• Journal of the Korean Ceramic Society
• /
• v.34 no.7
• /
• pp.703-712
• /
• 1997

The PTCR devices of BaTiO3 doped with Sb2O3, SiO2 were prepared by Liquid Addition Method(LPAM) where doping sources were used in the forms of Liquid. The amounts of doping in LPMA is smaller than that in solid state mixing method. Also the doping process in LPMA is very suitable for BaTiO3-based PTCR devices because it is easy to obtain homogeneous mixing and reproductivity. By optimizing the doping condition in BaTiO3 system, (0.09 mol% Sb2O3, 0.25 wt% SiO2 and 0.02 wt% MnO2) it was possible to fabricate BaTiO3-based PTCR devices whee the room-temperature resistivity and specific resistivity were 15{{{{ OMEGA }}cm and 2$\times$106 respectively.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.267-272
• /
• 1997

he scintillation detector having $BaF^2$ crystal with 3.6cm dia${\times}$2.0 cm thick was provided. The energy and timing characteristics were measured and compared with NaI(Tl) scintillation detectors, which widely used in unclear medicine. In order to measure the energy spectrum, the radioactive sources used were $^{22}Na,\;^{54}Mn,\;^{57}Co,\;^{137}Cs$ and the source to detector distance was 7cm. For the timing characteristic, NaI(Tl)(1" ${\times}$ 1")-$BaF^2$ and NaI(Tl)(3" ${\times}$ 3")-$BaF^2$ timing coincidence systems were prepared and the used source was $^{22}Na$ emitting 511keV annihilation photons. For the 511keV gamma-ray emitted from $^{22}Na$, It was revealed that the timing response of the $BaF^2$ detector was faster than NaI(Tl)(1" ${\times}$ 1") and NaI(Tl)(3" ${\times}$ 3") detector used in this experimental investigation. The energy characteristics of the $BaF^2$ detector had a good values for about 500keV energy range.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.320-323
• /
• 1997

The microwave dielectric properties of X Ba0-$0.15(Nd_{0.87}Bi_{0.13})_2O_3$-(0.85-X) $TiO_2$ ($X=0.13{\sim}0.17$) and 0.16Ba0-$0.15(Bi_xNd_{1-x})_2O_3-0.69TiO_2$ ($X=0.10{\sim}0.16$) ceramics were investigated. Dielectric constant, quality factor and temperature coefficient of resonant frequency of 0.16Ba0-$0.15(Nd_{0.87}Bi_{0.13})_2O_3-0.69TiO_2$ ceramics sintered at $1320^{\circ}C$ for 2 hours were 89.2, 1920(at 4GHz) and 5.2ppm/$^{\circ}C$, respectively.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.133.2-133.2
• /
• 2000

• Corrosion Science and Technology
• /
• v.5 no.4
• /
• pp.149-152
• /
• 2006

$BaTiO_3$ coatings were prepared by micro arc oxidation (MAO) method. Only $Ba(OH)_2$ was dissolved in the electrolyte and process time was less than 30 min. Commercial purity $Ba(OH)_2$ (97%) containing $BaCO_3$ as impurity was used in preparing the electrolyte. XRD showed that the coating was composed of largely $BaTiO_3$, and in some process conditions, small quantity of impurity, $BaCO_3$, was characterized in the coating layer. The quantity of $BaCO_3$ could be controlled to negligible quantity by regulating the applied voltage and duration time of the MAO process.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.3
• /
• pp.252-261
• /
• 1994

The $(Ba_{1-X}Sr_X)ZrO_3$ powder showing chemically pure and fine particle size was attempted to be synthesized by the oxalate method. The objective of this study is to determine the optimum synthesis condition of stable $(Ba_{1-X}Sr_X)ZrO_3$ powder in terms of the temperatures coefficient of resonant frequency ${\tau}_f$ by examining the microstructure and dielectric properties of the synthesized powder. The six compounds (x=0, 0.2, 0.4, 0.6, 0.8, 1) of $(Ba_{1-X}Sr_X)ZrO_3$ were prepared by the oxalate method, and then calcined at $1000^{\circ}C$ to obtain the crystalline $(Ba_{1-X}Sr_X)ZrO_3$ powder. The synthesized powder showed the globular-shape and average particle size of less than $0.2 \mu\textrm{m}$. The composition of x=0.5, i.e., half of Ba was replaced by Sr, is experted to show the zero value of temperatures coefficient of capacitance ${\tau}_c$.

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.150-153
• /
• 2011

Betulinic acid (BA), a naturally occurring triterpene found in the bark of the white birch tree, has been investigated to induce apoptosis in various cancer cells and animal models. However, there is no report of the chemopreventive effect of BA in cervical cancer cells. Using KB human cervical cancer cells as a model, we currently show that BA decreases cell viability and induces apoptotic cell death. The mechanism of the BA-induced anti-growth response in KB cells is due to the down-regulation of specificity protein 1 (Sp 1) and its downstream targets, myeloid cell leukemia-1(Mcl-1) and survivin. Thus, BA acts as a novel chemopreventive agent through the regulation of Sp1 that is highly expressed in tumors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.224-225
• /
• 2006

$BaTiO_3$ powder를 epoxy/solvent에 혼합한 슬러리와 solvent에 혼합한 슬러리의 분산 특성을 평가하기 위하여 분산제인 silane을 $BaTiO_3$ powder 표면에 코팅한 powder를 이용하여 분산실험을 진행하였다. Silane 표면 코팅 량에 따른 $BaTiO_3$ 슬러리와 $BaTiO_3$/epoxy 복합 슬러리의 분산 특성은 서로 다른 경향으로 나타남을 확인하였으며, silanae 최적 첨가량은 $BaTiO_3$/solvent 슬러리의 경우 0.3~0.5 wt%, $BaTiO_3$/epoxy/solvent 슬러리의 경우 1wt% 이상 첨가한 조건이었다. 또한 분산성 측정의 방법으로 점도 측정 방법과 함께 표면 거칠기 측정 방법의 가능성을 확인하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.115-115
• /
• 2005

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.99.1-99
• /
• 2003