• The Journal of Korean Medicine
• /
• v.20 no.2
• /
• pp.157-164
• /
• 1999

This study focused on the method of interpreting Moire's topography. There has been no standard of interpretation which informed, this study, The conclusions arc as follows: Miore's image closed contour lines which is consisted of points. These points in one contour have the same distances from the screen to the patient's back. Moire's index means the number of contour gaps from symmetrical point of a specific point with the axis of central line. The number of contours which pass the median line means the degree of antero-posterior curvature.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1089-1090
• /
• 2011

This paper presents a novel two-phase two-pole permanent magnet synchronous motor (PMSM) with asymmetric U-core stator structure. The construction and parameters of the novel two-phase U-core PMSM are compared with a conventional U-core single-phase PMSM (SPMSM). Then transient characteristics such as torque, back-emf, and power loss of the both PMSMs are analyzed by using 3-D Finite Element Method (FEM). Under the same condition of rated input current, synchronous speed, similar dimensions and volume, FE results show that the two-phase PMSM with U-core stator has significantly less torque ripple than single-phase U-core PMSM, with similar power loss and efficiency.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.880_881
• /
• 2009

This paper improves the calculating method about the inductance with the high order frequency coreloss. It is different in which the analyzed inductance for calculating IPMSM and the measured thing for experiment. Due to this phenomenon, the expected input voltage differs from the inquired input voltage for operating the motor. This results from the coreloss margin which have both the 1st order and high order frequency value. For reducing the inductance error, after calculating the equivalence coreloss resistance with having the 1st order frequency Back_EMF and coreloss, designing the inductance with the high order frequency which occurred by the coreloss of high order frequency, and comparing the renovated inductance analysis value with the measured thing.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.122-127
• /
• 2001

In this paper, it is presented a new scheme of adaptive-neuro control system to implement real-time control of robot manipulator. Unlike the well-established theory for the adaptive control of linear systems, there exists relatively little general theory for the adaptive control of nonlinear systems. Adaptive control technique is essential for providing a stable and robust performance for application of robot control. The proposed neuro control algorithm is one of learning a model based error back-propagation scheme using Lyapunov stability analysis method. Through simulation, the proposed adaptive-neuro control scheme is proved to be a efficient control technique for real-time control of robot system using DSPs.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.231-236
• /
• 2001

The goal of multiphase optimization of machine structure is to obtain 1) light weight, 2) statically and dynamically rigid structure. The entire optimization process is carried out in two phases. In the first phase, multiple optimization problem with two objective functions is treated using pareto genetic algorithm. Two objective functions are weight of the structure, and static compliance. In the second phase, maximum receptance is minimized using genetic algorithm. The method is applied to design of quill type machine structure with back column.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.190-195
• /
• 2001

The piercing and blanking of thin sheet metal working is specified division in press die design and making. In order to prevent the defects, the optimum design of the production part, strip process layout, die design, die making and try out etc. are necessary the analysis of effective factors. For example, theory and practice of metal shearing process and it's phenomena, die structure, machine tool working for die making, die materials and it's heat treatment, metal working in field, their know how etc. are included in those factors. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.396-405
• /
• 1997

The purpose of this study was to investigate the wearing condition according to different basic slacks'patterns and to provide fundamental data on structuring slacks' pattern using the multi-dimensional measuring method. 3 different kinds of basic slacks' patterns (A, B, C) were used and cross-sectional measurements of 6 parts were analysed. The results were as follows; 1) It revealed that the girth of waist, hip and thigh effected the degree of ease amounts. 2) Moira pattern shape fully supported that the considerable body parts affected the change of ease amounts. 3) Basic pattern A was usually expected to be suitable for standard-sized or unmarried women who had not experienced body-type change. 4) Basic pattern B and C were suitable for large-sized or married women whose body·type had changed. Therefore the crotch length and depth, gredient of center back line has to be set up accurately.

• Korean Journal of Human Ecology
• /
• v.12 no.1
• /
• pp.63-73
• /
• 2003

The purpose of this study was to quantify the hands of fabrics for the Korean folk clothes using both a KES-FB and an artificial neural network. In order to select the proper input parameters, we calculated the correlation using step-wise regression between mechanical properties and the hand value of fabrics. For the classification, the primary hand values and total hand value, five neural networks with three-layered structure were constructed using the error back propagation algorithm and, in order to reduce errors and to speed up learning, the momentum method was selected. From the analysis of the primary and total hands using a self-constructed artificial intelligence system, the error rates of sleekness, stiffness, silkiness, and roughness compared with the judgement of expert panels were found to be 3.3%, 3.3%, 1.6%, and 4.9%, respectively, while that of the total hand was 9.83%.

• Structural Engineering and Mechanics
• /
• v.44 no.2
• /
• pp.127-138
• /
• 2012

The composite materials may be exposed to environmental (thermal or hygral or both) condition during their service life. The effect of environmental condition is usually adverse from the point of view of design of composite structures. In the present research study the effect of hygrothermal condition on the design of laminated composite structures is investigated. The active fiber composite (AFC) which may be utilized as actuator or sensor is considered in the present analysis. The sensor layer is used to sense the level of response of the composite structures. The sensed voltage is fed back to the actuator through the controller. In this study both displacement and velocity feedback controllers are employed to reduce the response of the composite laminate within acceptable limit. The Newmark direct time integration scheme is employed along with modal superposition method to improve the computational efficiency. It is observed from the numerical study that the laminated composite structures become weak in the presence of hygrothermal load. The response of the structure can be brought to the acceptable level once the AFC layer is activated through the feedback loop.

• Communications for Statistical Applications and Methods
• /
• v.10 no.3
• /
• pp.835-844
• /
• 2003

A difficulty in spatial data analysis is to choose a suitable theoretical variogram. Generally mean squares error(MSE) is used as a criterion of selection. However researchers encounter the case that the values of MSE are almost the same whereas the estimates of parameters are different. In this case, the selection criterion based on MSE should take into account the parameter estimates. In this paper we study on the method of selecting a variogram using spatial correlation.