• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.2
• /
• pp.1-8
• /
• 2000

Manual material handling(MMH)is major factor which causing physical injuries of worker at working area and frequency of low back pain(LBP) is increasing industrial accidents. Especially, working in bad circumstance such as farm, orchard, harbor loading and unloading, logging place and mining place which located in inclined slope can cause much possibility of hazard and absence of working balance can cause injuries of musculoskeletal system such as joint, bone, ligament. So, this study used EMG system to measure and evaluate muscle force information and fatigue of worker when lifting on slope. The result of measuring averaged integrated EMG(AEMG) shows multifidus muscle be used more than anything else in force. neck extensors are used at 15°, 20°frequently. generally the AEMG result shows multifidus muscle be used in force. Commonly, muscle fatigue of multifidus is higher than other muscle by analysis mean power frequency(MPF). The result of load sharing rate shows multifidus and erectorspinae which are deep spinal muscles is relatively high and neck extensor is low.

• The Korean Journal of Physiology and Pharmacology
• /
• v.28 no.3
• /
• pp.253-264
• /
• 2024

Chronic neuropathic pain (CNP) is a complex condition often arising from neural maladaptation after nerve injury. Understanding CNP complications involves the intricate interplay between brain-heart dynamics, assessed through quantitative electroencephalogram (qEEG) and heart rate variability (HRV). However, insights into their interaction in chronic pain are limited. Resting EEG and simultaneous electrocardiogram (lead II) of the participants were recorded for qEEG and HRV analysis. Correlations between HRV and qEEG parameters were calculated and compared with age, sex, and body mass index (BMI)-matched controls. CNP patients showed reduced HRV and significant increases in qEEG power spectral densities within delta, theta, and beta frequency ranges. A positive correlation was found between low frequency/high frequency (LF/HF) ratio in HRV analysis and theta, alpha, and beta frequency bands in qEEG among CNP patients. However, no significant correlation was observed between parasympathetic indices and theta, beta bands in qEEG within CNP group, unlike age, sex, and BMI-matched healthy controls. CNP patients display significant HRV reductions and distinctive qEEG patterns. While healthy controls exhibit significant correlations between parasympathetic HRV parameters and qEEG spectral densities, these relationships are diminished or absent in CNP individuals. LF/HF ratio, reflecting sympathovagal balance, correlates significantly with qEEG frequency bands (theta, alpha, beta), illuminating autonomic dysregulation in CNP. These findings emphasize the intricate brain-heart interplay in chronic pain, warranting further exploration.

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.275-294
• /
• 2016

A primary task in wireless sensor networks (WSNs) is data collection. The main objective of this task is to collect sensor readings from sensor fields at predetermined sinks using routing protocols without conducting network processing at intermediate nodes, which have been proved as being inefficient in many research studies using a static sink. The major drawback is that sensor nodes near a data sink are prone to dissipate more energy power than those far away due to their role as relay nodes. Recently, novel WSN architectures based on mobile sinks and mobile relay nodes, which are able to move inside the region of a deployed WSN, which has been developed in most research works related to mobile WSN mainly exploit mobility to reduce and balance energy consumption to enhance communication reliability among sensor nodes. Our main purpose in this paper is to propose a solution to the problem of deploying mobile data collectors for alleviating the high traffic load and resulting bottleneck in a sink's vicinity, which are caused by static approaches. For this reason, several WSNs based on mobile elements have been proposed. We studied two key issues in WSN mobility: the impact of the mobile element (sink or relay nodes) and the impact of the mobility model on WSN based on its performance expressed in terms of energy efficiency and reliability. We conducted an extensive set of simulation experiments. The results obtained reveal that the collection approach based on relay nodes and the mobility model based on stochastic perform better.

• Nuclear Engineering and Technology
• /
• v.52 no.3
• /
• pp.508-519
• /
• 2020

During transients or accidents, the reactor core is uncovered, and droplets entrained above the quench front collides with the uncovered fuel rod surface. Droplet impact cooling can reduce the peak cladding temperature. Besides zirconium-based cladding, versatile accidental tolerant fuel (ATF) claddings, including FeCrAl, have been proposed to increase the accident coping time. In order to investigate the effect of surface properties on droplet impact cooling of cladding surfaces, the droplet impact phenomena are photographed on the FeCrAl and zircaloy-4 (Zr-4) surfaces under different conditions. On the oxidized FeCrAl surface, the Leidenfrost phenomenon is not observed even when the surface temperature is as high as 550 ℃ with We > 30. Comparison of the impact behaviors observed on different materials shows that nucleate and transition boiling is more intensive on surfaces with larger thermal conductivity. The Leidenfrost point temperature (LPT) decreases with the solid thermal effusivity (${\sqrt{k{\rho}C_p}}$). However, the CHF temperature is relatively insensitive to the surface oxidation and Weber number. Droplet spreading diameter is analyzed quantitatively in the film boiling stage. Based on the energy balance a correlation is proposed for droplet maximum spreading factor. A mechanistic model is also developed for the LPT based on homogeneous nucleation theory.

• Structural Engineering and Mechanics
• /
• v.44 no.4
• /
• pp.431-448
• /
• 2012

In this paper, the first-order shear deformation theory (FSDT) (Mindlin) for continuum incorporating surface energy is exploited to study the static behavior of ultra-thin functionally graded (FG) plates. The size-dependent mechanical response is very important while the plate thickness reduces to micro/nano scales. Bulk stresses on the surfaces are required to satisfy the surface balance conditions involving surface stresses. Unlike the classical continuum plate models, the bulk transverse normal stress is preserved here. By incorporating the surface energies into the principle of minimum potential energy, a series of continuum governing differential equations which include intrinsic length scales are derived. The modifications over the classical continuum stiffness are also obtained. To illustrate the application of the theory, simply supported micro/nano scaled rectangular films subjected to a transverse mechanical load are investigated. Numerical examples are presented to present the effects of surface energies on the behavior of functionally graded (FG) film, whose effective elastic moduli of its bulk material are represented by the simple power law. The proposed model is then used for a comparison between the continuum analysis of FG ultra-thin plates with and without incorporating surface effects. Also, the transverse shear strain effect is studied by a comparison between the FG plate behavior based on Kirchhoff and Mindlin assumptions. In our analysis the residual surface tension under unstrained conditions and the surface Lame constants are expected to be the same for the upper and lower surfaces of the FG plate. The proposed model is verified by previous work.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.889-896
• /
• 2022

Data required in a wireless sensor network environment requires more accurate figures as technology advances and its complexity increases. However, in the case of operating a large number of sensor nodes in a large area, the balance between the power consumed and the data quality that can be acquired accordingly should be considered for that purpose. In particular, in complex, densely populated urban areas or military operations with specific goals, location data requires increasingly detailed and high accuracy over a wide range. In this paper, we propose a method of mounting a Global Positioning System(: GPS) only on some of the sensor nodes deployed in the wireless sensor network and improving the error of GPS location data measured on that sensor node through Angle of Arrival(: AoA) and Received Signal Strength Indicator(: RSSI).

• Women's Health Nursing
• /
• v.28 no.1
• /
• pp.18-26
• /
• 2022

Purpose: This study investigated whether parenting stress, work-family conflict, resilience affect retention intent in Korean nurses returning to work after parental leave. Methods: The participants in this study were 111 nurses recruited from 10 hospitals in Korea, who were working after formal parental leave from their hospitals. Collected data were analyzed using descriptive statistics, the t-test, analysis of variance, the Mann-Whitney U-test, Pearson correlation coefficients, and hierarchical regression. Results: Retention intention (33.80±7.78), parenting stress (101.70±17.57), and resilience (85.02±12.75) were at greater than moderate levels and a midpoint level of work-family conflict (29.63±7.00) was noted in this sample of mostly women nurses in their 30s. The factors affecting retention intent were parental leave duration, the number of times that participants had taken parental leave, health condition, work-family conflict, and resilience. The total explanatory power of these variables was 36.7%. Retention intent had a negative correlation with parenting stress and work-family conflict. Conversely, retention intent was positively correlated with resilience. Conclusion: This study supports the need for flexible adjustment of returning nurses' working hours and family-friendly policies to promote balance between work and family. It is also necessary to develop and apply measures that boost resilience and support health improvement for nurses returning to work.As nurses are often assigned to new areas of work upon return, training programs to aid their adjustment may also be helpful.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.107-116
• /
• 2012

In this study, the trucks(2.9-liter) have been developed to use DME as fuel, and performance test of the vehicle's DME engine, power, emissions, fuel economy and vehicle aspects was conducted. For experiments, the fuel system(common-rail injectors and high-pressure pump included) and the engine control logic was developed, and ECU mapping was performed. As a result, the rail pressure from 40MPa to approximately 65% increase compared to the base injector has been confirmed that. Also, the pump discharge flow is 15.5 kg/h when the fuel rail pressure is 400rpm(40MPa), and the pump discharge flow is 92.1 kg/h when the fuel rail pressure is 2,000rpm(40MPa). The maximum value of full-load torque capability is 25.5 kgfm(based on 2,000 rpm), and more than 90% compared to the level of the diesel engine were obtained. The DME vehicle was developed in this study, 120 km/h can drive to the stable, and calculated in accordance with the carbon-balance method of fuel consumptions is 5.7 km/L.

• Journal of Korean Public Health Nursing
• /
• v.28 no.1
• /
• pp.138-148
• /
• 2014

Purpose: This study was conducted in order to determine the effects of a health promotion program on perception of health behavior, physical fitness, and body composition in child care helpers. Methods: The study had a one group pretest-posttest quasi-experimental design. Data were collected from 38 child care helpers from July 6 to November 9, 2013. The health promotion program consisted of health education, self-exercise, encouragement, and identification. The following data were collected perception(perceived benefit, barrier, and self-efficacy), physical fitness(balance, grasp power, and flexibility), and body composition(body mass index, body fat ratio, waist circumference, and basal metabolic rate) and analysis was performed using on SPSS WIN 18.0. Results: Self-efficacy showed a significant increased. Body mass index, body fat ratio, and waist circumference showed a significant decreased. No significant difference in perceived benefit, barrier, physical fitness, and basal metabolic rate was observed between pre-test and post-test. Conclusion: This health promotion program had an effect on self-efficacy and body composition in child care helpers. Therefore, this health promotion program for child care helpers can be recommended as an effective nursing intervention.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.93-96
• /
• 2011

A genetic algorithm (GA) has been employed to optimize the major design variables of the liquid rocket engine. Mass flow rate to the main thrust chamber, mass flow rate to the gas generator and chamber pressure have been selected as design variables. The target engine is the open gas generator cycle using the LO2/RP-1 propellant. The objective function of design optimization is to maximize the specific impulse with condition of energy balance between the pump and the turbine. The properties of the combustion chamber have been obtained from CEA2. Pump & turbine efficiencies and properties of the gas generator have been modeled mathematically from reference data. The result shows 3~4% errors for the specific impulse and 2~6% errors for the pump power of the gas generator cycle compared to references.