• Korean Journal of Materials Research
• /
• v.12 no.12
• /
• pp.918-923
• /
• 2002

In this work, CdTe films were deposited on CdS/ITO/glass substrate by a close spaced sublimation (CSS) method. A $Cu_2$Te layer was deposited on the CdTe film by evaporating $Cu_2$Te powder. Then the samples were annealed for p+ ohmic contact. TEM and XRD analysis showed that $CdTe/Cu_2$Te interface exhibited different forms with various annealing temperature. A good p+ ohmic contact was achieved when the annealing temperature was between $180^{\circ}C$ to $200^{\circ}C$. Best cell efficiency of 12.34% was obtained when post annealing temperature was $200^{\circ}C$ for 5 min. Thermal stress test of the CdS/CdTe cells with carbon back contact showed that the $Cu_2$Te contact was stable at $50^{\circ}C$ in $N_2$ and was slowly degraded at $100^{\circ}C$ in $N_2$. In comparison to the conventional carbon contact, the $Cu_2$Te contact showed a better thermal stability.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.5
• /
• pp.819-830
• /
• 2010

This study proposes medical gowns for interns and residents that address the functions of utility and activity. Based on the questionnaires, the prototype focused on the pockets for practical use and movement adaptability. Functional pockets were made by increasing pocket sizes and separating pockets with sections according to use. An inside pocket and a loop for an identification tag was placed on the chest pocket and the side seam pocket were oblique lined. To resolve horizontal stress on the back of the gown,6 cm action pleats were added at both ends of the bladebone. The elbow area was tucked up to improve the workplace activities. To reduce hamper on the gown hemline, slits were added along the gown side seam. The front button was changed into an inside button closure. The cuffs, belt, and back waist belt were removed due to occupational cases of inconvenience. The length of the sleeves was adjusted with belts to improve the movement of the arms. In accordance with design preference, the gown was designed to be knee-length with wrist length sleeves. Blue colored (2.5PB 3/12: by Munsell) material was inserted to reduce the contamination on the neck, cuffs, front closure, and hemline area. The planning cloth of the experimental gown was designed to improve activity function, cleaning, and comfort from light materials. The field test (with 30 doctors at university hospitals and the objective assessment with 9 subject groups)were done by the valuation between the existing gown and the prototype. The results showed that the prototype had to be modified by decreasing the pocket size, expanding the usage of the penholder, and simplify front pockets in order to maintain unity. The loop for the identification tag, inside pocket, and the blue colored material had to be removed. The front closure of the gown had to return to its original state.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.4
• /
• pp.719-728
• /
• 2009

In this study, a training program was conducted to improve the performance of the basic movement of the basket-to-handstand mount. After completion of the training program, the kinematic comparison of the before and after effects were investigated to provide scientific data about this technique. It is recommended that during P1, the center of body mass at the back should push the hip joint to flex quickly, and the shoulder joint should be maintained at a maximum angle. During P2, the body's center of mass must be accelerated so as to create enough momentum to rise efficiently for this, quick extension of both the hip and the shoulder is required. For safety during P3, it is advised that the speed upwards must be increased and that the hands, shoulders, and hip joint must be extended, as in the posture of a handstand. These results stress to coaches the importance of the bodies speed during the ascent in the motion.

• The Journal of Korean Physical Therapy
• /
• v.12 no.2
• /
• pp.7-15
• /
• 2000

Objectives: The purpose of this study w8s to investigate the experience rate and point prevalence and factors related with Low Back Pain(LBP) in men workers for the manufacturing industry. Methods: Questionnaires were completed by 97 men workers for 1 vehicle company in Taegu city in September 6-26, 2000. The information was used to estimate odds ratio and $95\%$ confidence intervals fur the LBP related factors association. Results: The experience rate for LBP was $67.0\%$. point prevalence was $14.4\%$. Variables significantly associated with LBP were weight(p=0.052) and smoking(p=0.010). $57\%$ for patients with LBP was higher than 50.095 far without in normal weight. whereas $43.0\%$ for patients with LBP was smaller than $50.0\%$ for without in overweight. $73.8\%$ for patients with smoking increased than $46.9\%$ for smokers without in smoking. The experience for LBP increased as weight increased(Odds ratio=2.923). As subjects are getting older. experience increased(Odds ratio= 1.393). The higher subjects had experienced stress, the higher experience for LBP was(Odds ratio= 1.328), however all three variables had no significant relationship. Conclusions: Results from this study indicated that a statistically significant association between LBP and weight. smoking in X2-test. In logistic regression test, there were no related variables.

• Journal of Haehwa Medicine
• /
• v.16 no.2
• /
• pp.109-119
• /
• 2007

Xu-lao(虛勞) is deficient disease which is weak body and spirit. It occurs many symptoms, for example lack of appetite, dizziness, involuntary emission of semen, wet dream, back and chest pain, night sweat, cough and so on. In oriental medicine, xu-lao(虛勞) is well-known disease and can be treated easily. In general, xu-lao (虛勞) patiences like to be treated by oriental medical doctors. In spite of improving food, house and clothes, xu-lao(虛勞) is on the increase by fatty foods and stress. In most of these cases, the cooperations of heart and kidney are hurted. On Fang-you-ge-bian(脈證方藥合編) which is the famous prescription book in Korea, gu-an-xin-shen-wan(古庵心腎丸) and Jiu-yuan-xin-shen-wan(究原心腎丸) are used well and have good effects in these cases. Gu-an-xin-shen-wan(古庵心腎丸) can treat white hair, palpitation, involuntary emission of semen, amblyopia, buzzing in the ears, backache and so on. Jiu-yuan-xin-shen-wan(究原心腎丸) can treat lack of appetite, dizziness, involuntary emission of semen, wet dream, back and chest pain, diseased sweat, cough, coldness of hands and feet, and so on. The symptoms of Gu-an-xin-shen-wan(古庵心腎丸) are similar with those of Jiu-yuan-xin-shen-wan(究原心腎丸). But, it is very important that Gu-an-xin-shen-wan(古庵心腎丸) can be used in cases of hot deficient disease but Jiu-yuan-xin-shen-wan(究原心腎丸) can be used in cases of cold deficient disease.

• Journal of the Korean Society of School Health
• /
• v.24 no.1
• /
• pp.99-109
• /
• 2011

Purpose: The purpose of this study was to investigate factors influencing dysmenorrhea in middle school girls and to analyze the differences in dysmenorrhea according to personal factors of the subjects. Methods: This study was conducted from March 22 to April 2, 2010. The subjects of the study were 572 girls who attended three middle schools in Seoul and experienced dysmenorrheal. All were surveyed using the same questionnaire. Data were analyzed by the SPSS/WIN 12.0 program and included descriptive statistics, ANOVA and multiple regression analysis. Results: 1) The mean age of the subjects was 13.53 years, and the mean age of first menstruation (menarche) was 11.94 years. The number of days between the onset of menstrual cycles was 30.01 days. Most of the respondents had irregular menstrual cycles and menstrual periods lasting 3 to 7 days long. 2) Chief menstrual pains were lower abdominal and back pain. Subjects reported experiencing severe lower abdominal and/or back pain, most commonly on the second day of menstruation. The average score of menstrual discomfort was over 60 points (63%). The average score per 6 points of dysmenorrhea was as follows: fatigue (3.48), sensitivity (3.27), disability of movement (3.27), napping or lying down (2.98), mood swings (2.95), interference with studies (2.87). 3) Individual subject characteristics influencing the onset of dysmenorrhea were as follows: high stress levels, being in poor health, having an irregular diet, being younger and having longer menstrual periods than most other subjects. Conclusion: During puberty, girls with earlier menarche complained of physical and emotional discomfort, and irregular menstrual periods. Therefore, we need to explain overall menstrual characteristics and individual differences in the occurrence of dysmenorrhea, in health education programs.

• Cross-Cultural Studies
• /
• v.30
• /
• pp.73-95
• /
• 2013

The purpose of this paper look at the basis of the cultural differences of Korea and Japan by comparing the view about the death. Firstly, in terms of language to express the death, Korea can be summarized 'doragada (go back) Japan can be summarized sayonara(goodbye). Koreans' view about the death is that life and death are not separated and death is the start of another life not the end of existence through 'doragada' Japanese accept death as the order of the universe and the order of nature with resignation. At this time resignation means that Japanese accept the sad feeling to sublimate aesthetically while mourning the death Secondly The view about the death of Sunbee in the Joseon era and Japanese Samurai who were the traditional ideal figures is compared. The Sunbee dies from a justification and the Samurai die from the honor on the other hand. Unconditionally, the sunbee was not loyal to an individual but they thought significantly of the fidelity about the joint value. Unlike this, Japanese Samurai laid stress on the loyalty toward their lord and sacrifice. They selected the death conclusively when this fidelity was suspected. Thirdly the view about the death of Korea and Japan is summarized to the aesthetics of the survival and the aesthetics of the death. Korean saw the death negatively and regard exceedingly the extension of life, they preceded to survive in all kinds of difficulties. On the contrary, Japanese see it positively. They beautified the death and sublimated with the aesthetics. they pursue the nature of the life through the death. Finally, the basic difference of the korean and Japanese culture originate from the view about the death that is, the difference of the values about the life and death.

• Corrosion Science and Technology
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2019

To find proper lathe machining parameters for SA182 Grade 304 stainless steel (SS), six kinds of samples with different machining surface states were prepared using a lathe. Surface morphologies and microstructures of near surface deformed layers on different samples were analysed. Surface morphologies and chemical composition of oxide films formed on different samples in simulated primary water with $100{\mu}g/L\;O_2$ at $310^{\circ}C$ were characterized. Results showed that surface roughness was mainly affected by lathe feed. Surface machining caused grain refinement at the top layer. A severely deformed layer with different thicknesses formed on all samples. In addition to high defect density caused by surface deformation, phase transformation, residual stress, and strain also affected the oxidation behaviour of SA182 Grade 304 SS in the test solution. Machining parameters used for # 4 (feed, 0.15 mm/r; back engagement, 2 mm; cutting speed, 114.86 m/min) and # 6 (feed,0.20 mm/r; back engagement, 1 mm; cutting speed, 73.01 m/min) samples were found to be proper for lathe machining of SA182 Grade 304 SS.

• The Journal of the Korea Contents Association
• /
• v.21 no.6
• /
• pp.44-50
• /
• 2021

In this paper, we analyze the efficiency of light sources of CCFL and LED monitors. Cold Cathode Fluorescent Lamp (CCFL), which is widely used as a light source for LCD display, supplies a high voltage of 1,200[V] or more when it is initially driven. In addition, a constant normal voltage of 400 ~ 800[V] after lighting, and 3 ~ 6[ mA] is needed for a power circuit that can stabilize the current. Applying a high voltage causes a lot of stress on the inverter and generates a lot of heat in the cold cathode lamp, causing significant damage to the BLU (Back Light Unit), resulting in a burning phenomenon, which causes the screen to output normal colors when outputting the screen. We can not see the yellow output and the screen darkened. Therefore, in order to prevent such a symptom in advance, efficiency can be increased by using a Light Emitting Diode (LED) as the light source of the LCD display instead of a cold cathode fluorescent lamp (CCFL). As a result, it is shown that the LED method outperforms the CCFL method.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.899-908
• /
• 2022

In this study, a study was conducted to localize a large aluminum turbo fan used for tank powerpack. The turbo fan was scanned with a 3D scanner and then 3D modeling was performed. Computational fluid dynamics (CFD) were performed from the performance conditions of the fan, and structural analysis was performed using the pressure data obtained from CFD. The fan was reduced to 1/5 size by applying the geometric similarity. A 1/5 size fan has a honeycomb structure inserted into the front shroud and back shroud to reduce the weight by 5.3%. A 1/5 size fan was printed using a PBF 3D printer, and a 1/5 size fan with honeycombs was also printed. The pressure drop of 8.67 kPa and the required power of 138.19 kW, which satisfies the performance conditions of the fan, were confirmed from the results of CFD. The values of the maximum deformation amount of 0.000788 mm and the maximum effective stress of 0.241 MPa were confirmed from the structural analysis results. The fan printed by the PBF 3D printer had the same shape as the modeling, and the shape was perfect. There are no defects anywhere in appearance. However, the condition of the outer surface of the fan's back shroud is rough compared to other locations. The fan in which the honeycomb was inserted was also perfectly output, and the shape of the honeycomb was the same as the modeling.