• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권2호
• /
• pp.92-98
• /
• 2002

It is necessary to measure the solar cell parameter fur understanding characteristic of solar cell and applying to many other fields. Since photovoltaic system consists of solar cell module, which are connected each other in series and parallel, it is not proper to apply a solar cell parameter to photovoltaic system. Therefore, to estimate the solar tell module and to solve the problem of the established algorithm is on demand. In this paper the authors have improved the accuracy of solar cell module Parameter estimation by compensating series and Parallel resistance, and developed a new parameter estimation algorithm, which can be applied to photovoltaic system without high cost measuring equipment. And the validity of proposed algorithm is verified by the simulation and experimentation.

• 전자공학회논문지
• /
• 제50권1호
• /
• pp.215-224
• /
• 2013

본 논문은 주행중 차량에 장착된 카메라의 자세 변화를 카메라 외부 파라미터의 변화로 간주하고, 이의 추정을 통하여 도로의 요철과 전방 도로의 기울기 변화 등에 강건한 차선 검출 알고리즘을 제안한다. 제안하는 알고리즘에서 차선은 실세계 좌표에서 좌우가 평행하고 고정된 폭을 가진다 가정하며, 카메라 움직임을 고려한 연속된 영상들의 병합된 특징맵에서 B-snake를 이용하여 차선 검출과 카메라 외부 파라미터 추정이 동시에 수행된다. 실험을 통하여 카메라 외부 파라미터에 영향을 주는 주행 도로 환경의 변화에 강건한 차선 검출 결과를 확인하였으며, 추정된 카메라 외부 파라미터의 정확성은 전방 차량에 대한 레이더 실측 거리와의 비교를 통해 확인했다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.197-199
• /
• 2003

In this work, the Greitzer's B-parameter model is applied for analyzing the stall and surge characteristics. The four parameters in the model are highlighted in order to establish the influence of each parameter on the system. First of all, the governing equations of stall and surge behavior are solved numerically using fourth-order Runge-Kutta method. The Taguchi method is then used to analyze the results generated to obtain the extent of effects of the parameters on the system by varying the parameters in a series of combinations. Finally, a thorough analysis is carried out on the results generated from the Taguchi method and the graphs.

• 대한조선학회논문집
• /
• 제39권4호
• /
• pp.60-65
• /
• 2002

본 연구는 Form Parameter를 만족하는 선형 생성 과정을 최적화 과정으로 취급하였다. 목적함수는 fairness 기준을 도입하고 설계변수는 B-spline 곡선의 조정점으로 하며 제약조건은 설계자에 의해서 주어지는 기하학적 형상으로 하였다. 최적화 방법은 GA(Genetic Algorithm)와 최적성 기준(optimality criteria)을 병행하였다.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.562-568
• /
• 2009

Hull form generation and variation methods to be mainly discussed in this study are based on the fairness optimized B-Spline form parameter curves (FOBFC). These curves can be used both as indirect modification function for variation and as geometric entities for hull form generation. The flexibility and functionality of geometric control technique play the most important role for the success of hull form optimization. This study shows the hydrodynamic optimization process and the characteristics of optimum design hull forms of a 14,000TEU containership and 60K LPG carrier. SHIPFLOW has been used as a CFD solver and FS-Framework as a geometric modeler and optimizer.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.26-32
• /
• 1994

The Lloyd-Max algorithm is an iterative scheme for design of the minimum mean square error quantizer. It is very simple in concept and easy to program into a computer. However its convergence and accuracy are primarily dependent upon the accuracy of the initial parameter. In this paper, a new initial parameter which converges to a specific value when the number of output levels becomes large is selected. And an estimator using curve fitting techique is suggested. In addition, performance of the proposed method is shown to be superior to that of the existing methods in accuracy and convergence.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권5호
• /
• pp.332-337
• /
• 2004

A number of techniques have been developed for estimation of speed or position in motor drives. The accuracy of these techniques is affected by the variation of motor parameters such as the stator resistance, stator inductance or torque constant. This paper is proposed a neural network based estimator for torque and stator resistance in IPMSM Drives. The neural weights are initially chosen randomly and a model reference algorithm adjusts those weights to give the optimum estimations. The neural network estimator is able to track the varying. parameters quite accurately at different speeds with consistent performance. The neural network parameter estimator has been applied to slot and flux linkage torque ripple minimization of the IPMSM. The validity of the proposed parameter estimator is confirmed by the operating characteristics controlled by neural networks control.

• 전자공학회논문지B
• /
• 제31B권2호
• /
• pp.28-34
• /
• 1994

In this paper, a new time-domain parameter extraction method for speech recognition is proposed. The suggested emthod is based on the fact that the local peak-to-peak interval, i.e., the interval between maxima and minima of speech waveform is closely related to the frequency component of the speech signal. The parameterization is achieved by a sort of filter bank technique in the time domain. To test the proposed parameter extraction emthod, an isolated word recognizer based on Vector Quantization and Hidden Markov Model was constructed. As a test material, 22 words spoken by ten males were used and the recognition rate of 92.9% was obtained. This result leads to the conclusion that the new parameter extraction method can be used for speech recognition system. Since the proposed method is processed in the time domain, the real-time parameter extraction can be implemented in the class of personal computer equipped onlu with an A/D converter without any DSP board.

• 대한조선학회논문집
• /
• 제29권4호
• /
• pp.36-44
• /
• 1992

초기 선형 생성을 위한 B-spline form-parameter 방법의 개선을 위해 Form-parameter 간의 관계를 실적선 데이타 분석으로 Fuzzy 모델링하고, Fuzzy 추론을 통해 Form-parameter 값들을 도출했다. Fuzzy 모델의 유용성 확인을 위해 Fuzzy 모델에 의해 도출된 선형을 실제의 모델 선형과 비교했다.

• 전자공학회논문지B
• /
• 제32B권9호
• /
• pp.1171-1180
• /
• 1995

In this paper, we present a 3-D object recognition system in which the 3-D Hough transform domain is employed to represent the 3-D objects. In object modeling step, the features for recognition are extracted from the CAD models of objects to be recognized. Since the approach is based on the CAD models, the accuracy and flexibility are greatly improved. In matching stage, the sensed image is compared with the stored model, which is assumed to yield a distortion (location and orientation) in the 3-D Hough transform domain. The high dimensional (6-D) parameter space, which defines the distortion, is decomposed into the low dimensional space for an efficient recognition. At first we decompose the distortion parameter into the rotation parameter and the translation parameter, and the rotation parameter is further decomposed into the viewing direction and the rotational angle. Since we use the 3-D Hough transform domain of the input images directly, the sensitivity to the noise and the high computational complexity could be significantly alleviated. The results show that the proposed 3-D object recognition system provides a satisfactory performance on the real range images.