• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.18-24
• /
• 2012

High current behaviors of the extended drain n-type metal-oxide-semiconductor field effects transistor (EDNMOSFET) for electrostatic discharge (ESD) protection of high voltage operating LDI (LCD Driver IC) chip are analyzed. Both the transmission line pulse (TLP) data and the thermal incorporated 2-dimensional simulation analysis demonstrate a characteristic double snapback phenomenon after triggering of biploar junction transistor (BJT) operation. Also, background doping concentration (BDC) is proven to be a critical factor to affect the high current behavior of the EDNMOS devices. The EDNMOS device with low BDC suffers from strong snapback in the high current region, which results in poor ESD protection performance and high latchup risk. However, the strong snapback can be avoided in the EDNMOS device with high BDC. This implies that both the good ESD protection performance and the latchup immunity can be realized in terms of the EDNMOS by properly controlling its BDC.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.19-26
• /
• 2002

We have earlier developed a 40-channel SQUID system. An important figure of merit of a MEG system is the localization error, within which the underlying current source can be localized. With this system, we investigated the localization error in terms of the standard deviation of the coordinates of the ECDs and the systematic error due to inadequate modeling. To do this, we made localization of single current dipoles from tangential components of auditory evoked fields. Equivalent current dipoles (ECD) at N1m peak were estimated based on a locally fitted spherical conductor model. In addition, we made skull phantom and simulation measurements to investigate the contribution of various errors to the localization error. It was found that the background noise was the main source of the errors that could explain the observed standard deviation. Further, the amount of systematic error, when modeling the head with a spherical conductor, was much less than the standard deviation due to the background noise. We also demonstrated the performance of the system by measuring the evoked fields to grammatical violation in sentence comprehension.

• The Korean Journal of Physiology
• /
• v.28 no.2
• /
• pp.143-150
• /
• 1994

The whole-cell mode of the patch clamp technique was used to study $Ca^{2+}-activated\;Cl^-\;current$ $(I_{Cl_{Ca}})$ in gastric antral myocytes. Extracellular application of caffeine evoked $Ca^{2+}-activated\;current$. In order to isolate the chloride current from background current, all known systems were blocked with specific blockers. The current-voltage relationship of caffeine-induced current showed outward rectification and it reversed at around $E_{Cl^-}$. The shift of reversal potential upon the alteration of external and internal chloride concentrations was well fitted with results which were calculated by the Nernst equation. Extracellular addition of N-phenylanthranilic acid and niflumic acid which are known anion channel blockers abolished the caffeine induced current. Intracellular application of a high concentration of EGTA also abolished this current. Application of c-AMP, c-GMP, heparin, or $AIF^-_4$ made no remarkable changes to this current. Sodium replacement with the impermeable cation N-methylglucamine or with $Cd^{2+}$ rarely affected this current. From the above results it is suggested that the caffeine induced current was a $Cl^-$ current and it was activated by intracellular $Ca^{2+}$.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.2
• /
• pp.73-79
• /
• 2004

Nowadays, one of the serious problems in KEPCO system is the larger fault current than the SCC(Short Circuit Capacity) of circuit breaker. There are many alternatives to reduce the increased fault current such as isolations of bus ties, enhancement of SCC of circuit breaker, applications of HVDC-BTB(Back to Back) and FCL(fault current limiter). However, these alternatives have some drawbacks in viewpoints of system stability and cost. As the superconductivity technology has been developed, the HTS-FCL(High Temperature Superconductor-Fault Current Limiter) can be one of the attractive alternatives to solve the fault current problem. Under this background, this paper presents the EMTDC model for resistive type HTS-FCL considering the nonlinear characteristic of final resistance value when quenching Phenomena occur.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.2
• /
• pp.35-38
• /
• 2005

One of the most serious problems in KEPCO system operation is higher fault current than the SCC(Short Circuit Capacity) of circuit breaker. There are many alternatives to reduce the increased fault current such as isolations of bus ties, enhancement of SCC of circuit breaker, applications of HVDC-BTB(Back to Back) and FCL(fault current limiter). But, these alternatives have some drawbacks in viewpoints of system stability and cost. As the superconductivity technology has been developed, the resistance type HTS-FCL(High Temperature Superconductor Fault Current Limiter) can be one of the most attractive alternatives to solve the fault current problem. To evaluate the accurate transient performance of resistance type HTS-FCL, it is needed that the dynamic simulation model considering transient characteristics during quenching and recovery state. Under this background, this paper presents the EMTDC model for resistance type HTS-FCL considering the nonlinear characteristic of final resistance value when quenching and recovery phenomena by fault current injection and clearing occurs.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.2
• /
• pp.73-73
• /
• 2004

Nowadays, one of the serious problems in KEPCO system is the larger fault current than the SCC(Short Circuit Capacity) of circuit breaker. There are many alternatives to reduce the increased fault current such as isolations of bus ties, enhancement of SCC of circuit breaker, applications of HVDC-BTB(Back to Back) and FCL(fault current limiter). However, these alternatives have some drawbacks in viewpoints of system stability and cost. As the superconductivity technology has been developed, the HTS-FCL(High Temperature Superconductor-Fault Current Limiter) can be one of the attractive alternatives to solve the fault current problem. Under this background, this paper presents the EMTDC model for resistive type HTS-FCL considering the nonlinear characteristic of final resistance value when quenching Phenomena occur.

• Journal of Broadcast Engineering
• /
• v.17 no.4
• /
• pp.676-683
• /
• 2012

Motion estimation in video coding greatly affects implementation complexity. In this paper, a reducing method of the complexity in motion estimation is proposed by using both the depth and color cameras. We obtain object information with video sequence from distance information calculated by depth camera, then perform labeling for grouping pixels within similar distances as the same object. Three search regions (background, inside-object, boundary) are determined adaptively for each of motion estimation blocks within current and reference pictures. If a current block is the inside-object region, then motion is searched within the inside-object region of reference picture. Also if a current block is the background region, then motion is searched within the background region of reference picture. From simulation results, we can see that the proposed method compared to the full search method remains the almost same as the motion estimated difference signal and significantly reduces the searching complexity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4976-4994
• /
• 2018

The diffusion-based salient object detection methods have shown excellent detection results and more efficient computation in recent years. However, the current diffusion-based salient object detection methods still have disadvantage of detecting the object appearing at the image boundaries and different scales. To address the above mentioned issues, this paper proposes a multi-scale diffusion-based salient object detection algorithm with background and objectness seeds. In specific, the image is firstly over-segmented at several scales. Secondly, the background and objectness saliency of each superpixel is then calculated and fused in each scale. Thirdly, manifold ranking method is chosen to propagate the Bayessian fusion of background and objectness saliency to the whole image. Finally, the pixel-level saliency map is constructed by weighted summation of saliency values under different scales. We evaluate our salient object detection algorithm with other 24 state-of-the-art methods on four public benchmark datasets, i.e., ASD, SED1, SED2 and SOD. The results show that the proposed method performs favorably against 24 state-of-the-art salient object detection approaches in term of popular measures of PR curve and F-measure. And the visual comparison results also show that our method highlights the salient objects more effectively.

• The KIPS Transactions:PartB
• /
• v.14B no.5
• /
• pp.361-368
• /
• 2007

In this paper, we propose a smoke detection method which is based on block-wise difference of image frames in video. Our proposed method is composed of three steps which are (a) the detection step of the changed regions against the background, (b) the background update step, and (c) the smoke determination step from the changed regions. We first construct the block mean Image of frames in video. And to extract the changed regions against the background, we use a block-wise difference between background's block mean image and a current input frame's block mean image. After applying projections in block-based difference images, we can determine the changed regions as rectangles using projections of difference images. we propose a update scheme of background's block mean image using the projections. We decide the smoke region using the femoral statistics of the central position and YUV color in the changed region.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.617-626
• /
• 2018

This study aims to provide the basic data helpful for the improvement of rights and interests of radiological technologists, by understanding the current working environment and if they get the proper reward through the analysis on the perception of appropriateness of current wage and job satisfaction of radiological technologists. Survey was conducted to evaluate the perception of satisfaction with job and wage system, work intensity, necessity of the radiological technologist limit system, and turnover in accordance. The appropriate starting salary was low in case of women and non-capital area, and when the age, academic background, career, and hospital size were lower. The appropriate wage was low in case of women and non-capital area, and when the academic background and hospital size were lower. The negative perception of the necessity to change the wage system was shown in university hospitals. Regarding the work intensity, in case of women and low career, and when the age, academic background, and hospital size were higher, the work intensity was perceived as high. When the academic degree and hospital size were lower, the positive perception of the radiological technologist limit was shown. The turnover intention was high in case of women, and when the age, academic background, career, and hospital size were lower. In order to increase the job satisfaction of radiological technologists, it would be necessary to the appropriate reward and the environment where they could concentrate on work.