• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.75-78
• /
• 2003

In order to describe the Bauschinger and transient behavior of orthotropic fiber-reinforced composites, a combined isotropic-kinematic hardening law based on the non-linear kinematic hardening rule was considered here, in particular, based on the Chaboche type law. In this modified constitutive law, the anisotropic evolution of the back-stress was properly accounted for. Also, to represent the orthotropy of composite materials, Hill's 1948 quadratic yield function and the orthotropic elasticity constitutive equations were utilized. Furthermore, the numerical formulation to update the stresses was also developed based on the incremental deformation theory for the boundary value problems. Numerical examples confirmed that the new law based on the anisotropic evolution of the back-stress complies well with the constitutive behavior of highly anisotropic materials such as fiber-reinforced composites.

• 한국표면공학회지
• /
• 제41권3호
• /
• pp.121-128
• /
• 2008

High strength 7xxx aluminum alloys have been applied to automotive bump back beam of the some limited model for light weight vehicle. The aluminum bump back beam is manufactured through extrusion, bending and welding. The residual stress given on these processes combines with the corrosive atmosphere on the road spreaded with corrosive chemicals to melt snow to occur the stress corrosion cracking. The composition of commercial 7xxx aluminum has Zn/Mg ratio about 3 and Cu over 2 wt% for better strength and stress corrosion cracking resistivity. But this composition isn't adequate for appling to the automotive bump back beam with high resistance to extrusion and bad weldability. In this study the composition of 7xxx aluminum alloy was modified to high Zn/Mg ratio and low Cu content for better extrusion and weldability. To estimate the resistivity against stress corrosion cracking of this aluminum alloy by slow strain rate test, the corrosion atmosphere and strain rate separate the stress corrosion cracking from conventional corrosion must be investigated. Using 0.6 Mol NaCl solution on slow strain rate test the stress corrosion cracking induced fracture was not observed. By adding 0.3% $H_2O_2$ and 0.6M $Na_2SO_4$ to 1M NaCl solution, the corrosion potential and current density of polarization curve moved to active potential and larger current density, and on the slow strain rate test the fracture energy in solution was lower than that in pre-exposure. These mean the stress corrosion cracking induced fracture can be estimated in this 1M NaCl + 0.3% $H_2O_2$ + 0.6M $Na_2SO_4$ solution. When the strain rate was below $2{\times}10^{-6}$, the stress corrosion cracking induced fracture start to be observed.

• 한국전문물리치료학회지
• /
• 제8권1호
• /
• pp.59-75
• /
• 2001

The purposes of this study were to investigate risk factors of low back pain in civil airmen and to use this information as basis for the back rehabilitation. Subjects of this study were randomly selected 276 civil airmen who had been employed at four airports in Seoul. These data were analyzed by $X^2$ test, t-test, ANOVA, and multiple logistic regression using SAS. The results were as follows: 1) The prevalence of low back pain among 276 civil airmen was 64.9%. 2) The most common cause of low back pain was load lifting (stewardess), long sitting (aircrew A), and long sitting plus training (aircrew B). 3) There were no statistically significant associations among age, height, body weight, and low back pain. 4) No statistically significant relationships were found among the average monthly working time, total working time, average monthly rest time, working year and low back pain. 5) There was statistically significant relation ship between abnormal posture and low back pain (p<.01). 6) There was statistically significant relation ship between fatigue and low back pain among stewardess and aircrew B. 7) There was a statistically significant relationship between job satisfaction and job-related stress (p<.05). 8) In stewardess, higher satisfaction score was associated with less likelihood of low back pain (odds ratio = .80). The results of this study indicate that civil airmen developed chronicity of low back pain due to unfit seat, poor habitual posture, fatigue symptom, and stress or other risk factors. Therefore, there is a need to improve the working environment for the prevention of posture-related low back pain.

• 지역사회간호학회지
• /
• 제7권1호
• /
• pp.100-117
• /
• 1996

The purpose of the survey was to find out the prevalence rate and related factors for low back pain of nurses and to develop educational program for prevention of the low back pain. The subjects of the survey were 593 nurses of general hospitals in Tae-gu City. The survey was conducted from June 10, 1994 to October 3, 1994. The questionnaire included 34 question items concerning general characteristics, factors related to low back pain, physical nursing activities, and characteristics of low back pain. The results were as follows : 1. Among 593 of subjects, the prevalence rate of low back pain showed 62.1%. 2. In relation of health related life activities and low back pain prevalence, self-reported health state was highly significant(P=.000). 3. In relation of work environmental factors and low back pain prevalence, job satisfaction (P=.026), job stress(P=.020), and workload(P=.002) were significant. 4. In relation of physical nursing activities and low back pain prevalence, bending (P=.000), trunk twisting(P=.003), stretching(P=.006), and pulling and pushing(P=.046) were significant. 5. Physical nursing activities inducing back stress was varicant according to wards. The results of this study pointed out that the subjects' low back pain prevalence was related to the work-related physiologic and psychologic factors. Therefore, for the effective prevention of low back pain, both practicing the body mechanics and raising the morale of the nurses are needed in educational program.

• The Journal of Korean Physical Therapy
• /
• 제3권1호
• /
• pp.123-149
• /
• 1991

This study has been attempted to be helpful for the back rehabilization of Korean workers by analyzing the general, occupational, social aspects of low back pain and to identify possible risk factors for back pain in White and Blue collar workers. The primary data were collected from 380 workers in Seoul city by means of a Questionnaire with random which was distributed from March 10 to 31, 1990. For the test of statistical significance, chi-square analysis was used to compare the back pain characteristics between above two groups. The results were as follows : 1. The incidence of low back pain in all walkers studied was $79.7\%$. The incidence of Blue collar with low back pain $(87.2\%)$ was higher than that of White collars $(75.0\%)$. 2. With regard to the relationship of back pain to the occupational characteristics, statistically significant differences were observed between workers with and without back pain concerning the job factors on work-time, job satisfaction, mental stress, chair fittness, work posture, work rotation, weight lifting, monotonous repetitive movements, vibration, and heavy noise (p<0.05). 3. With regard to the relationship of back pain to the social characteristics, there were no differences with respect to having car, personality types, drinking habits, and leisure-time activities. However, significant differences were showed between no pain and pain groups for the using bed, sleeping posture, traffic time amount, walking health state, smoking habits, and physical exercise (p<0.05). 4. The comparative analysis of back pain related to work factors showed highly significant differences with respect to mental stress, chair fittness, work posture, trunk rotation, weight lifting, monotonous repetitive work in White collar group (p<0.01) ; and job satisfaction, mental stress, trunk rotation, weight lifting, monotonus repetitive work, exposure to vibration and heavy noise in Blue collar group(p<0.01). 5. The comparative analysis of social factors in two groups showed differences with respect to the using bed, sleeping posture, walking amount, health state, physical exercise, smoking habits in White cellar group (p<0.05) ; and walking amount, traffic time amount, health state, smoking habits, physical exercise in Blue cellar group (p<0.05). 6. In regard to the general aspects of back pain between two groups, there were differences concerning etiolgy of back pain, counselling partners, treatment types, and sick-leaves(p<0.05), except pain duration, and awareness of back pain.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.27-35
• /
• 2022

Thermoforming is a plastic manufacturing process that applies a force to stretch a film of heated thermoplastic material over an engineered mold to create a 3-dimensional shape. After forming, the shaped part can then be trimmed and finished to specification to meet an end-user's requirements. The process and thermoplastic materials are extremely versatile and can be utilized to manufacture parts for a very wide range of applications. In this study, based on K-BKZ nonlinear viscoelastic model, thermoforming process analysis was performed for an interior room-lamp. The predicted thickness was minimum at the corner of a molded film, and maximum at the center of the bottom. By using the Taguchi method of design of experiments, the effects of process conditions on residual stresses were investigated. The dominant factors were the liner thickness and the film heating time. As the thickness of the liner increased, the residual stress decreased. And it was found that the residual stress decreased significantly when the film heating temperature was higher than the glass transition temperature. A thermoforming mold and a trimming mold were manufactured, and the spring back was investigated through experiments. The dominant factors were film heating time, liner thickness, and lower mold temperature. As the film heating time and liner thickness increased, the spring back decreased. In addition, it was found that the spring back decreased as the lower mold temperature increased.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.303-310
• /
• 2000

A new stress path testing scheme with back pressure equalization process is proposed, to compute the settlement of clay soils based on their probable deformation mode. The proposed testing scheme minimizes the efforts for testing, otherwise numerous testing works are required to simulate the probable stress paths in the field. Furthermore, the proposed testing scheme can supply anisotropic stress paths for consolidation which cannot be possible in a conventional way. The validity and effectiveness of the proposed testing scheme was investigated and confirmed with test results on remolded kaolinite clay soils. Conclusively, it is suggested that the proposed testing scheme is a very effective tool to compute settlement of clay soils and it is also very useful to investigate the anisotropic characteristics of deformation of clay soils.

• 한국산업보건학회지
• /
• 제22권2호
• /
• pp.107-118
• /
• 2012

Objectives: This study examines the occurrence of disease resulting from low back pain and factors of working environment meaningfully influencing the occurrence of lumbago as well as analyzes '2nd Korean Working Condition Survey (KWCS)' conducted in 2010 so as to establish the prevention and improvement measures. Methods: The analysis method is that it is to compare the prevalence rate of low back pain according to working environment via odds ratio and to implement the test about the factors having the difference in working environment between low back pain group and normal group through weighted t-test. Results: As a result, it indicates that there is a meaningful difference for prevalence rate of low back pain according to age, status in employment and education level which are socio-demographical factors. The analysis in working hours shows that the period of work is a factor raising the prevalence rate of low back pain rather than weekly working hours. The analysis in the work risk factor indicates that the increase in prevalence rate of low back pain takes place to either workers with repetitive movement and continuously standing posture or those with heavy stress and emotional labour. Conclusions: Workers with low back pain have suffered from accident, depression, anxiety disorder and sleep. The factors in which the prevalence rate of low back pain decrease are to provide information on health and safety and working speed, and enough rest.

• 대한인간공학회지
• /
• 제33권2호
• /
• pp.135-142
• /
• 2014

Objective: This study aims to develop a new desk with a built-in bookholder and desktop-mounted sliding drawer for reducing stress of seated reading postures and to analyze its effect. Background: It is general for readers to bend their back and neck when reading books on desks, which may result in high back and neck postural stress. In addition, postures using vertically layered drawers positioned at the side of users may be awkward. Method: For reducing the postural stress, a new desk with a built-in bookholder and sliding drawer was developed based on a standard of KS G 4208 for student desk. The muscle activities of reading postures on both existing and new desks were measured using EMG, in which seven male and three female college students participated. The postural stress, and musculoskeletal discomfort and ease of usage for existing and new drawers were analyzed by RULA and questionnaire survey, respectively. Results: Compared to existing desk, the muscle activity for the new desk with a bookholder was reduced by 47% when reading books. In addition, musculoskeletal discomforts in the shoulder, neck and low back were significantly lower when using the new desk with a bookholder. Although the stresses for postures using the desktop-mounted sliding drawer and general drawer were not significantly different, the questionnaire survey revealed that the new desktop-mounted sliding drawer is easier to use. Conclusion: A new desk developed in this study significantly reduced postural stress and enhanced subjective preference when reading. Application: This would be useful when developing new desks with low postural stress.

• 대한의생명과학회지
• /
• 제19권1호
• /
• pp.55-60
• /
• 2013

This study was to know the effects of massage on the back region in order to reduce stress in middle age women. To investigate the effects of massage to the stress levels of middle aged women, we evaluated blood pressure (BP), heart rate variability (HRV), and ultrasonography before and after back massage. The blood pressure after massage was reduced when compared to that of pre-massage. The HRV spectrum analysis was used Frequency domain analysis such as Mean HRV, normalized low frequency (norm LF), norm high frequency (norm HF), and LF/HF ratio. Post-massage BP tended to be low, but not statistical significant. After Massage, the Mean HRV, norm LF, and LF/HF ratio were significantly reduced, while norm HF was significantly increased as compared with pre-massage. The muscle layer and fat layer were significantly diminished by massage. The study was suggested that massage may be an effective treatment for relief of stress.