• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.5 no.1
• /
• pp.46-52
• /
• 2002

A robust nonlinear observer, utilizing the sliding mode concept, is developed for the dynamic positioning of ships. The observer provides the estimates of linear velocities of the ship and bias from slowly varying environmental loads. It also filters out wave frequency motion to avoid wear of actuators and excessive fuel consumption. The main advantage of the proposed observer is in its robustness. Especially, the observer structure with a saturation function makes the proposed observer robust against neglected nonlinearties, disturbances and uncertainties. Since the mathematical model of DP ships is difficult to obtain and includes uncertainties and disturbances, it is very important for the observer to be robust. A nonlinear output feedback controller is derives based on the developed observer using the observer backstepping technique, and the global stability of the observer and control law is shown by Lyapunov stability theory.. A set of simulation was carried out to investigate the performance of the proposed observer for dynamic positioning of ships.

• Proceedings of the KIEE Conference
• /
• 2007.04b
• /
• pp.134-137
• /
• 2007

LMTT(Linear Motor-based Transfer Technology) 시스템은 항만 컨테이너 이송장치의 자동화 시템으로 기술적 포화상태에 이른 AGV (Automated Guided Vehicle)의 대체 수단으로 제안되었다. 본 논문에서는 PMLSM (Permanent Magnetic Linear Synchronous Motor)을 기본 구조로 한 LMTT에서 발생할 수 있는 레일과 차체간의 인척력 변화와 다양한 부하 중량에 대한 시스템 내부 변수의 변동에 적응할 수 있는 제어기 설계에 초점을 두었다. 그렇게 됨으로써 제어시 큰 방해요소로 작용하는 마찰력에 의한 백래쉬 및 데드존을 최소화하여 속응성 및 정밀도를 향상시키고자 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.643-650
• /
• 2017

The control of flexible joint robot is getting more attentions because its applications are more frequently used for robot systems in these days. This paper proposes a robust impedance controller for the flexible joint robot by using integral sliding mode control and backstepping control. The sliding mode control decouple disturbances completely but requires matching condition for disturbances. The dynamic model of flexible joint robot is divided into motor side and link side and the disturbance of the link side does not satisfy matching condition and cannot be decoupled directly by the actual input in the motor side. To overcome this difficulty, backstepping control technique is used with sliding mode control. The mismatched disturbance in the link side is changed into matched one in the respect to virtual control input which is the state controlled by actual input in the motor side. Integral sliding mode control is used to preserve the impedance control performance and the improved robustness at the same time.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.223-233
• /
• 2008

A new output feedback controller design approach for flexible-joint (FJ) robots via the observer dynamic surface design technique is presented. The proposed approach only requires the feedback of position states. We first design an observer to estimate the link and actuator velocity information. Then, the link position tracking controller using the observer dynamic surface design procedure is developed. Therefore, the proposed controller can be simpler than the observer backstepping controller. From the Lyapunov stability analysis, it is shown that all signals in a closed-loop system are uniformly ultimately bounded. Finally, the simulation results of a three-link FJ robot are presented to validate the good position tracking performance of the proposed control system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.856-861
• /
• 2011

The mobile robot controller is designed to track the target and to maintain the formation at the same time. Formation control is included in mobile robot controller by extending the trajectory tracking algorithm. The dynamic model of mobile robot is used with kinematic model considering the practical physical parameters of mobile robot. The dynamic model of mobile robot transforms velocity control input of kinematic model into torque control input which is the practical control input of mobile robot. Formation controller of mobile robot is designed to satisfy Lyapunov stability by backstepping method. The designed formation controller is applied to the mobile robot for various target movements and simulated to confirm the Lyapunov stability.

• Journal of Institute of Convergence Technology
• /
• v.5 no.2
• /
• pp.13-19
• /
• 2015

Recently, quadcopters have been popular as aerial drones. The structure of quadcopters is simpler than traditional helicopters and they are easy to construct and maneuver. Various hardware platforms for quadcopters have been developed. However, the controller design is not easy due to the requirement of 6-DOF flights using 4 rotors(control inputs)(under-actuated systems). In order to overcome the underactuation problem, various control methods - PID, LQR, $H_{\infty}$, SMC, backstepping control, and etc. - have been suggested for the control of quadcopters. In this paper, dynamic features and control methods of quadcopters are reviewed and evaluated. Future works are proposed for designing the advanced controllers of quadcopters.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.spc2
• /
• pp.308-314
• /
• 2005

Transient stabilization with voltage regulation is investigated for a synchronous generator when the mechanical power is perturbed to any unknown value within its physical bounds so that the operating point of the system shifts to an unknown point. An adaptive excitation controller is designed based on the backstepping method with tuning functions. It will be shown that the adaptive control law proposed can achieve the convergence of the system states to the new equilibrium point in correspondence with the real value of the unknown mechanical power and the regulation of the terminal voltage to the required value. Simulation results are given to demonstrate the effectiveness of the proposed controller for the transient stabilization and voltage regulation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.2
• /
• pp.69-78
• /
• 2009

Localization is a very important technique for the mobile robot to navigate in outdoor environment. In this paper, the development of the sensor fusion algorithm for controlling mobile robots in outdoor environments is presented. The multi-sensorial dead-reckoning subsystem is established based on the optimal filtering by first fusing a heading angle reading data from a magnetic compass, a rate-gyro, and two encoders mounted on the robot wheels, thereby computing the dead-reckoned location. These data and the position data provided by a global sensing system are fused together by means of an extended Kalman filter. The proposed algorithm is proved by simulation studies of controlling a mobile robot controlled by a backstepping controller and a cascaded controller. Performances of each controller are compared.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.239-244
• /
• 2010

This paper is to present map building of mobile robot using RFID (Radio Frequency Identification) technology and ultrasonic sensor. For mobile robot to perform map building, the mobile robot needs its localization and accurate driving in space. In this reason, firstly, kinematic modeling of mobile robot under non-holonomic constrains is introduced. Secondly, based on this modeling, a tracking controller is designed for tracking a given path based on backstepping method using Lyapunov function. The Lyapunov function is also introduced for proving the stability of the designed tracking controller. Thirdly, 2D map building is performed by RFID system, mobile robot system and ultrasonic sensors. The RFID mobile robot system is composed of DC motor, encoder, ultra sonic sensor, digital compass, RFID receiver and RFID antenna. Finally, the path tracking simulation results and map building experimental results are presented to show the effectiveness of the designed controller.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.1-10
• /
• 2021

The electro-hydrostatic actuators (EHA) are widely used in various industrial fields since they can independently execute the function of the hydraulic power source and have high efficiency. Particularly, in the aviation field, the EHA is mainly designed as dual redundant asymmetric tandem actuator to mitigate failure and minimize installation space. However, aviation EHAs designed in the form of dual redundant asymmetric tandem actuator have the disadvantage of decreased durability performance due to the occurrence of force fighting. In this paper, the controller is designed based on backstepping technique to improve control performance and reduce force fighting for aviation EHA. The augmented state observer is proposed to estimate the states required for control. Through simulation, it was verified that the proposed controller had superior control performance and significantly reduces the force fighting compared to the general PI controller.