• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.147-150
• /
• 2002

A light guide panel is an element of the LCD backlight module that is often used for the display of compact electronic devices. In this study, a laser marking system is proposed to fabricate light guide panel, which can be replaced of other manufacturing methods such as silk printing, stamping, and v-cutting methods. The objectives of this research are the establishment of laser marking system, evaluation of laser marking parameters, understanding marking process, application to PMMA, reliability test and quality inspection. A 50W $CO_2$ laser (CW) was used to perform different experiments in which, the influence of some processing parameters (average power, scanning speed) on the geometry and quality of groove pattern was studied. The width of the etched grooves increases with increasing a laser power and decreasing a scan speed. In order to analyze surface characteristics and optical properties (luminance, uniformity), SEM photography and BM7 (luminance measuring system) were used. As a result, the optimal conditions of the process parameters were determined.

• Journal of Information Display
• /
• v.11 no.2
• /
• pp.76-83
• /
• 2010

This paper presents the multi-user autostereoscopic 3D display system constructed and operated by the authors using the time-multiplexing approach. This prototype has three main advantages over the previous versions developed by the authors: its hardware was simplified as only one optical array is used to create viewing regions in space, a lenticular multiplexing screen is not necessary as images can be produced sequentially on a fast 120Hz LCD with full resolution, and the holographic projector was replaced with a high-frame-rate digital micromirror device (DMD) projector. The whole system in this prototype consists of four major parts: a 120Hz high-frame-rate DMD projector, a 49-element optical array, a 120Hz screen assembly, and a multi-user head tracker. The display images for the left/right eyes are produced alternatively on a 120Hz direct-view LCD and are synchronized with the output of the projector, which acts as a backlight of the LCD. The novel steering optics controlled by the multiuser head tracker system directs the projector output to regions referred to as exit pupils, which are located in the viewers’eyes. The display can be developed in the "hang-on-the-wall"form.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.129-137
• /
• 2010

There are a lot of multimedia functions getting included in mobile devices recently, not only simple audio but visual functions as well, such as video playing, game and web browsing. Such the visual multimedia functions brought the strong requirement for much bigger LCD Display and high resolution. And the brightness of LCD is also one of major requirements and it is required to be more bright. However, LCD brightness is limited to increase because of power consumption. It occupies nearly 30% of the whole system power. This thesis suggests an effective and simple method of adjusting the LCD backlight brightness, considering a characteristic of battery and user pattern.

• Laser Solutions
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2008

We proposed new light guide panel (LGP) fabrication method exploiting laser-processed inner scatterers and surface pattern. The proposed method has achieved LGP performance improvement in both brightness and uniformity. The inner scatterers and surface pattern of grid type were fabricated with a 2nd harmonic Nd:YAG pulse laser engraving system and a $CO_2$ laser scanning system, respectively. In the implementation of LGP, inner scatterers was arranged in accordance with linear or curved pattern with changing density and surface pattern was engraved on the surface of an inner-scatterers embedded LGP. The increase of scatterers' density and the use of surface patterns in both linear and curved pattern provided high luminance and uniformity enhancement. While thecurved pattern incorporated with increased scatterers' density and surface patterns yielded brightness improvement with preserving good uniformity, the linear pattern showed highly localized brightness near the light entrance of the LGP. We can also observe that the uniformity was mainly determined by pattern of inner scatterers, and the brightness was improved by the higher density and the utilization of surface patterns. From the results, the use of laser-processed inner and surface patterns can be a potential alternative for efficient and simple LGP fabrication method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.12
• /
• pp.1002-1010
• /
• 2016

This paper describes the design of a cellphone curved glass measuring device using by camera. The measuring device was composed of two camera, two backlight system, a body and so on, and the program was made for a camera calibration and noise removal, and also the program was made for height measurement of a cellphone curved glass using by subpixel algorism. And then a new technique for measuring the height of the cell phone curved glass was proposed. The characteristics test of height measurement of gage blocks and cell phone curved glasses was carried out, the error of the height measurement of gage block is less than ${\pm}0.005$ and the error of the height measurement of the cell phone curved glasses is less than ${\pm}0.005$. Thus it thought that the designed cellphone curved glass measuring device and the new technique for measuring the height was used to measure the height of the cellphone curved glass.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.451-454
• /
• 2009

There are a lot of multimedia functions getting included in mobile devices recently, not only simple audio but visual functions as well, such as video playing, game and web browsing. Such the visual multimedia functions brought the strong requirement for much bigger LCD Display and high resolution. And the brightness of LCD is also one of major requirements and it is required to be more bright However, LCD brightness is limited to increase because of power consumption. It occupies nearly 30% of the whole system power. This thesis suggests an effective and simple method of adjusting the LCD backlight brightness, considering a characteristic of battery and user pattern.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.326-331
• /
• 2010

This paper has proposed and experimentally demonstrated a new BLU using an LED and an acryl, which is specially focused on the implementation about the guiding effect of an acryl luminous by the LED. While the conventional BLU using a fluorescent lamp is generally and widely used, it shows big power consumption with a short life even more too thick to hold on the wall. To solve such demerits, we propose a new method for a BLU using an LED and an acryl in this paper. This BLU system has various scratches on the surface of acryl to get diffusion effect of light, and has been included an embedded board that can dynamically control the colors and the intensity of the BLU through the Internet. We have conducted computer simulations to find out the optimal scratch pattern on the surface of the acryl for the backlight system. Based on the resulted out simulation. The the optimal scratch pattern signs has been developed. The simulation result shows 2,673Lux an average for a luminous intensity test, and the other hand, experiential result shows 2,554Lux. From the experiments, it is possible for the proposed BLU system to be used for real advertisements.

• The KIPS Transactions:PartB
• /
• v.17B no.6
• /
• pp.445-458
• /
• 2010

A Cold Cathode Fluorescent Lamp(CCFL) is used as a LCD Monitor's backlight widely. The most common way to check CCFL's defects is an examination with the naked eye. This naked eye examination can cause examination inconsistencies and industrial disasters. A shooting environment and detection algorithms are important for finding CCFL defects automatically. This paper presents CCFL defect detection algorithms using images captured under the shooting environment with sidelight which is one of the shooting environment we have suggested. The experimental result shows 4.65% of overdetection and 5.37% of unsuccessful defect detection of CCFL.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.117-119
• /
• 2007

본 논문에서는 램프가 한개 이상 개방 시 피드백 제어 회로를 동작하지 않도록 하면서, 램프를 보호할 수 있는 개방전압을 출력하는 LCD 백라이트 구동용 인버터 회로도에 관한 것이다. 램프 개방전압 출력을 위한 회로는 램프 전류 피드백 블록, 개방전압시 이상신호를 감지하는 전압 피드백 블록, 램프 개수에 상관없이 최고치 값을 감지하는 블록으로 되어 있다. 전술한 회로가 내장된 인버터는 램프의 개방 시 램프의 개수 상관없이 CCFL의 보호 스펙인 2500V의 개방전압을 출력한다. 이러한 인버터가 내장된 LCD패널은 향상된 안정화 동작을 구현하게 된다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.69-81
• /
• 2010

A Cold Cathode Fluorescent Lamp(CCFL) is used as a LCD Monitor's backlight widely. The most common way to check CCFL's defects is an examination with the naked eye. This naked eye examination can cause an examination inconsistency and an industrial disaster. To examine CCFL defects, a shooting equipment and a defect detection algorithm are necessary. This paper shows the shooting environments for checking CCFL and presents some CCFL defect detection algorithms. As a result of experiments, our implementations showed 98.32% of successful defect detection of CCFL.