• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.67-75
• /
• 2004

The landslide is one of the most significant natural disasters, which cause a lot of loss of human lives and properties. The landslides in natural slopes generally occur by complicated problems such as soil properties, topography, and geology. Artificial Neural Network (ANN) model is efficient computing technique that is widely used to solve complicated problems in many research fields. In this paper, the ANN model with application of error back propagation method was proposed for estimation of landslide hazard in natural slope. This model can evaluate the possibility of landslide hazard with two different approaches: one considering only soil properties; the other considering soil properties, topography, and geology. In order to evaluate reasonably the landslide hazard, the SlideEval (Ver, 1.0) program was developed using the ANN model. The evaluation of slope stability using the ANN model shows a high accuracy. Especially, the prediction of landslides using the ANN model gives more stable and accurate results in the case of considering such factors as soil, topographic and geological properties together. As a result of comparison with the statistical analysis(Korea Institute of Geosciences and Mineral Resources, 2003), the analysis using the ANN model is approximately equal to the statistical analysis. Therefore, the SlideEval (Ver. 1.0) program using ANN model can predict landslides hazard and estimate the slope stability.

• Design & Manufacturing
• /
• v.12 no.1
• /
• pp.52-57
• /
• 2018

With the recent strengthening of environmental regulations and the need for cost reduction, excavators, a type of construction equipment, are being miniaturized while components are being developed in consideration of stability. In the case of excavator press parts, mainly high-strength steel sheets are being used to enhance stability and reduce weight. However, in the case of high-strength materials, there is a need to research product forming methods to reduce Springback in defects arising in parts assembly due to Springback that result from the internal residual stress that occurs in press forming being released after product forming. Accordingly, regarding the tank cover, an excavator press-forming part, this study selected a method to reduce distortion through analysis of the Springback occurrence rate and Springback causes through a forming analysis. A forming analysis was conducted for the Springback of the tank cover. Deformations of 13.714 mm in the upper part and 6.244 mm in the inner part of the product occurred, while wrinkles occurred on the sides of the product due to uneven thickness. A forming analysis was conducted for the major shapes of the product to investigate the causes of Springback. Distortion deformation due to the bead in the center of the product was confirmed to be a large factor. A Springback reduction method of correcting uneven thickness in the product sides, a Springback reduction method of removing the bead, and a correction method of restriking after the final forming were used in a forming analysis to determine the degree of Springback reduction. For the forming method to correct uneven thickness in the sides, deformation was reduced by 12% in the upper side compared to the existing model, but deformation in the inner side increased by 1%. For the restriking forming method, deformation decreased by 25% in the upper side and 13% in the inner side. For the bead removal method, deformation decreased by 28% in the upper side and 13% in the inner side, the largest Springback correction results. This indicates that the bead has a large affect on Springback.

• Journal of the Korean Society of Costume
• /
• v.28
• /
• pp.99-112
• /
• 1996

In this study I purpose a new approach to the study of Korean costume history which includes a statistical method used in the prac-tical measurement of excavated Po's and the analysis of their quantitative changes. In the framework used in this study I de-pend on the nineteen variables picked out from the typological and chronological analysis of excavated clothes. The interrelationship of the variables as well as the standard of each part and its deviation in other forms are may main concern. Other methods are also very useful in my thesis: Correlation analysis Regression analysis Discrimination analysis Cluster analysis Discrimination analysis Cluster analysis Factor analysis One way analysis of variance. The findings of my study can be summarized as follows: 1. Every type of po has a general tendency to have more broadened sleeves while it does not show any considerable changes in the total length and in the width of armholes. 2. In the Correlation analysis each part of Po's is handled separately accordign to its chronology and type. The Regreesion analysis makes it possible to provide the sizes of miss-ing parts in excavated clothes and the numeri-cal value of each part needed in the pattern making. 3. The Discrimination analysis of the Po's whose types are unknown leads to the con-clusion that Chongsam and Chikryong Po are classified into Chikryong Po whereas Hongui is classified into Jooui In addition I propose discriminational function by which the age classification is possible discovering the variables associated with time change. 4. Five items-Gerneral Park's clothes Taewongun's clothes and three others produced later for the purpose of preserving Korean costume are proved to be in a differ-ent group and hence analyzed separately in the visual grouping of changui which is done after the cluster analysis and the factor analysis. 5. The results of the one way analysis of variance reveal that there is a difference in each part from period: the back width the sleeve length the sleeve width thelean fig-ure the breasttie length the breasttie width outside quesset upper inside quesset lower outside neckband length insideneckband length etc.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.159-179
• /
• 2006

This research checked about the necessity for the development of men's dress forms in the first investigation for the educational circle and the men's wear industry. Somatotype characteristics were analyzed in the second investigation of body measurement with the subjects of 200 male adults in their twenties residing in Busan. The following are the results of the present research to develop male dress forms for patternmaking: 1. In the group analysis for the characterization of front body types, three somatotypes were found and named H, Semi X, and Y. In the cluster analysis of side body types, four types were identified: D, I, d, and q. In the combination of front and lateral body types, four kinds were chosen: semi X-I, semi X-q, semi Y-I, and Y-q. 2. Through the comparison of plane figures by the plaster method as well as horizontal and vertical cross sections by the sliding gauge method, semi X-I was finally chosen as the standard somatotype for male dress form development. 3. Compared with the sliding gauge method of the present dress forms, the research dress form reflected better the shapes of the parts of the back and hips and the position of the waist, especially for males in their 20's. In addition, the dress form in the current research had superior points in all the items of clothing evaluation. Based on the above results, the sizes and models of the men's dress forms for patternmaking were developed.

• Journal of Korean Society on Water Environment
• /
• v.34 no.2
• /
• pp.173-182
• /
• 2018

Reservoirs, facilities to store water, are being used in several fields for their ability to hold back a large quantity of water for a long time before the water is actually used. However, at the same time, the reservoirs are considered to have a flaw: the longer they store water, the more the quality of water in these reservoirs deteriorates. Further, when the reservoirs are large, they are more likely to have dead-water regions in out-of-the way spots far from either an in-current or an ex-current canal. This study conducted a Computational Fluid Dynamic (CFD) simulation and tried to figure out the internal flow inside each of the reservoirs with different in-current canals built by the multiple hoe screw nozzle method and the drop in-current method. The drop in-current method is more frequently used. According to the analysis of the internal flow inside each reservoir with the different methods applied, we found that the reservoir with the drop in-current canal would have two rotary currents in the lower region of the reservoir and that the velocity of flow would decrease. For a reservoir with the screw nozzle method, a single rotary current occurred, and inside the reservoir, regardless of height, the current turned out to flow in a regular manner.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.11
• /
• pp.958-967
• /
• 2014

A hybrid method based on high-frequency asymptotic optics was developed in order to predict the RCS of flying vehicles for RCS reduction studies. In cavity return, the rays are assumed to bounce from the inlet cavity based on the laws of geometrical optics and to exit the cavity via the aperture. In other parts of a flying vehicle, the physical optics method is applied to compute the back-scattered field from the solid surface. The hybrid method was validated by considering simple models of sphere and sphere with cavity. In addition, RCS analysis of a flying vehicle was conducted using the new hybrid electromagnetic scattering method based on physical optics and geometrical optics theories.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.179-186
• /
• 2009

In this paper, we propose a head detection method based on vertical and horizontal pixel histogram analysis in order to overcome drawbacks of the previous head detection approach using Haar-like feature-based face detection. In the proposed method, we create the vertical and horizontal foreground pixel histogram images from the background subtraction image, which represent the number of foreground pixels in the same vertical or horizontal position. Then we extract feature points of a head region by applying Harris corner detection method to the foreground pixel histogram images and by analyzing corner points. The proposal method shows robust head detection results even in the face image covering forelock by hairs or the back view image in which the previous approaches cannot detect the head regions.

• Analytical Science and Technology
• /
• v.20 no.2
• /
• pp.115-123
• /
• 2007

The heterocyclic amines (HAs) are a family of mutagenic/carcinogenic chemicals formed from the cooking of muscle meats such as beef, meat, fowl, and fish. A major draw back in the analysis of HAs from foods is their very low level of concentration (ng/g) and a number of matrix interferences in samples. Solid-phase extraction (SPE) is one of the procedures widely used for the extraction and purification of HAs in food samples. In this study, several SPE procedures of HAs determination were performed. Recoveries of the HAs were obtained from comparing a matrix such as a standard methanolic solution and pre-cooked meat extracts. Recovery values were ranging between 25.3 and 93.0 % at a concentration of 25.0 ng/g. HAs were determined with high sensitivity by micro-HPLC (${\mu}$-HPLC) analysis with electrospray ionization mass spectrometry (ESI-MS). Another developed method, which is freezing filtration method, shows better extraction recoveries and good precisions. The established method will be applicable to monitoring of heterocyclic amines from the cooked meat.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.527-536
• /
• 2005

The perturbations caused by the Sun and the Moon are predominantly out-of-plane effects causing a change in the inclination and in the right ascension of ascending node of a geostationary satellite. Due to the change of the inclination, subsatellite latitude of the geostationary satellite has a daily variations of the same magnitude of the inclination. Therefore we need a facility to control the orbital inclination and right ascension of ascending node for maintaining the satellite position in specified subsatellite latitude boundary using thrusters. In this paper we studied North-South station keeping strategies of the COMS-1 such as Track-Back Chord Target (TBCT) method, Maximum Compensation Target (MCT) method and Minimum Fuel Target (MFT) method. We accomplished those North-South station keeping maneuvers for one year starting from December 2008. The required velocity increments to maintain the satellite are estimated as MCT 52.6065m/s, TBCT 52.2383m/s, MFT 51.5428m/s, respectively. We demonstrated that TBCT and MFT methods are proper to North-South station keeping for COMS-1. MFT method showed the minimum required velocity increments whereas TBCT traced narrow inclination boundary area for North-South station keeping.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.2
• /
• pp.154-161
• /
• 2005

In the machine tool industry, direct drive linear motor technology is an interesting means to achieve high acceleration, and to increase reliability. This paper analyzes and compares the characteristics of a tubular linear motor with Halbach and radial magnet array, respectively. First, the governing equations are established analytically in terms of the magnetic vector potential and two dimensional cylindrical coordinate systems. Then, we derive magnetic field solutions due to the PMs and the currents. Motor thrust, flux linkage and back emf are also derived. The results are shown to be in good conformity with those obtained from the commonly used finite element method. Finally, control parameters are obtained from analytical solutions.