---balanced, slow, unilateral, and rapid transition countries. We identify that the main causes of rapid transition are due to the strong family planning programs of the government. Finally, we check the effect of latecomer's CDT on economic growth inversely: we undertake the simulation of the CDT effect on economic growth and the aging process for the latecomer. A worrying result is that the CDT of the latecomer shows a sharp upturn of the working-age population, followed by a sharp downturn in a short period. Compared to early-mover countries, the latecomer countries cannot buy more time to accommodate the workable population for the period of demographic bonus and prepare their aging societies for demographic onus. Thus, we conclude that CDT is not necessarily advantageous to developing countries. These outcomes of the latecomer's CDT can be re-interpreted as follows. Developing countries need power sources to pump up economic development, such as the following production factors: labor, physical and financial capital, and economic systems. As for labor, the properties of early maturation and leftward thresholds on DTs of the latecomer mean that demographic movement occurs at an unusually early stage of economic development; this is similar to a plane that leaks fuel before or just before take-off, with the result that it no longer flies higher or farther. What is worse, the property of steeper descent represents the falling speed of a plane so that it cannot be sustained at higher levels, and then plummets to all-time lows.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.1
• /
• pp.17-36
• /
• 1984

Since 1973, the competition on the development of fuel saving type internal combustion engines has become severe by the two times oil shock, and new type engines are reported every several months. Whenever these new type engines are developed, new designs are required and they will be offered in the market after performing the endurance test for a long time. But the engine market is faced with a heavy burden of finance, as the developing of a new engine requires tremendous expenses. For this reason, the computer simulation method has been lately developed to cope with it. The computer simulation method can be available to perform the reasonable research works by the theoretical analysis before carrying out practical experiments. With these processes, the developing expenses are cut down and the period of development is curtailed. The object of this study is the development of simulation computer program for the small naturally aspirated four-stroke diesel engine which is intended to product by the original design of our country. The process of simulation is firstly investigated for the ideal engine cycle, and secondly for the real engine cycle. In the ideal engine cycle, each step of the cycle is simulated by the energy balance according to the first law of thermodynamics, and then the engine performance is calculated. In the real cycle imulation program, the injection rate, the preparation rate and the combustion rate of fuel and the heat transfer through the wall of combustion chamber are considered. In this case, the injection rate is supposed as constant through the crank angle interval of injection and the combustion rate is calculated by the Whitehouse-Way equation and the heat transfer is calculated by the Annand's equation. The simulated values are compared with measured values of the YANMAR NS90(C) engine and Mitsubishi 4D30 engine, and the following conclusions are drawn. 1. The heat loss by the exhaust gas is well agree with each other in the lower load, but the measured value is greater than the calculated value in the higher load. The maximum error rate is about 15% in the full load. 2. The calculated quantity of heat transfer to the cooling water is greater than the measured value. The maximum error rate is about 11.8%. 3. The mean effective pressure, the fuel consumption, the power and the torque are well agree with each other. The maximum error is occurred in the fuel consumption, and its error rate is about 7%. From the above remarks, it may be concluded that the prediction of the engine performance is possibly by using the developed program, although the program needs to reform by adding the simulation of intake and exhaust process and assumping more reliable mechanical efficiency, volumetric efficiency, preparation rate and combustion rate.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.9-18
• /
• 2006

In the digital camera system, CMOS image sensor (CIS) is widely used because its size and weight become smaller and power consumption becomes lower. However, there are common problems that colors of the recorded image do not match those of the photographed object and that spectral sensitivity of the CIS used in different cameras varies largely in each case. Therefore, color correction is needed because the spectral sensitivity of the CIS in each color is neither the same color component for most standard colors nor the appropriate color representation for any output devices. In the conventional method, a color correction is empirically obtained by a large number of iterative experiments, but the result is not so satisfied. In this paper, a new method to obtain the efficient color correction matrix for digital camera using CIS is proposed. We obtain camera transfer matrix under the certain white-balance point, and color correction matrix that makes the transfer characteristic of digital camera close to the transfer characteristic of ideal camera is obtained. The experimental results show that the transfer characteristic of digital camera by the proposed method is close to that of the ideal camera. In addition, the image quality of pictures of digital camera using the proposed method is dramatically improved.

• 한국노년학
• /
• v.29 no.1
• /
• pp.135-147
• /
• 2009

Recently, The number of hypertension is increasing with westernized diet and lack of exercise. Many researchers are trying to treat and prevent hypertension by exercise therapy. However, not only did most of studies analyze the effect and usefulness of exercise related to lowering hypertension, but also there is no analysis of the difference of fitness with regard to hypertension according to ages. It is assumed to be important research work to be continued to identify, from the public health's point of view, the difference of fitness with regard to hypertension according to ages can be a essential data for treating and preventing hypertension. Thus, this study is to identify the difference of fitness according to hypertension of adult female over 20s and emphasize the importance of fitness level to the hypertension. Also, this study is to devise valuable study by examining the difference of cardiovascular function. Subjects were 8889 of adult female over 20s. Subjects visited promotion of health center at Y Gu public health center and took comprehensive medical test including hypertension test in Seoul in Korea. It was divided into normal, prehypertension, stage I hypertension and stage II hypertension group by JNC7. The evaluation of cardiorespiratory function was by resting heart rate and lung capacity, the evaluation of fitness was by cardiorespiratory endurance, muscular endurance, muscular strength, power, agility, balance, and flexibility, and the difference of fitness was analyzed by ANCOVA revising independent variable of BMI, drinking, and smoking which affects hypertension. At result, there was significant difference between normal and hypertension group according to most ages in two variable of all cardiorespiratory function, seven fitness variable. Through this study, it was defined that hypertension group had lower cardiorespiratory function and fitness than normal group.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.811-820
• /
• 2006

Ultra wideband CPW batons are proposed in this paper. The proposed talons are consisted of ultra wideband multi-stage Wilkinson dividers and 'X'-shaped $180^{\circ}$ out-of-phase generator. Bottom-bridges and via-holes are used to connect CPW ground lines instead of the conventional air-bridges which require troublesome manual working in fabrication with HMIC(Hybrid Microwave Integrated Circuits) substrates. The proposed CPW batons have ultra wideband of 3 or $10(=F_{figh}/F_{low})$ theoretically, the wideband characteristics and S-parameters of the basis Wilkinson divider are directly converted to those of the proposed batons. The proposed batons are so compact and small compared to the conventional Wilkinson batons because no additional area for out-of-phase section is required. So the size of the proposed batons is exactly the same as that of the basis Wilkinson dividers. As examples, 3-stage and 7-stage wideband Wilkinson dividers are converted to the proposed batons. Their measured operating bandwidth are $1\sim3GHz$ and $0.8\sim5GHz$, respectively, with excellent matching, isolation and power division performances. The measured magnitude and phase balance errors are ${\pm}0.5dB\;and\;0.45\;dB,\;and\;{\pm}5^{\circ}\;and\;{\pm}10^{\circ}C$ over $1\sim3GHz\;and\;0.8\sim5GHz$, respectively.

• Strategy21
• /
• s.42
• /
• pp.53-82
• /
• 2017

Samuel Eliot Morison (1887-1976) was one of the pre-eminent historians of his generation. He was not only a famous historian at that time, but also was promoted to the rank of Admiral in U.S. Navy Reserve. Fifteen volume History of United States Naval Operations in World War II was published between 1947 and 1962, was not only a comprehensive report on the Navy's projection of power over two oceans, but a classic of historical literature that stands as the definitive treatment of it subject. Although he was fifty-five when war come to America in December 1941. Samuel Eliot Morison was determined to play a role. A professor at Harvard at the time, he joined volunteering for duty in the Navy. An experienced sailor, Professor Morison had earlier sailed that same routes taken by Christopher Columbus while researching his biography, Admiral of the Ocean Sea, which appeared in January 1942 th much acclaim and later got a Pulitzer Prize. Thus Morison plunged into the war, crossing the Atlantic aboard a destroyer. He assumed himself as "Parkman on the sea", tried to follow Parkman's historiographic method, not only participatory history but also literary style. And during writing History of United States Naval Operations in World War II, He emphasized two principles, publicity and objectivity. In terms of publicity, he always worried about who read history and why. In his pamphlet, "History as a Literary Art", he asserted it is useless if readers do not read a history which historians wrote. So he thought historians have forgotten that there is an art of writing of history. Therefore, he built his narratives around brightly rendered visuals and used the present tense to describe actions he witnessed firsthand, he wrote of the U.S. combat in very vividly. But strongly driven by publicity, he sometimes lost his balance in writing the naval history. For instance, the naval history became the focus of criticism for its prejudiced comments about the commanders. Also some reviewers asserted he did not secure the objectivity on writing the naval history. Although he sometimes deliberately torpedoed the objectivity of his work for strengthening publicity, by writing an extensive U.S. naval history, he introduced maritime history and naval history to the public widely. Until in early twentieth century, U.S. historians usually had been focusing their effort to the traditional areas, for example politic, economy, and etc. His intensive effort on the operations of U.S. Navy in World War II aroused a public interest in maritime and naval history. In conclusion, through using literary style and realistic narratives, historian Morison wrote a naval history for all the people which could appealed to the public.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.29-38
• /
• 2012

The noise generated in the process of obtaining the medical image acts as the element obstructing the image interpretation and diagnosis. To restore the true image from the image polluted from the noise, the total variation optimization algorithm was proposed by the R.O. F (L.Rudin, S Osher, E. Fatemi). This method removes the noise by fitting the balance of the regularity and fidelity. However, the blurring phenomenon of the border area generated in the process of performing the iterative operation cannot be avoided. In this paper, we propose the adaptive total variation method by mapping the control parameter to the proposed transfer function for minimizing boundary error. The proposed transfer function is determined by the noise variance and the local property of the image. The proposed method was applied to 464 tooth images. To evaluate proposed method performance, PSNR which is a indicator of signal and noise's signal power ratio was used. The experimental results show that the proposed method has better performance than other methods.

• Analyses & Alternatives
• /
• v.7 no.1
• /
• pp.83-114
• /
• 2023

Previous studies on international politics dealing with World War I mainly pointed to the balance of power and alliance issues as the causes of war. This view saw the assassination of Sarajevo, the direct cause of the war, as a simple opportunity. As a result, these studies can explain 'what made war inevitable' but still need to fully explain 'why the war started in the Balkans and how it spread throughout Europe.' To compensate for the limitations of these preceding studies, this study aim to find the origin of World War 1 in the context of the Balkan, which began with the conflict between Germany-Austria and Russia-Serbia. To this end, this study analyzed the historical background of the Balkan crisis and the development of the crisis through the concept of Shoemaker and Spanier's patron-client relationship between states and crisis manipulation. As a result, it confirmed that competition between Russia and Germany and crisis manipulation attempts by their client states did not necessarily lead to war. But crisis manipulation has instilled a competitive mindset in patron states that will potentially and cumulatively work. Since then, unexpected crises have occurred, and rival patrons have suspected that their opponents are planning grand strategic conspiracies and challenges. As a result, they have become vulnerable to crisis manipulation by the clients. This situation was the cause of the outbreak of World War I in the context of the Balkans' patron-client relationship.

• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.465-474
• /
• 2014

This research aimed to enhance the effects of training through the use of infrared cameras located at anterior and posterior positions. The results were as follows. In the case of the smash, the impact time needed to be adjusted to raise their impact point. The smash of S1, on the other hand, was a step smash, which showed the fastest racquet head speed and the greatest transmission of power upon impact. As the max racquet speed upon impact and during speed was similar, S1 showed the best impact time. All athletes except S6 were shown to use their right foot as their 1 step that was located in front upon landing, using a hop step as their first step. For the best swing upon stroke, it is important to make the best conditions possible for the use of elbow joints and wrist joints. The rotating radius of the racquet should be big and the shuttlecock should be fast. Balance is important in footwork, or the coordinated movement of the feet. Without a correct step it is difficult to execute an efficient stroke. In an actual game, steps need to be executed in 2 to 4 steps, and programs focusing on steps according to situation, agility and reaction need to be executed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.255-256
• /
• 2006

In this paper, we investigated the. characteristics of fault current limiting according to fault angle in the integrated three-phase flux-lock type SFCL in fault types such as the single-line-to-ground fault, the double-line-to-ground fault and the three-line-to-ground fault. When the SFCL is operating under normal condition, the magnetic flux generated between primary and secondary coils of each single phase is canceled out perfectly, so that the impedance of the SFCL is also not generated and the power system can be operated normally without any loss, However, if a fault occurs even in any phase out of three phases, quench happened in SFCL elements and the current flowing secondary coil is restricted abruptly. Finally, the balance of magnetic flux in whole SFCL system is destroyed, and the fault currents in every phase could be limited at the same time irrespective of the fault types. As a result, the developed SFCL in this study were operated normally as expected and the purpose of the integration of 3 phase current limiting was also achieved successfully. However, the fault current limiting characteristics of the SFCL was dependant on the quench characteristics of HTSC elements in each phase, and it was expected that the improvement of the SFCL could be possible through the introduction of HTSC elements which have better critical characteristics.