• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.436-437
• /
• 2008

Flexible CIGS thin film solar cell was fabricated using STS430 plate as a flexible substrate in this work. A diffusion barrier layer of $SiO_2$ thin film was deposited on STS430 substrate by PECVD followed by deposition of double layered Mo back contact. After depositing CIGS absorber layer by co-evaporation, CdS buffer layer by chemical bath deposition, ZnO window layer by RF sputtering and Al electrode by thermal evaporation, the solar cell fabrication processes were completed and its performance was evaluated. Corresponding solar cell showed an conversion efficiency of 8.35 % with $V_{OC}$ of 0.52 V, $J_{SC}$ of 26.06 mA/$cm^2$ and FF of 0.61.

• Solar Energy
• /
• v.17 no.2
• /
• pp.23-33
• /
• 1997

This paper reviews the advanced solar cell structures used in space. These are the structures which incorporate the back surface field and reflectors with very shallow and lightly doped emitters. Their use in space has shown that the thinner cells are more resistive to radiation damage than the thicker ones. It has been found that the charged particles affect both the surface and bulk of the cells used in space. This causes degradation in the output power, which in effect, can be explained by the degrading diffusion length of the cells. The PERL cells showed higher BOL(beginning of life) efficiency and almost the same EOL(end of life) efficiency as structures with wrap-around contact configuration fabricated on 10 ${\Omega}cm$ resistivity substrates. This observation lead to a conclusion that, the space cells do not necessarily need to have very high BOL efficiency except in specific missions which require such.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.3
• /
• pp.182-185
• /
• 2007

Acute stroke with isolated monoparesis manifesting as distal weakness of a single lower extremity has rarely been described. We report two patients with small cortical infarction who had distal weakness of a single lower extremity. In both cases, diffusion-weighted image [DWI] was used to detect small lesions in the contralateral cortex. These cases illustrate that small cortical infarction can cause isolated monoparesis limited to distal part of the leg and it may be misdiagnosed as spinal lesions, especially when lower back pain and transient sensory symptoms are accompanied. In case of the abrupt onset of weakness limited to one lower limb, the possibility of stroke should be considered and careful attention to identify cortical lesions using magnetic resonance imaging, especially DWI is required.

• Journal of the Korean Society of Safety
• /
• v.6 no.3
• /
• pp.40-49
• /
• 1991

To better understand the phenomena inside an absorber, where heat and mass transfer coexist, this study selected the most baslc absorption model from in whifh water vapor is absorbed on the surface of a stationary lithium bromide absurbent solution. The purpose of this study is to obtain basic knowledge of heat and mass transfer processes as affected by Marangoni convection induced by addition of surfactant. We apply a non-flowing bulk absorption model and assume that dropwise surfactant is fixed on the absorbent surface. Four governing equation-continuity, laminar monentum, energy and diffusion are solved numerically to obtain temperature and concentraion distributions during steam absorption with Marangonl convection.. In conclusion, Sh and Nu genrally increase at the initial absorption stage.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1330_1331
• /
• 2009

n형 특성을 가진 실리콘 나노선을 금확산을 이용하여 p형 특성을 가진 상태의 나노선으로 변환하였다. Back-gate 형태로 제작된 n형의 실리콘 나노선 전계 효과 트랜지스터를 제작한 후, 채널로 사용되는 나노선 위에 금을 열증착방법을 이용하여 증착했다. 이후, 급속열처리공정을 통해 실리콘 나노선에 금이온을 확산시켰다. 나노선의 특성 변환을 확인하기 위하여 전계 효과 트랜지스터의 특성곡선을 통해 그 변화를 관찰하였다.

• Communications of the Korean Mathematical Society
• /
• v.10 no.1
• /
• pp.39-48
• /
• 1995

The ADI method was introduced by Peaceman and Rachford [6] in 1955, to solve the discretized boundary value problems for elliptic and parabolic PDEs. The finite difference discretization of the model elliptic problem $$ (1) -\Delta u = f, \Omega = [0, 1] \times [0, 1] $$ $$ u = 0 on \delta \Omega $$ with 5-point centered finite difference discretization, with n +2 mesh-points in the x - direction and m + 2 points in the y direction, leads to the solution of a linear system of equations of the form $$ (2) Au = b $$ where A is a matrix of dimension $N = n \times m$. Without loss of generality and for the sake of simplicity, we will assume for the remainder of this paper that m = n, so that $N = n^2$.

• Journal of ILASS-Korea
• /
• v.15 no.2
• /
• pp.67-73
• /
• 2010

The capability of pilot injection with small fuel quantity at all engine operating conditions is one of the main feature of the common rail direct injection system. The purpose of the pilot injection is to lower the engine noise and to reduce the NOx emissions. This study describes the pilot spray structure characteristics of the common-rail diesel injectors with different electric driving characteristics, including solenoid-driven and piezo-driven type. Namely three common-rail injectors with different electric current wave were investigated in this study. The pilot spray characteristics such as spray speed, spray tip penetration, and spray angle were obtained by spray images, which is measured by the back diffusion light illumination method with optical system for high-speed temporal photography. As this research results, it was found that pilot injection of common-rail system was effected by rate of injection with different electrical characteristic for injector driving.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.01a
• /
• pp.133-134
• /
• 2017

본 논문에서는 APT 공격의 공격 시나리오와 그에 따른 방어 시나리오를 구상하여 기존 방어법의 문제점을 찾고 방어대책을 제시하고 솔루션을 구축하였다. 제안된 방어 프로세스는 기존의 방식과 달리 END-POINT에서 침투에 대해 모니터링을 통하여 APT공격에 대응하는 방식이다. 공격 툴 넷버스, 백오리피스, 서브세븐, 스쿨버스를 이용해서 공격을 시도 한 뒤 본 논문에서 구축한 방어 프로세스를 이용하여 방어 실험을 실시하였다.

• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.274-279
• /
• 2015

This paper describes optimizing fabrication methods for 2-axis electrically levitated MEMS gyroscope. Electrostatically levitated gyroscope has very high potential of performance due to the fact that its proof mass is not mechanically bound to any other structures, but its complex structure and difficulty of fabrication holds back the research that only a few researches have been reported. In this work, fabrication method for glass-silicon-glass 3-floor structure for 2-axis electrically levitated MEMS gyroscope is presented, including simplified multi-level glass etch method utilizing photoresist attack, preventing metal diffusion by adding middle layer of metal electrode, overcoming Deep RIE limitation by separate fabrication of silicon structures and keeping the electrode safe from dicing debris.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.4
• /
• pp.485-495
• /
• 2001

This paper presents a similarity solution for the directional casting of binary peritectic alloys in the presence of shrinkage-induced flow. The present model retains essential ingredients of alloy solidification, such as temperature-solute coupling, macrosegregation, solid-liquid property differences, and finite back diffusion in the primary phase. An algorithm for simultaneously determining the peritectic and liquidus positions is newly developed, which proves to be more efficient and stable than the existing scheme. Sample calculations are performed for both hypo- and hyper-peritectic compositions. The results show that the present analysis is capable of properly resolving the solidification characteristics of peritectic alloys so that it can be used for validating numerical models as a test solution.